IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
systemd-214 has major problems with starting these services,
and KDC should definitely not even try to start up before
setup (which is not feasible given that these are LiveCDs).
domain-client pkglist inhabitants and net-usershares feature
are nasty enough to bring a lot of extra garbage in unfortunately
(alterator-auth, alterator-kdc, alterator-net-shares involved).
Commit 78f2158 left those images which required NM but not
its applet explicitly broken (as in "no applet at all");
this should probably be redone alike to browser feature
but let's provide a 20140612 band-aid at least.
I thought about this again and came to conclusion that bringing
alteratord and ahttpd up or down should rather be done at the same
time as backends and frontend are useless without each other
(at least for your average sysadmin).
Matt Lewandowsky suggested that alteratord be enabled
but ahttpd be disabled so as to avoid extra port being
listened to out-of-box but to be able to turn web GUI on
when needed.
Suggested by frbrgeorge@ and sounds quite reasonable
given that live-rescue.iso is very immature yet and
there are only a few -- but compelling -- reasons
to provide a graphical rescue image, gparted being
one of them for sure.
The logic is pretty much the same as with live.mk,
even somewhat extended as this has actually been
the driver of this change: some images like icewm
or lxqt-based ones might show off other browsers
explicitly (in addition to zerg@'s request).
This should better lurk here unless someone (including myself)
either forgets or doesn't realize the inobvious chain of the
assumptions made for the read-only warranty to actually work.
This is actually downplaying: the net effect is that
a few images continue to carry krb5-ticket-watcher
and have avahi service enabled by default while most
of the images have one "weird" item less on their menus
and a few hundred kilobytes less in total RSS.
These are not really needed by default in lightweight
distros sporting reduced application and services set,
and the heavier ones will take relatively less hit
by default while being more ready as ALT Domain clients
(which was the whole motivation behind adding the feature
and the corresponding pkglist).
A virtual machine lacking DHCP client seems much less useful,
and being able to shut one down via emulated ACPI button press
seems like no luxury either.
led-ws kernel flavour has gained kernel-modules-vmware
recently, let's add this to the appropriate targets.
It's used in regular-jeos already but THE_ part was missing.
This should provide the fix for #30024 (thanks ildar@):
vmware relies on mptspi.ko by default and that's been
split out into scsi and not guest subpackage for led-ws.
BTW use/install2/vmguest instead of a bunch.
plasma-applet-networkmanager has been superseded by a bunch
of kde4-plasma-nm* packages; only the main one has been included
in regular-kde4 flavour since the switch resulting in the lack of
VPN/mobile connectivity options.
My opinion still is that plasma-applet-networkmanager should be
returned as a metapackage for p7/branch timespan so that images
could be built no matter whether it's sisyphus or p7 at hand.
Oh well.
Package has been prepared by shaba@ and sem@,
and it looks like ALT Linux with un-def kernel
is one of the few (or just the one) distribution
running on Hyper-V Gen.2 rather flawlessly
thanks to efforts by boyarsh@ and vitty@.
Just a convenient knob for a few things done previously
to help spare the interesting bits from being overrun.
NB: live_rw isn't added although it might be useful
since that would yield too many boot targets overall;
this is likely to change some day, hopefully when
media type detection/handling is implemented.
Let's bump syslinux timeout to 20 seconds either
so that iKVM users have a chance to select anything
and not just see the default booting after a few
screen area size changes.
This reverts commit fd8f375573.
xdg-su is broken (some would say beyond repair) regarding DE
detection and handling of various GUI helper utilities,
especially in graceful fallback department; only a few images
can get imagewriter until this is fixed, let kde4 be the one.
The whole story with this installer has been due to a query
at #altlinux whether there's a distribution image similar
to altlinux-p7-rescue.iso which appears to be booting under
Hyper-V Gen. 2 without a hitch; changing just the kernel
towards the newer one made the user rather happy since
everything worked out-of-box for him, even unimportant bits.
Of course it's mostly due to boyarsh@'s preceding work :)
NB: there's no use to build i586 version as that hypervisor
lacks CSM (BIOS implementation) and would only boot UEFI
compatible operating systems with pretty strict requirements.
It has dawned on me that gdm2.20 is more widely useful
within sysvinit based builds: lightdm with gtk greeter
would fail to poweroff/reboot while this one would not.
aen@ asked to ship this one as well; no problem given mixins,
still being able to *switch* the init instead of regrafting
would be very beneficial.
