IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Commit 657c0bf has silently added use/bootloader
to the base use/install2 target thus breaking
experimental distro/netinst; it seems better to
require *a* bootloader in the target that's been
specifically designed to cover the common case
(thus linked to by +installer shortcut) but still
to have our base lightweight and flexible.
This doesn't hurt the actual distros as these use
+installer of course.
The former approach to handling "LiveCD with sessions"
has been to mangle "automatic=method:cdrom" into
"automatic=method:disk,label:ALT*" within gfxboot
so that propagator and make-initrd-propagator would
try and discover/create a filesystem labelled
"alt-live-storage" on a LiveFlash's free space.
Then "live_rw" handling has been unified in
make-initrd-propagator (as of 0.18-alt1) to accept
any of "label" subparameter or "live_rw" argument
to go and create_disk_slice().
Then propagator's cdrom.c has been fixed to actually
try sdX1 before sdX (as of 20150306-alt1).
And now it's all been tested to verify that:
- flash "ro" and "rw" boot is OK
- CD-ROM "ro" boot is OK
- CD-ROM "rw" boot is fine given that there's
a partition labeled "alt-live-storage" elsewhere
This is a can of worms indeed :-/
References
~~~~~~~~~~
* http://altlinux.org/initrd-propagator
* http://altlinux.org/make-initrd-propagator
* http://bugzilla.altlinux.org/28289
It's entirely unclear to an unsuspecting curious user
where the actual results of a proposed example hasher
build end up; that's ~/hasher/repo, just state that.
The former install2-only "bloated binary" purge script
happened to hit stage2 (which is a lot more than just
install2); a kind of safety net has been stuck into it
to guard installable LiveCDs against this particular
cleanup but seems it was not enought for ildar@ who
reported this problem almost three years after it was
introduced.
This change re-places the script back into install2
section; the binaries in question amount for ca. 8 Mb
(except openssl ildar@ asked about); if these are deemed
unneccessary within any other stage2-based subprofiles,
please step up with details.
use/vmguest/vbox/base used to pull in DRM modules
which are required for vboxvideo but useless without
xorg bits; and all of these aren't needed in jeos.
Things might break, doublecheck please.
When installer-feature-systemd-stage3 hits BASE_PACKAGES
it pulls install2-init-functions in which is wrong
(one of the consequences is that alterator-browser-qt
lands into even a very basic server installation).
And install2 doesn't even need that package as init feature
carries a script hook that does the same...
This project has evolved/merged into LXQt which has been
packaged for both p7/t7 and sisyphus by now, no need to
carry on deprecated bits.
NB: 0.6.x still have it as t6/p6 still bear razorqt.
The installer feature added is a trivial wrapper around
apt-cache nodeps to uninstall the ^lib packages that have
no more dependencies upon those when the temporarily
installed packages like alterator-browser-qt get removed.
This has only been useful for plymouth feature,
and +installer shortcut included this target
for all the wrong reasons as it seems today
(thus blocking the DRM-free server installers,
for example).
This authorized_keys file has been downloaded to get incorporated
into a script hook but was looking common enough to be forgotten
during pre-commit feature cleanup unfortunately; fix that.
A few more leftover libraries tend to hang around after
purging extra alterator packages that have fired already
during installation stage3; this change might hurt someone,
please do notify if that is the case (OTOH one isn't forced
to use it or to inherit intermediate targets that do so).
This feature operates LIVE_* variables specifically
(as opposed to the more generic THE_* ones) so +alsa
isn't exactly suitable but reusing the pkglist that's
just been factored out is fine.
Split package lists:
- base alsa packages (also needed in pulseaudio-based installations)
- additional alsa packages (needed only if not using pulseaudio)
- pulseaudio packages
live-webkiosk.iso regressed into trying to boot off the local disk
immediately, the exact cause is not yet discovered but this one
has popped in build trace (distcfg.mk) already.
Desktop images are still likely to depend on it though.
There were quite a few things missing:
- packager pseudo for both rpm and hasher;
- proper target (so that i686 or athlon don't confuse people);
- hasher repo for apt so that mkimage would use it too;
- last but not least, a friendly bootstrap message! ;-)
THE_* and friends are all unneeded for live builder image;
this commit makes dev feature basically incompatible with
install2 feature (which relies on the conventional behaviour
of main subprofile), will have to think it all over if the
combination of these two ever becomes needed.
