IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Why would anyone try to remove apt when it's needed
for package dependency tracking for the installation,
it only takes a less cursory look at the build.log
to figure out it didn't actually happen anyways...
An initial draft of it was done half a year ago but several tricky
thingies had kept the code from showing up as it was rather brittle
and incomplete.
This implementation involves quite a few changes all over the place
but finally works good enough for live and installer images.
Please pay attention to the versions of these packages:
- installer-feature-setup-plymouth (0.3.2-alt1+)
- branding-altlinux-sisyphus (20110706-alt2+ if used)
- plymouth (0.8.3-alt20.git20110406+)
See also:
- http://www.altlinux.org/Branding
- http://www.altlinux.org/Plymouth
Just like livecd-install, graphical installer KMS support
looks better as an optional part of install2 feature.
Of course it's optional only if the release manager is fine
with VESA drivers and not KMS-requiring intel/radeon/nouveau;
thanks led@ for a confirmation just in case.
This further refines the modular build by making
metadata being a clearly separated feature rather
than having to rely on runtime tests, and also by
moving the code which cares for kernel bits of base
installation (.base list) in a feature of its own.
There's more to it but let's get the ball rolling first.
Initial SPICE support has been added for kvm/libvirt installation
and boot-up using qxl and spice by default as proposed by shaba@.
VirtualBox part is shifted a level deeper correspondingly
but otherwise stays the same.
There's much reason for reuse instead of duplication
among the different stage2-based subprofiles.
In particular, the rather monolithic driver cleanup script
of the ancient is better done in several clear pieces with
the final depmod run.
Scripts dropping apt/rpm databases will dump pkglist first.
A script purging /boot/* will honour live-install if present.
Minor inno^Wfixups all over the map too.
As it happens, I've stumbled upon a successfully built image
with alterator-grub in BASE and lilo in install2's installer-steps.
Of course the installer bailed out after dealing with packages :-/
Thanks Leo-sp50 for pointing out the (hopefully) right direction.
So far the tagged scripts concept is too fragile,
and these were used unconditionally anyways.
features.in/Makefile is broken regarding copying
tagged scripts right now...
As too many things started duplicating between distros proper
and (e.g. corresponding) LiveCDs, it became apparent that a class
of entities which end up working for THE_USER (not a sysadmin,
and not a developer, just a Linux user) is in need.
So THE_KMODULES will power installed basesystem and live image,
while THE_PACKAGES, THE_LISTS and THE_GROUPS will participate
in building those.
The features might get copy-pasted (or even copied-and-pruned)
when initialized; there's an unneccessary duplication of the
function name in the line adding it to FEATURES list, thus
prone to being forgotten and causing some havoc later on.
It was wrong in the first place but tackling this with some
double-colon rules ran into terminality issues, and further
tortures were considered unneccessary.
The current solution isn't perfect (no completely transparent
function name registration upon corresponding target being called)
but at least it is an improvement...
install2 cleanups:
- functionally indifferent ones: particularly, install2/*/98system's
"mkdir -p /image" was superfluous as it was done by that time already
by sub.in/stage2/image-scripts.d/00stage1
- taken apart, prepared for tags: so far it's a mostly moot change
since the installer cleanup scripts themselves are mostly the same as
preceding 90cleanup was (with some additions corresponding to recent
kernel development); it's still unclear what the mechanism for
configuring the cleanups in effect will be, either directory/package
regex lists or tagged scripts excluded from execution by yet another tag
fixes:
- image.in/Makefile: fix metadata related test; the actual test was
assuming that stage1 kernel means installer, which is not the case
since generic stage2 introduction; oh well
- 85cleanup-lowmem: a "_" too much was the culprit in destroying the
needed translations along with those deemed superfluous; thanks go to
Oleg Ivanov and Lenar Shakirov for finding the bug and proposing the
fix altogether
additions:
- features.in/Makefile: reworked help target; it was rather inaccessible
due to BUILDDIR normally undefined at the time of direct make
invocation, and BUILDDIR is normally defined during normal builds
anyways so let's try it this way.
- README++
daydreams:
- 01-genbasedir: we should drop bzip2 compressed pkglists some day
but see genbasedir and apt-cdrom first, 90-pkg.sh (alterator-pkg)
will fail miserably otherwise
Applying set() and only set() to a GLOBAL_* is safe
but still a potentially confusing example; so let's
just do it right (and warn unsuspecting folks too).
This is a sort of anti-feature which removes and not builds;
still with mkimage-profiles' approach we can at least build
up the removal procedures as well.
It's what triggered the tagged scripts, BTW.
It was clear that "common" isn't very apt for packages that
will get *everywhere*, and became apparent when the need for
a "base+live packages" variable arrived with powerbutton feature.
So:
- the former COMMON_PACKAGES are now SYSTEM_PACKAGES;
- COMMON_PACKAGES act as "BASE+LIVE_PACKAGES".
Note that SYSTEM_PACKAGES also got factored out from stage2 based
features into stage2 subprofile itself; cleanups were due as well.
It's still very immature -- base lists should be really base,
and functionality should be sorted out in more consistent way.
So far moved to tagged lists (which need some more experimentation
anyways to get both lists and their use more elegant).
- fixed live.iso (now actually useful):
+ extra cleanup was being done (coming from install2 case)
+ root user was password blocked
+ there was no unprivileged user (added "altlinux" w/o password)
+ added xdm setup hook for future X-based livecd flavours
+ several picks for a less slim "base" list
+ xdm login
- tweaked rescue.iso (added ext3grep)
- introduced generic stage2 subprofile (non-standalone)
- ported installer and rescue over to stage2/{install2,rescue}
- initial stage2/live (needs more work for sure)
- use make-initrd-propagator
- updated and somewhat extended doc/
NB: mind #26133, #26134