NB:
- wdm can't do autologin;
- wdm can poweroff/halt;
- wdm+autologin won't work under systemd (via prefdm.service);
- nodm will work under systemd;
- nodm will ruin consolehelper -> livecd-install by root's PATH;
- gdm2.20 is lightweight, feature complete and sovereign enough.
The reason for an explicit cleanup is that VNC installation support
is now left in by default (see #29901); thus this commit is only
keeping the status quo for this image.
It's still a GUI installer but pretty much barebone one by now...
in particular, it needs no xorg-drv-$hardware being mostly targeted
at VMs and demo appliances where fbdev is rather enough.
Cleanup extra kernel drivers too.
Current Sisyphus' xorg-drv-intel works somewhat better
with recent kernel drivers on my HD4000 GPU, and icewm
is not compositing at all; providing another test/backup
image fitted with newer kernel should do no harm.
This package has been built and recommended by cas@;
it requires Qt5 which hasn't been needed for anything else
included in regular builds so far so let's extend kde4 one
to begin with.
lightdm isn't going to turn off the system properly
with no systemd-logind around ("for no good reason",
that is); good ol' wdm for installed system and the
similarly ol' autologin just work though.
nodm is not gonna cut it since user PATH is weird
within the session breaking livecd-install by putting
/usr/sbin before /usr/bin while it shouldn't be there
in the first place.
As it happens regular-rc testing has shown that cinnamon,
gnome3 and kde4 flavours included NM via their pkglists
and dependencies (which used to result in live feature
enabling NetworkManager service wholesale when found);
now when handling default services has become more strict
it became apparent that these images have got their LiveCD
mode running without network by default (installation does
set that up though).
It looks like an easy way to just stick +nm into .regular-desktop
dependencies but then razorqt, sugar, xmonad would get NM which
is not what they're gonna handle; e17/e18 too.
Well actually it shouldn't -- except for rEFInd the boot manager:
branding graphics within the build environment are used to add
a single background image to EFI/refind/icons/ thus the change.
Wonder how this got lost though as this screenshot:
http://en.altlinux.org/File:Altlinux-rescue-uefi-memtest86.jpg
clearly illustrates it was working back in December indeed!
TDE images are pretty modest regarding resource consumption
thus suitable for older hardware; a slower flash drive can
stall indefinitely showing slideshow and not going any further
with actual package installation so let's put a cap on that.
KVM and VirtualBox support packages are pretty tiny
but essential when these images get deployed within
virtual environments for any reason, let's add 'em.
It's been gfxboot-free but no user visible facility to select locale
has emerged through these years; it's been decided to put gfxboot
until some text chooser is available (thanks aen@ for discussion).
This is a minimalistic ALT-based system installer tailored
for those who know how to bring up networking and apt-get
the packages they actually need; thanks frbrgeorge@ for
proposing the specification as well as sem@ and glebfm@
for discussion.
No mc, no glibc-locales, even no man and interactivesystem!
Packages included: apt basesystem openssh vim-console
PS: Sisyphus-based regular build is not the main goal though
thus the p7/branch {bri,klu}dge.
This image is largely a rebase of server-ovz.iso onto regular-server;
it's not feasible to provide a single image that would install either
"mini" server or openvz/kvm one based on user choice during boot alas
(even if both ovz-el and std-def kernels are provided within "ovz" ISO
and vzctl&co could be stuffed into a package list/group).
Maybe this is fixed some day...
I'm fed up with graphical software occasionally making it
into regular-rescue.iso and bloating it for no good reason
given that window managers or xinitrc aren't included.
Dank Bagryantsev asked if it could be added to available packages
at least; well it is there now but not in default install
as aptitude is currently unsupported.
This kernel can help save almost 50 megabytes of image size
and shave off several megs of RAM consumption as well which
is important after the installation has been through.
Adding rescue image was requested by Speccyfighter (in Russian):
http://lists.altlinux.org/pipermail/community/2013-December/681045.html
...and it seems hard but doable if one doesn't mind barebone rescue;
still efi-shell shouldn't spoil x86_64 build as that one won't fit CD-R
and doesn't have to anyways.
un-def got unsuitable due to initial ramdisk migrating from
initramfs to tmpfs by default in newer kernels, and propagator
was using pretty kludgy way to determine that /dev has been
mounted already; led-ws (and supposedly lks-wks) have stumbled
upon this earlier.
20130822 version has been fixed regarding that.
...instead of installer-distro-desktop which pulls in
alterator-auth which breaks things big time for sysv-tde
installer image due to avahi-daemon lazy to run.
