IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This value is used to authenticate rescue rootfs image
by verifying the squashfs file's sha256sum before use
(propagator-20140419+).
Looks like this check might be useful for other stage2
images as well but let's get started with this one.
Thanks Maxim Suhanov <suhanov/group-ib.ru> for both
http://www.forensicswiki.org/wiki/Forensic_Live_CD_issues
and propagator patches.
Thanks Maxim Suhanov (suhanov <AT> group-ib.ru,
http://www.forensicswiki.org/wiki/User:.FUF)
for taking the time to review regular-rescue image.
Note that there are more than just filesystems:
arrays, logical volumes and swaps aren't activated either;
startup-rescue >= 0.18 should make that clear enough.
syslinux shortcut handling is case-insensitive,
let's find yet another letter...
A variant of rescue that marks the need to be careful
towards block devices and filesystems thus reducing
the amount of auto-activation done by startup-rescue
(0.17 or newer).
Whoops, the very first build of a real distro with gfxboot
has shown that the label isn't picked up there... and things
are actually worse: iso.needscheck gfxboot test seems to look
up "check=1" in sectors where it might have been landing back
then but it's just not there by now; some kludgery is due in
branding-altlinux-sisyphus unfortunately.
Actually a copy of 10localboot.cfg with a different name
and sorting order so as to address #26608: there's no possibility
to make a LiveCD image that would boot itself by default if localboot
has been configured in.
It's only a partial solution as it doesn't override 10localboot
in case it's there already but a step in that direction...
The initial revision was brilliantly buggy: it is *so* apparent
that cdrom will never be actually used for rw slice that this
has evaded my attention rather completely.
"prompt" and subsequent first "label" were not separated
in any way while second "label" and forth were; let's make
the resulting isolinux.cfg a tiny bit more pretty.
There's a need for a separate boot target since
persistent storage is way slower than tmpfs indeed;
usbflash has a tendency for huge performance drops
given simultaneous writes in addition to reads which
are the bottleneck already.
make-initrd-propagator 0.18 introduced ext4 rw slice,
so the corresponding kernel module needs to be included
into stage1; see also #28289.
NB: not available on x86_64-efi (or hybrid GPT to be strict)
due to fragility of the hack being made: parted(8) panics
upon seeing that, and good ol' fdisk is unable to treat it.
NB: use/live/rw use/rescue/rx use/syslinux/ui/gfxboot
are unlikely to play very nice together due to the latter's
magic l10n: "session" label is taken by live_rw config snippet
and *is* translated in design-bootloader-source;
OTOH "rescue_session" is *not*.
The reason is that the most interesting live images by now are
installable ones, and while configurable boot order is not there yet
the "classic" livecd images will require manual choice to boot.
Thanks sem@ for reminding of that FR (which is still open).
Its immediate purpose was influencing the GRUB boot menu
*but* the implemented mechanism is actually a part of the
long planned text branding and might be further merged
into branding when hierarchical features finally chime in.
So let's get the naming straight before it breeds.
This trots along the TODO item on text branding
and hopefully helps Michael Radyuk (torabora)
with his feature request to tweak the installer's
"Install ALT Linux" label; as an example, Simply
will now offer to "Install Simply Linux".
This one was suggested by enp@ for industrial use where
some extra protection for the boot process might be quite
desirable.
If no syslinux ui was specified (the stock configuration paths
ensure there is one) or if it was set to "none" explicitly,
then there's no boot: prompt (let alone any menu).
If there's a need to ensure that the boot process is not
interruptable by Ctrl/Shift/Caps Lock/Scroll Lock.
An initial draft of it was done half a year ago but several tricky
thingies had kept the code from showing up as it was rather brittle
and incomplete.
This implementation involves quite a few changes all over the place
but finally works good enough for live and installer images.
Please pay attention to the versions of these packages:
- installer-feature-setup-plymouth (0.3.2-alt1+)
- branding-altlinux-sisyphus (20110706-alt2+ if used)
- plymouth (0.8.3-alt20.git20110406+)
See also:
- http://www.altlinux.org/Branding
- http://www.altlinux.org/Plymouth
- incompatible change (to fix the rather broken early style):
use/syslinux/ui-% is now use/syslinux/ui/%;
- default timeout changed to 9 seconds (long enough and keeps
the countdown in a single figure);
- added totaltimeout of 300 seconds;
- provided live kiosk images with almost-instant boot by default;
...and some other assorted tweaks here and there, sorry.