The problem with initial implementation (commit 62e7e9c)
is that there's no systemd-services package in p7/branch
thus apt complains about an attempt to remove something
that doesn't even exist in the first place.
Aimed at live images at first but should cover installers as well.
This has been brewing for quite some time and while the proper
implementation is considerably more complex (and hard to do)
looks like there's demand for the particular important use case,
namely LiveCDs for Russian users, so this code has been shared
with a few people before merge.
E19 would ask the user if they want to shut down
when facing power button event; it won't get a chance
though as the system will hurl down immediately as per
acpid-events-power package provided configuration.
This should avoid ruining principle of the least surprise
with ROOTPW_EMPTY=0 or ROOTPW_EMPTY=n actually *enabling*
empty root password; overriding an already set "1" with "0"
becomes possible either.
This one has been inspired by these guys:
http://www.informatimago.com/linux/emacs-on-user-mode-linux.htmlhttps://raymii.org/s/blog/Vim_as_PID_1_Boot_to_Vim.html
It's aimed at building images running their main userspace
piece instead of ramdisk's init, that means PID=1, UID=0.
Mostly fun of course but it suddenly became interesting with
kernel IP autoconfiguration and e.g. elinks running this way
(NB: requires patched make-initrd 0.8.8 at the moment to get
resolver configured).
And startup times are way better than sysvinit and systemd combined!
This function's got its argument order chosen for "aesthetical"
reason of $(2) following $(1) in the macros but the logical order
is exactly the opposite: we care for kernel flavour much more than
for module set (which is dependent upon it).
So while silent dropout of kernel-image if KFLAVOURS is set
but KMODULES is empty could be fixed by testing for $(2) only,
it looks like a good time to fix this discrepancy altogether.
stage2 has been thinking it's synonymous with propagator
and used to usurp kernel's belongings either; carefully
tear scripts apart so that kernel feature makes sure
initrd gets generated, and stage2 (which is still all
about propagator) cares for its bits.
xorg-drv-vmware is desirable for guests with X11
but undesirable for text-only ones; let's provide
this knob at least but ideal m-p would figure out
that an image with use/x11 and use/vmguest/vmware
should receive this intersection either.
Maybe firmware feature should be merged into kernel feature
as the firmware binaries added by it are only used by kernel
but let's clean up a bit at a time.
"use/stage2/net-eth use/net-eth" would be common enough
for installers or livecd images to just get these pulled in
together by a convenient shortcut thus reducing confusion
and chances to just forget one of these counterparts.
It looks *ugly* on-screen, at least within regular builds,
even if the screen is 166dpi.
Based on a quick experiment this morning I'd suggest using
fonts-otf-adobe-source-{code,sans}-pro instead -- and it's
available as use/fonts/otf/adobe now, incidentally.
The documentation is still built with it though as a2x/fop look
unhappy otherwise (as in replacing Cyrillic glyphs with "#"s).
Font packages are sprinkled all over the metaprofiles,
let's try and help make their use more systematic.
This is a sort of a feature abuse as it was conceived
for fontconfig setup originally but spawning features
with confusing names looks grim; so let all things fonts
live within a feature named "fonts" for the time being.
There's not much sense in overduplication of documentation
(tends to get stale faster then), still it's not good to
just refer to the code as the PDF/HTML book is less useful
then; maybe drifting towards "recommended" bits with more
"advanced" things being impleentation-defined is better.
That's a part of ALT Linux conveniences: system log
messages at tty12 (helps immensely in case of disk crash
or cable problems as running anything, including utilities
to view logs, becomes painful to impossible in such cases).
systemd lacks this kind of setup out-of-box for sure
so zerg@ hacked a substitute together; just pull that in.
fonts-ttf-droid have been superseded by fonts-ttf-google-droid-sans
in Sisyphus which might be lacking; I've considered replacing it
with Fira anyways, so let's just do that.
This needs further refinement regarding p7/t7 specifically:
NM behaviour regarding defaults differs in sisyphus and this
has led to livecds booting with DHCP networking but installed
systems booting without configured interfaces.
