IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Its immediate purpose was influencing the GRUB boot menu
*but* the implemented mechanism is actually a part of the
long planned text branding and might be further merged
into branding when hierarchical features finally chime in.
So let's get the naming straight before it breeds.
That sub/stage2/install2 was somewhat clumsy actually as it looked
like a hierarchical thing while being a substitution thing:
generic stage2 would get put in place renamed as install2.
This could only get worse with hierarchical features which have
already been both requested and considered for quite a time,
and "stage2 at install2" reads much more naturally.
This trots along the TODO item on text branding
and hopefully helps Michael Radyuk (torabora)
with his feature request to tweak the installer's
"Install ALT Linux" label; as an example, Simply
will now offer to "Install Simply Linux".
This one was suggested by enp@ for industrial use where
some extra protection for the boot process might be quite
desirable.
If no syslinux ui was specified (the stock configuration paths
ensure there is one) or if it was set to "none" explicitly,
then there's no boot: prompt (let alone any menu).
If there's a need to ensure that the boot process is not
interruptable by Ctrl/Shift/Caps Lock/Scroll Lock.
The problem was spotted by Alexander Bandura:
bin/tar2vm wasn't present in the generated profile.
I considered extending features.in/Makefile to include
bin/ alongside lib/ but that would make the helper's location
unpredictable (unless BUILDDIR is specified explicitly) so
restricting sudoers would be harder; worse yet, the copied file
would come with write access for the user building an image.
The implications in restricted case are complex enough anyways
so the recommended implementation would only include a fixed
readonly location like /usr/share/mkimage-profiles/bin/tar2vm
as laid out in doc/vm.txt, and that means it's in the metaprofile
not a generated profile.
An initial draft of it was done half a year ago but several tricky
thingies had kept the code from showing up as it was rather brittle
and incomplete.
This implementation involves quite a few changes all over the place
but finally works good enough for live and installer images.
Please pay attention to the versions of these packages:
- installer-feature-setup-plymouth (0.3.2-alt1+)
- branding-altlinux-sisyphus (20110706-alt2+ if used)
- plymouth (0.8.3-alt20.git20110406+)
See also:
- http://www.altlinux.org/Branding
- http://www.altlinux.org/Plymouth
As duly noted by glebfm@, branding issues need more attention
by now since only stage1/install2 got some of it so far in this
regard. Hence the dedicated feature comes to the rescue
(well no, it doesn't actually mess with rescue!).
- incompatible change (to fix the rather broken early style):
use/syslinux/ui-% is now use/syslinux/ui/%;
- default timeout changed to 9 seconds (long enough and keeps
the countdown in a single figure);
- added totaltimeout of 300 seconds;
- provided live kiosk images with almost-instant boot by default;
...and some other assorted tweaks here and there, sorry.
There's much reason for reuse instead of duplication
among the different stage2-based subprofiles.
In particular, the rather monolithic driver cleanup script
of the ancient is better done in several clear pieces with
the final depmod run.
Scripts dropping apt/rpm databases will dump pkglist first.
A script purging /boot/* will honour live-install if present.
Minor inno^Wfixups all over the map too.
As was noted by Alexey Shabalin in libosinfo context,
current ALT Linux images tend to lack ISO9660 metadata
-- which they did have back in the day of Master 2.4.
Please note that the data collection occurs this way
due to mkimage's config.mk resetting the values to be
empty; this was worked around by using another config
file, $(BUILDDIR)lib/iso.mk, and including it later
but that would require a separate target with per-target
CONFIG variable which isn't elegant at all given the need
to actually build up the metadata set.
So the variables were changed (to be more readable anyways)
and then proxied back to BOOT_*. This might be cleaned up
some day after the inclusion order is tweaked or mkimage
defaults get set-if-unset-yet (?=).
Fixed up the remnants of the early style mix
to correspond to the proposed doc/style.txt;
the rationale being that
if [ ... ]; then
...
...
fi
is the more readable construct among itself,
if test ...; then
...
...
fi
and
[ ... ] && {
...
...
}
due to the condition being more distinguishable
when bracketed and the body more apparent as the
one inside "if" and not any other block; the less
obvious difference is that the final construct of
the latter form is prone to the whole script exit
status being non-zero if the condition isn't met.
- parameter order fixed to "simple first, then those with args"
and documented as the preferred one (might be debatable, okay)
- added "lowmem" to live so it avoids a ramdisk but works off media
(it's a knob for propagator)
- added "fastboot" everywhere (but failsafe install) to make use
of Linux 2.6.29+ async controller initialization
- every snippet got a trailing newline so that isolinux.cfg is readable
And a fancy makefile to check for shortcut dups!
As noted by imz@ in #26608, a LiveCD is the more preferred
boot target to a local drive usually (just as was discussed
and implemented for ALT Linux 4.0 IIRC).
It's now possible to:
- make distro/server-ovz.iso;
- make distro/server-ovz-netinst.iso;
- publish the former image's contents on ftp.linux.kiev.ua;
- boot the latter (~17M) image and enjoy the netinstall ;-)
The catch is that the stage2 (altinst file) location has to be
hardwired into syslinux config snippet for things to happen
automatically -- even if it can be specified manually in case
of failure.
The other catch is that currently a netinstall image is somewhat
tied to the particular image it installs since stage1 kernel and
stage2 modules must correspond strictly (the typical symptoms of
the glitch would be missing mouse driver and weird "permission
denied" errors during an attempt to partition the hard drives).