Of course it's the last step of installation that has to fail.
And I've been considering this for several months already anyways.
It's proprietary now but still very useful with no free software
alternatives for UEFI platform so far; let's include efi-memtest86
into the rescue image at least.
distro/.regular-install depends on use/luks now too;
this isn't a hard decision but so far looks good
given the overall functionality range and balance
within regular builds.
I've been considering a way to avoid confusion between:
- a tde based livecd with systemd;
- a tde based livecd with sysvinit;
- a tde based installer with sysvinit
and finally came to conclusion that regular-sysv prefix
will be common for installers with sysvinit within regular.mk
and p7.mk; this might be not perfect but should be good enough.
Note that while regular-sysv-tde.iso is buildable and installs
just fine at the moment I don't plan to publish Sisyphus based
installer builds as a rule since these require extra knowledge
regarding daily use (starting with http://altlinux.org/changes
and/or https://lists.altlinux.org/mailman/listinfo/sisyphus ML
subscription).
Sisyphus-based rescue image is fine as well as LiveCDs are;
installable LiveCDs (most of regular-*.iso) are actually
risky in case user actually installs *and* updates those
having ignored the red "unstable" status in the branding,
and that's the line I'm not going to cross that often.
This image family doesn't inherit from distro/.installer
and thus could miss the bootloader setup with no problems
(at least until an installed system would attempt booting
without a bootloader).
The whole thing requires some more thinking over and probably
moving more bits to mixins but in the mean time let's make sure
the bootloader *is* configured.
distro/.regular-install is now factored out to be reused in
tde based installer (and potentially more images later on).
This implies sysvinit at the moment which might change too
but looks just fine right now.
I considered these two to be either close forks differing in init system
used (and things involved too much like NM at the moment), or to bring
some more choice along; this commit sticks with the former approach,
namely "let's only toggle the init system and let the rest be the same"
so that choosing the particular implementation can be based on this very
difference and not any other ones added along with it.
...so that locale is selectable at boot (unfortunately there's no
way to do that with text menu so far as cmdline is only changed
in its entirety there and generating it from the bits involved
is Not Implemented Yet as usual).
distro/.regular-sysv{,-gtk} intermediate targets are factored out
to form the base for more image targets as at least e17, icewm,
tde and wmaker are fine without systemd-logind. These represent
both GTK and Qt based environments hence the two footholds.
LUKS seems like a worthwile addition to this particular image;
it's also switched to use installer-distro-altlinux-server
for both LUKS support (until installer-steps are dynamic)
and server-oriented partitioning presets.
Make it automatically start in desktop ones,
and let it be available in rescue too (there's
a risk of gpm picking up a wrong protocol and
selecting/pasting at random which is not exactly
the right thing for rescue environment with root
shells all around).
It was a desperate kludge to warrant fallback localization
for cases when livecd-setlocale failed to work out properly;
"thanks" to systemd paralizing startup the order was chaotic,
see #28991 for some details.
Now that livecd-setlocale >= 0.3.1 looks like working this
should be dropped for good.
And the proper preset solution will be l10n feature.
That one requires part of alterator-sysconfig backend
factored out into a standalone package along with its data.
Few things:
- extend feature specification
+ SysVinit can be chosen explicitly via init feature,
no need to keep sysklogd in yet another pkglist;
+ power management should be included too
(both cpufreq setup and power button handling);
+ LILO seems to be heavily preferred among the
target audience :)
- use desktop installer for regular-server
+ the seeming controversy is explained easily:
installer-distro-altlinux-generic has very few
modules to the point of being inconvenient for
anything but quick rounds of basic testing,
and distributions rather do need network setup
along with a non-privileged user.
regular-xfce managed to lack NM somehow (so it even lacked
network after being installed since some build which wasn't
identified right away unfortunately); let's fix that either
during this small refactoring.
It was implemented in a pretty quick-and-dirty way
for regular-mate back then, clean things up a bit.
Package lists should be deduplicated either but
that's another story.
This has had several goals:
- a target suitable for x86 and armh providing a rather
minimal set of base xorg packages and generic drivers;
- task-oriented targets for graphics use cases:
+ "desktop" means rather 2D focus with 3D being welcome
or even essential but not performance critical, thus
"a slower driver is fine as long as it does work";
+ "3d" means specific 3D performance being critical,
that is "no 3D means no use at all".