Non-GUI packages moved to base+nm pkglist to enable standalone
installation of those; and GTK bits left in desktop+nm for use
by images lacking their own new and improved(tm) variant.
Note that both GNOME3 and KDE4 aren't lacking anymore.
This is a similar trouble: p7/t7 branches had
plasma-applet-networkmanager while sisyphus has
switched to kde4-plasma-nm* (there's a bunch of
subpackages there, basically all of them desired).
The current branches lack both firefox 29+ and
firefox-classic_theme_restorer, correspondingly;
sisyphus has those; the feature shouldn't pose
any problems in both cases, should it?
Firefox was the very reasonable default for initial livecd
implementation but now that at least initial browser chooser
infrastructure is in place it's time to un-hardwire its use.
It's _the_ default but switchable now so that images providing
a comprehensive browser can avoid feature duplication.
This one has been asking to be implemented for too long already,
and zerg@ was interested in a bit more lean and mean regular-kde4
either (there are two browsers provided with it via metapackage).
There's another reason to do it recently: Firefox Australis UI
is not exactly the best for many of us, and good ol' seamonkey
seems preferable for "vintage"/low-resource images coming with
icewm or windowmaker.
led-ws kernel flavour has gained kernel-modules-vmware
recently, let's add this to the appropriate targets.
It's used in regular-jeos already but THE_ part was missing.
dm service is set up to autostart when installed anyways,
and explicit `chkconfig dm on' results in it being turned on
at runlevels 2, 3 and 4 too which is really not needed.
Thanks led@ for spotting and reporting this.
cfg.in/README should be explicit regarding
"automatic=method:cdrom" being usable for
flash media too (propagator has been fixed
since 20101130-alt10 or so, and gfxboot is
able to tweak the cmdline having figured
out it's running off the flash either).
It's by no means substitution for proper l10n feature
but forcing users into POSIX locale for recovery ops
is no good at all.
This is basically a fork of live feature's 20-locale,
a font has been changed to save some face though.
VMware specific bits went into use/install2/vmware target,
and all of those targets are worth their use/install2/vmguest
collective one instead of just sticking the kitchen sink into
use/install2/full immediately.
This feature intrinsically depends on predictable
ethernet interface names and makes no sense without
those; so it only seems reasonable to bring this
nice package in, huge thanks go to shaba@ of course.
This value is used to authenticate rescue rootfs image
by verifying the squashfs file's sha256sum before use
(propagator-20140419+).
Looks like this check might be useful for other stage2
images as well but let's get started with this one.
Thanks Maxim Suhanov <suhanov/group-ib.ru> for both
http://www.forensicswiki.org/wiki/Forensic_Live_CD_issues
and propagator patches.
Thanks Maxim Suhanov (suhanov <AT> group-ib.ru,
http://www.forensicswiki.org/wiki/User:.FUF)
for taking the time to review regular-rescue image.
Note that there are more than just filesystems:
arrays, logical volumes and swaps aren't activated either;
startup-rescue >= 0.18 should make that clear enough.
syslinux shortcut handling is case-insensitive,
let's find yet another letter...
A variant of rescue that marks the need to be careful
towards block devices and filesystems thus reducing
the amount of auto-activation done by startup-rescue
(0.17 or newer).
This is a refactored result of Zabbix-related experiments;
we can do a rough zabbix server sketch that still requires
its own setup to go.
NB: both the pkglist and the target are describing several
distinct things actually: zabbix server, zabbix agent,
and the underlying SQL/HTTP/SMTP servers which might get
their own smaller targets some day.
It appears that live feature has been buggy regarding user
groups: its 30-users script would create a predefined account
with fixed supplementry groups list, and even if deflogin feature
got used too it would fail to add any groups to already existing
account since its useradd(8) call would fail.
Let's drop this duplication which has been long overdue anyways.
Thanks dd@ for both reporting the problem and carrying out
initial investigation.
There have been several problems with this feature:
- a typo;
- non-existant GROUPS (even a single one) would block setting
all of the supplementary groups but separately-set 'wheel';
- this feature isn't used much actually so sees no battle testing.
The typo has been just fixed; GROUPS are now applied by iteration
which is less effective but more reliable; an additional script
hook to write down login invitation for the first passwordless
account (if any) has been implemented; and several more group
managing targets have been added (based on live feature's script).
