IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This change is done to reduce ambiguity in some cases;
the previous intention has been to ease navigation when
staying in a particular directory, now it's been changed
in favour of convenient toplevel `git grep' in fact.
Both variants have their pros and cons, I just find myself
leaning to this one by now hence the commit. Feel free to
provide constructive criticism :)
Some path-related bitrot has also been fixed while at that.
The behaviour that sort of settled didn't actually follow
the principle of the least surprise when one really wanted
to have BUILDDIR available for inspection; DEBUG=2 would be
effective to achieve that but CLEAN=0 would not.
Thanks led@ for spotting and reporting this.
Overview of the changes:
- ARM support: separate ext2 /boot, no LILO
- avoid race condition with devmapper
- trap ERR so that -e in shebang doesn't result in extra cleanup hassle
- configurable root filesystem type (ext4 by default)
- jumps through parted hoops
Details:
1. LILO is x86-specific while the rest of the script can be used
to prepare e.g. Marvell ArmadaXP or CuBox images; we can generally
count on uboot supporting ext2 for relatively sane platforms but
not ext4 that would be a better root filesystem performance-wise.
2. Apparently /dev/mapper/loopXpY can be still missing at the time
when kpartx returns and pop up a bit later... sit there, wait
and check for it.
3. If something went wrong with any command of the script it would bail out
due to -e in shebang; it is now better to clean up the loopback device
and its mappings in this situation either.
4. One size doesn't fit all, really.
5. The parted sizing was sloppy as in broken, now it's just half insane.
Someone's decision to stick units and auto-alignment knobs into
a single one was apparently hilarious...
http://www.gnu.org/software/parted/manual/parted.html#unit
Manual loop/dm cleanup is described in documentation just in case.
/boot size meter is suboptimal in terms of additional I/O incurred,
will be most likely rewritten to make use of advance "du -s".
The original mkisofs would only care for the proper ISO9660 image
but we've switched to xorriso which is able to perform the hack
to yield UEFI hybrid images; thus no need for the postprocessing.
Requires mkimage >= 0.2.5 and xorriso (obviously).
See http://www.opennet.ru/openforum/vsluhforumID3/86239.html#1
for a query that has led to this one; in particular,
- xdm dropped (won't log in root and there are no users yet);
- network is brought up and configured via DHCP by default;
- apt-get works out-of-box;
- default image size is twice the chroot size.
Another feature suggested by Michael Radyuk (torabora):
some images are known alpha/beta quality, it's more handy
to just state this at the build time than to rename by hand.
The prerequisites for a cleanup after a successful build
were somewhat weird at this point; now the rules are:
- if DEBUG level is more than 1 or CHECK is set, don't do it;
- otherwise if at least one of the following conditions is true:
+ there's more than one target being built in a row;
+ the build was run by e.g. alterator-mkimage;
+ metaprofile directory is read only
...then do a distclean.
If these are still weird or feel unsuitable for profile hacking,
drop me a note (or a patch).
As it happens, adding another architecture required almost no changes;
native 32-bit ppc build took only ARCH and a repo, qemu-ppc one still
has problems (/.host/entry hangs while unpacking setup for fakedata).
Proof of concept on a QS22:
$ make ve/bare.tar.gz
** ARCH: ppc
/bin/sh: rpmvercmp: command not found
21:41:01 cleaning up
21:41:03 initializing BUILDDIR: build/
21:41:03 preparing distro config
21:41:05 starting image build (coffee time)
21:42:48 done (1:42)
** image: $TMP/out/bare-20120716-ppc.tar.gz [21M]
The only thing to be fixed was setarch(8) symlinks assumption
that is correct for x86 but not for ARM.
There's also some hasher(7) setup to be done:
mkdir -p ~/.hasher
echo >> ~/.hasher/config <<-EOF
def_target=arm
#cache_dir=$HOME/tmp # depends on RAM/storage configuration
EOF
...and of course apt(8) should be properly set up too.
An example PoC build on a CM-A510 board (tmpfs):
$ make BRANDING=altlinux-centaurus ve/bare.tar.gz
** ARCH: arm
18:10:45 initializing BUILDDIR: build/
18:10:45 preparing distro config: build/distcfg.mk
18:10:46 starting image build: tail -f build/build.log
18:14:49 done (4:02)
** image: $TMP/out/bare-20120706-arm.tar.gz [23M]
Minor tweaks to toplevel docs as well as some doc/*.txt,
doc/variables.txt renamed to doc/params.txt, and a brand new
doc/pkglists.txt is added (thanks manowar@ for his considerations).