Regarding the free and proprietary 3D-capable drivers:
the previous idea was to split out some common ground
and then add the contenders on top of that; the current
approach is based on the observation that the live images
requiring proprietary NVIDIA/AMD drivers *by default*
are usually of not much use with hardware that lacks
proper 3D acceleration (like Tseng cards) or the driver
support for that (like Matrox these days).
Intel videodriver makes for a special case though:
it is both free and top-notch performer.
Thanks sem@ and boyarsh@ for discussion.
PS: xorg-drv-{keyboard,mouse,void} dropped;
those who need these can usually help themselves.
...and switch to cinnamon-regular metapackage in general:
the remaining blocker being gdm required by that and not
actually going to work (it used to start gnome-shell which
wouldn't work in that configuration either) is now fixed,
thanks cow@.
PS: plymouth is moved upstream, drop the dup.
The installed livecd would lack fstab entries for the filesystems
other than those mounted explicitly during partition step; while
this might be considered either bug or feature, let's try that
and see.
The regular images became a bit too fat and rescueish
with all the good stuff going into rescue+extra pkglist;
that stuff does belong to dedicated rescue images but not
to each and every one.
The base+rescue pkglist has been tailored to take this
into account so we can now make regular-*.iso more fit too.
There's no NetworkManager or connman in this lightweight image
so let's put at least the lightweight connection specific GUIs
like this one; proposed on the forum by Speccyfighter and
acked by squire as useful for traffic-metered plans:
http://forum.altlinux.org/index.php/topic,28619.msg201159.html#msg201159
A syslogd is required by interactivesystem and we definitely
don't want any extra systemd on a sysvinit image.
Thanks Speccyfighter on the forum for the observation.
A duplicate has formed while factoring out bare target;
as currently only the rescue image uses it in a special way
and that one benefits from additional crypto packages as well,
let's put LUKS related packages into bare for the time being.
The persistent storage is a nice addition to LiveCD images;
it doesn't come for free though in terms of performance
(especially for the first boot), so it should stay optional.
Note that use/live/rw belongs to base and not bare since
otherwise rescue becomes rescue+live which is superfluous;
hence the special use/rescue/rw.
Whoops, and I was mildly wondering where are alterator modules...
thanks Speccyfighter again for bringing attention to the issue
which has turned out to be ultimately caused by an overlooked bit
being missing.
This one was just asking to be built for quite a long time;
http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs
specifically accenting use of smartmontools 6.0 has finally
persuaded me to roll out yet another rescue livecd, that is
on the regular basis.
The metapackage was fine, the "only one" additional package
was more or less okay, but there came a dozen more so it's
now reasonable to stash these into a separate pkglist.
...and refactored its use in cinnamon image too;
this isn't a permanent solution though,
slated to move into fonts feature.
Thanks gns@ for suggestion.
There isn't much sense to keep an entirely separate flavour
as deepsolver starts being actually useful and icewm is
a somewhat special flavour for those who know their ways
around Linux plumbing.
The various *8168 and friends among kernel modules
have finally been pushed into a designated target
so that RM doesn't have to care which particular
additional ethernet modules are available in this
particular branch and kernel.
Tweak distros as appropriate.
NB: *maybe* this is required by distro/.base either.
acpi_call is used far too often when dealing with the newer
portable x86 hardware, we're better off including it when
it's available.
regular.mk adjusted appropriately.
Richard and Theo would probably roll their eyes at this point
but the unfortunate reality is that wireless hardware is very
much dependent on firmware being explicitly provided; so here
it is.
rtl8192 kernel module added since it's present in t6/branch
at least.
This change mostly concerns with making icewm flavour
the lean one again.
The goal is to widen the dynamic range of regular image features:
icewm is not a desktop thus can bear withouth systemd-logind
even if a bunch of network-managing-media-mounting crap has been
rigged to depend on it, and ALT domain client should be included
in most builds for convenient testing in SMB environments but can
stay out of this minimal and "different" image.
It also receives the "un-def" kernel flavour (3.8.0 as of today)
which might benefit from the more available testing facility too.
Its branding is also simplified, plain syslinux menu is fine;
in similar vein, refind feature is flipped from icewm-only to
all-but-icewm set of images with its state being good enough
as of refind 0.6.7 and mkimage 0.2.7.
It'd be better for this commit to appear before 0.9.7
(and clobber the original one) but at least the added
functionality has been tested; time to generalize it.
enp0s3 is quite inferior to eth0 in terms of usability
even if it might be more convenient for the machine{,ry}.
Let's stick with what works here in ALT Linux (see #28484).