This relates to commit f2892ad3e4
as there's an obvious need to be able to set empty root password
for LiveCDs but previous implementation was very fragile (and is
going to stay that way) -- so clear and separate knob for making
an image defenseless looks better.
Whoops, the very first build of a real distro with gfxboot
has shown that the label isn't picked up there... and things
are actually worse: iso.needscheck gfxboot test seems to look
up "check=1" in sectors where it might have been landing back
then but it's just not there by now; some kludgery is due in
branding-altlinux-sisyphus unfortunately.
No use to hunt make or diff file-by-file.
Well this chroot should have been more lean
in the first place (or a few files in initrd)
but life is short so better use/baby/steps.
This one is quite different already and utility-based name
was pretty clumsy; meet the new feature and retire the old
experimental one.
Please note that quite aggressive cleanups are implemented
within this stage2-based subprofile for the simple reason
that it has a single task to do; nothing else is expected
to be configured into it for that matter.
This functionality asks to be further moved into initrd of course;
adding it there will take a few more decisions to be made, mostly
regarding user interaction in failure scenarios, and it looks like
mkimage will have to be patched in case this doesn't just go into
full.cz under some sort of conditional check.
It's not exactly obvious how install2_size, live_size or rescue_size
get defined since the variable names themselves get constructed;
help git grep these down.
acpid is not enough since power button handling configuration
has been split apart; and tracking this in zillion places is
utterly useless in face of a specially trained power feature.
Just use it.
This one has been missing for quite some time (infiniband modules
should have triggered a commit like this back then), finally there
in very crude and draft form for the starters.
By the time these hooks run the font packages' %post scriptlets
should have fired already; no need to carry the utilities on.
Yes these are bit-by-bit savings. No it's too expensive still.
My gut feeling is that we're not going to see glib2's
messages a lot within installer environment anyways.
And there's a forgotten /usr/share/X11/locale/ too.
An installer needs video playback acceleration
when it has some content to show and some means to;
as long as these are not supported just drop this
unconditionally.
These are only needed for alterator-vm when making
LUKS encrypted partitions; ideally the extra libraries
would be omitted automatically when luks isn't included.
Looks like today's xorg won't autoload radeon_drv but
insists on ati_drv falling back to fbdev if it's not there;
FlightGear runs definitely slow on C-60 APU with that.
I didn't specify ati since it pulls r128 and mach64 modules in
which are rather useless in this context (accelerated 3D graphics).
Looks like nodm doesn't reset the PATH set within
/etc/rc.d/init.d/functions which results in sbin
path components hitting user's PATH; livecd-install
which uses consolehelper was what broke first for me.
And this link should illustrate some of the problems
tackled by this kind of scripts...
Servers can POST much longer so having to play hide and seek
with a boot menu isn't going to be exactly entertaining;
let's bump the delay to something comparable at least.
Thanks hiddenman@ for mentioning the obvious-but-unnoticed.
We don't really want to disable NFS portmapper completely
but having some extra root code listening to the world is
really unneccessary unless explicitly required.
Applying "control rpcbind local", thanks ldv@ for advice.
50-setup-network was a hasty hack (surprise!) that used to do
what net and net-eth features have been created to do since;
just drop the duplicated crufty code.
Unconditional resolver setup isn't done now: those with static
setup are better off doing it explicitly, and those with DHCP
should be fine already.
NB: /etc/hosts *is* fine within setup package *but* hasher will
overwrite it with a copy of host's one; let's reset contents
to initial at least until hasher gets fixed and the fix is
rather deployed in the wild.
There was an extra DISABLED=no line written to interface configurarion
that's been superceded by the subsequently added parametrized one;
just drop it.
Thanks glebfm@ for spotting the garbage.
It conflicts with r8169.ko inobviously.