It might be desirable to provide multi-distro netinstall image...
The features might get copy-pasted (or even copied-and-pruned)
when initialized; there's an unneccessary duplication of the
function name in the line adding it to FEATURES list, thus
prone to being forgotten and causing some havoc later on.
It was wrong in the first place but tackling this with some
double-colon rules ran into terminality issues, and further
tortures were considered unneccessary.
The current solution isn't perfect (no completely transparent
function name registration upon corresponding target being called)
but at least it is an improvement...
- toplevel README received some long-needed refactoring
+ lowlevel detail moved, well, to lowlevel READMEs
- reflected more thoroughly that m-p is not about distros anymore
- dropped features.in/00example/README.en: it's already out-of-date
a bit, and there's no perceived need in thorough English docs so far
- wiki article got split into parts and somewhat rewritten, links updated
- mv doc/{CodingStyle,style.txt}
Back then I didn't come up with anything smarter than
"mkimage-profiles 2.0" (with my tongue in a cheek),
but as m-p has grown up to 0.4 it's time to fix this.
When done properly, all of the string should be brandable
(with some sane default value inheriting from image name),
but let's do it at least bit by bit.
The same change as in m-p-d f1c5dd0 (discussed in #22486).
Seems it wasn't the culprit regarding the "BIOS won't boot
off this DVD" but is also recommended in README.gfxboot.
This is quite a large-scale change since mkimage-profiles got used to
baking distributions over the last year, and virtual environments are
quite different, so e.g. image.in/Makefile had to be split in two with
the main part of it moved into features.in/iso/lib/.
Short overview:
- features.in/Makefile: lib/ support
(supporting VE images requires dynamic modifications
to image.in/Makefile before starting the build;
the most natural way to achieve that seems to use
features mechanism along with makefile include dir)
- packaging format related part moved into features.in/pack
(should be better prepared for diversity either)
- features.in/iso renamed to features.in/build-distro
- features.in/ve renamed to features.in/build-ve
+ NB: these could not be merged as e.g. features.in/build
due to completely different script hooks
- lib/image.mk renamed to lib/build.mk
- image, config, log postprocessing moved downstream
- added a sort of a topping in the form of lib/sugar.mk
- assorted style fixups (like ifeq usage)
- clean.mk: reliability fix (the problem was observed by Oleg Ivanov
and me too but finally it did get the attention quantum)
- reviewed, updated and extended docs
+ QUICKSTART: should be[come] a step-by-step guide
(thanks Leo-sp50 for prodiving feedback)
This was tackled before but it took raorn@'s hint regarding
sys-freedos-linux (ms-sys has no bootsectors compatible with
freedos currently) and gns@' quick rush at make-freedos-floppy
script to wrap things up.
Should be further developed to become actually useful though.
- introduced generic stage2 subprofile (non-standalone)
- ported installer and rescue over to stage2/{install2,rescue}
- initial stage2/live (needs more work for sure)
- use make-initrd-propagator
- updated and somewhat extended doc/
NB: mind #26133, #26134
...and switch syslinux.iso over to it: syslinux-3.86-alt4's
(actually opensuse's) gfxboot hackery doesn't properly init
video mode so memdisk-started freedos has console troubles
(and yesterday's hdt.c32 hassles could be avoided as well
it seems). And that's being implemented.
Mid-term plan: try switching to syslinux4.
PS: CLI fallback was actually a bug in hdt from syslinux <= 3.86-alt3
Renamed server-light.iso into server-ovz.iso to avoid brand dilution
and confusion (rider@'s server-light rather favours kvm, anyways).
Introduced KDEFAULT: a reliable default kernel chooser knob
since apt's regex ordering proved pretty unreliable.
Spelling things explicitly is better anyways.
SYSLINUX related features undergone pretty major rewrite
(that includes syslinux, hdt and memtest).
The problem to tackle was features.in/syslinux/generate.mk
assuming syslinux and pciids available in build *host* system;
this well might not be the case (or worse yet, those can be
just different). So now we're a bit less elegant and a bit
more enterprise, stuffing things into chroot and working there.
Bunch of other fixes along the road, including ; to name a few:
- fixed memtest entry (overlooked while renaming SYSLINUX_ITEMS)
- new and shiny doc/CodingStyle
- gfxboot, stage1 target chain, hdt tweaks
- distro.mk rehashed
- README++
- TODO: dropped (integer overflow anyways)
+ actually moved off-tree to reduce commit spam
- s,\.config\.mk,distcfg.mk,g
- doc/profiles.mk.sample: sample ~/.mkimage/profiles.mk
- ...and assorted fixups/additions
Sorry for convoluted commit, this would have been pretty hard to
rework into some really readable shape (and you might be interested
in the original repo's history horrors then, anyways).
Now we don't dump all the gory details onto thee
but rather log them handsomely and present only
the most important details by default; use DEBUG=1
and/or BUILDLOG=/path/to/file to tweak.
Also introduced IMAGEDIR and IMAGENAME.
The rest:
- ovz-smp is no more
- base-l10n pkglist (suggested by Alexander Kuprin)
- clean.mk:
+ fixed an oversight: the test result erroneously applied
only to the first command of several ones that should be
run iff build/ is a symlink
+ drop implicit rules (it's no C code)
- Makefile: more reasonable iso names
- image.in/Makefile: .disk/date too