- parameter order fixed to "simple first, then those with args"
and documented as the preferred one (might be debatable, okay)
- added "lowmem" to live so it avoids a ramdisk but works off media
(it's a knob for propagator)
- added "fastboot" everywhere (but failsafe install) to make use
of Linux 2.6.29+ async controller initialization
- every snippet got a trailing newline so that isolinux.cfg is readable
And a fancy makefile to check for shortcut dups!
As noted by imz@ in #26608, a LiveCD is the more preferred
boot target to a local drive usually (just as was discussed
and implemented for ALT Linux 4.0 IIRC).
It's now possible to:
- make distro/server-ovz.iso;
- make distro/server-ovz-netinst.iso;
- publish the former image's contents on ftp.linux.kiev.ua;
- boot the latter (~17M) image and enjoy the netinstall ;-)
The catch is that the stage2 (altinst file) location has to be
hardwired into syslinux config snippet for things to happen
automatically -- even if it can be specified manually in case
of failure.
The other catch is that currently a netinstall image is somewhat
tied to the particular image it installs since stage1 kernel and
stage2 modules must correspond strictly (the typical symptoms of
the glitch would be missing mouse driver and weird "permission
denied" errors during an attempt to partition the hard drives).
It might be desirable to provide multi-distro netinstall image...
Back then I didn't come up with anything smarter than
"mkimage-profiles 2.0" (with my tongue in a cheek),
but as m-p has grown up to 0.4 it's time to fix this.
When done properly, all of the string should be brandable
(with some sane default value inheriting from image name),
but let's do it at least bit by bit.
The same change as in m-p-d f1c5dd0 (discussed in #22486).
Seems it wasn't the culprit regarding the "BIOS won't boot
off this DVD" but is also recommended in README.gfxboot.
This was tackled before but it took raorn@'s hint regarding
sys-freedos-linux (ms-sys has no bootsectors compatible with
freedos currently) and gns@' quick rush at make-freedos-floppy
script to wrap things up.
Should be further developed to become actually useful though.
- introduced generic stage2 subprofile (non-standalone)
- ported installer and rescue over to stage2/{install2,rescue}
- initial stage2/live (needs more work for sure)
- use make-initrd-propagator
- updated and somewhat extended doc/
NB: mind #26133, #26134
...and switch syslinux.iso over to it: syslinux-3.86-alt4's
(actually opensuse's) gfxboot hackery doesn't properly init
video mode so memdisk-started freedos has console troubles
(and yesterday's hdt.c32 hassles could be avoided as well
it seems). And that's being implemented.
Mid-term plan: try switching to syslinux4.
PS: CLI fallback was actually a bug in hdt from syslinux <= 3.86-alt3
Renamed server-light.iso into server-ovz.iso to avoid brand dilution
and confusion (rider@'s server-light rather favours kvm, anyways).
Introduced KDEFAULT: a reliable default kernel chooser knob
since apt's regex ordering proved pretty unreliable.
Spelling things explicitly is better anyways.
SYSLINUX related features undergone pretty major rewrite
(that includes syslinux, hdt and memtest).
The problem to tackle was features.in/syslinux/generate.mk
assuming syslinux and pciids available in build *host* system;
this well might not be the case (or worse yet, those can be
just different). So now we're a bit less elegant and a bit
more enterprise, stuffing things into chroot and working there.
Bunch of other fixes along the road, including ; to name a few:
- fixed memtest entry (overlooked while renaming SYSLINUX_ITEMS)
- new and shiny doc/CodingStyle
- gfxboot, stage1 target chain, hdt tweaks
- distro.mk rehashed
- README++
- TODO: dropped (integer overflow anyways)
+ actually moved off-tree to reduce commit spam
- s,\.config\.mk,distcfg.mk,g
- doc/profiles.mk.sample: sample ~/.mkimage/profiles.mk
- ...and assorted fixups/additions
Sorry for convoluted commit, this would have been pretty hard to
rework into some really readable shape (and you might be interested
in the original repo's history horrors then, anyways).
Now we don't dump all the gory details onto thee
but rather log them handsomely and present only
the most important details by default; use DEBUG=1
and/or BUILDLOG=/path/to/file to tweak.
Also introduced IMAGEDIR and IMAGENAME.
The rest:
- ovz-smp is no more
- base-l10n pkglist (suggested by Alexander Kuprin)
- clean.mk:
+ fixed an oversight: the test result erroneously applied
only to the first command of several ones that should be
run iff build/ is a symlink
+ drop implicit rules (it's no C code)
- Makefile: more reasonable iso names
- image.in/Makefile: .disk/date too