The whole mess looks like this:
- r8169.ko doesn't work for all of Realtek 8111/8168/8169 mutations
- r8168.ko works with some of the chips r8169.ko doesn't
- r8168.ko also works with many chips r8169.ko works with
- r8169.ko is provided by kernel-image package (thus default)
- r8168.ko is provided by kernel-modules-r8168 package (optional)
- kernel-modules-r8168 package requires r8168-blacklist package
- r8168-blacklist package is a one-liner that blacklists r8169.ko
- STAGE1_KMODULES wouldn't include r8168 (std-def) or rtl8168 (led-ws)
- sub.in/stage1/modules would mention r8168.ko (m-p-d: r8169.ko)
So a LiveCD built with use/kernel/net might work with RTL8111/8110
just fine when booted live but fail to automatically load the module
when installed onto hard drive; manual modprobe r8169 would work though.
NB: some of the chips (those available to me) would work just fine
both ways -- this has contributed to fixing this *that* late.
Bottom line:
do not install backup/kludge drivers overriding main ones by default!
Thanks sem@ for providing the crucial hint.
use/deflogin will result in ROOTPW being exported no matter
is it set or not; xport() can't check before exporting as it
relies on lazy evaluation when the actual ROOTPW value can be
set or modified after exporting GLOBAL_ROOTPW for mkimage.
So let's not even pretent we can differ unset ROOTPW from
empty ROOTPW: both result in empty GLOBAL_ROOTPW as of today.
Fixing this would require moving the exports into a separate
makefile being included after all the configuration and checking
each variable for being defined before exporting the corresponding
GLOBAL_ prefixed one.
Yes this might be a security fix in some cases.
Added use/branding/slideshow/once as one of the uses
albeit the interface is universal; see this page for
more info: http://altlinux.org/branding/slideshow [ru]
The service and initscript have "connmand" name
while the package is called "connman" indeed.
Shame on me; this became apparent
while building regular-e18-sysv.
Defining a one-time variable is useless in this case,
and README should state the undefined ROOTPW status
explicitly (since it's now as advertized, heh).
This change is done to reduce ambiguity in some cases;
the previous intention has been to ease navigation when
staying in a particular directory, now it's been changed
in favour of convenient toplevel `git grep' in fact.
Both variants have their pros and cons, I just find myself
leaning to this one by now hence the commit. Feel free to
provide constructive criticism :)
Some path-related bitrot has also been fixed while at that.
It's required for NFS mounts but having a rescue image listening
to any non-localhost ports is too bad an idea, IMNSHO.
So let's fix this while spotted.
OpenVZ related part is now a reusable use/server/ovz target,
and service related groups which have been largely taken from
rider@'s server-light project are now use/server/groups/base.
The use/x11/nvidia/optimus target will pull the bits required
to operate NVIDIA Optimus GPU scheme which relies on integrated
GPU to actually drive the screen; much thanks to barssc@ for
good walkthrough: http://altlinux.org/optimus
NB: this *will* break if nouveau gets in, YHBW.
"messagebus" service is autostarted since dbus gets in being required
by wpa_supplicant <- alterator-net-wifi <- alterator-net-eth; it is
really not needed in the minimalistic server, let's just turn it off.
"lvm2-lvmetad" service requires setup to be actually useful (#29474).
This is long overdue: services feature influences live
and rescue but doesn't do anything to the installed system
as that's behind the installation barrier; some piggybacking
required to do that has been merged into installer back in
2012 apparently (thanks to boyarsh@ for both doing that and
bringing my attention to this fact; it's 65-setup-services.sh
as of today).
So the only thing missing has been the bridge to prepare
those files -- still some more tweakery is required given the
two-stage process arranged so that reusable configuration could
include some sane defaults but the release manager is ultimately
able to override anything without extra kludges; thank legion@
for his wonderful libshell either.
NB: install2 script is a partial clone of rootfs one since
processing the variables is identical; still rootfs script
has to change service state directly while install2 one
has to deposit the information for installer to handle.
use/live/textinstall target is a base for those images whose
target audience tends to be somewhat more experienced; these
might prefer to just boot off the image instead of having to
perform any extra action like pressing down arrow and enter.
This is also to help msp@'s homeros-*.iso boot immediately.
Actually a copy of 10localboot.cfg with a different name
and sorting order so as to address #26608: there's no possibility
to make a LiveCD image that would boot itself by default if localboot
has been configured in.
It's only a partial solution as it doesn't override 10localboot
in case it's there already but a step in that direction...
A hint regarding livecd-net-eth is due -- as well as
review and cleanup of live, net, net-eth features
involved in configuring that ethernet for a LiveCD.
