IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
sem@ noted that it had to be dropped from xfce4-full metapackage
as this package is built on top of gstreamer 0.10 and the API it
uses was dropped from gstreamer 1.0 so it's gonna die some day;
upstream recommends xfce4-pulseaudio-plugin but it's not suitable
to some of us, like Speccyfighter; well let's add the good ol'
plugin to sysv based flavour for now and see how it holds.
Shame on me, gnustep mixin is only used in gnustep flavour
while wmaker one is used in both gnustep and wmaker flavours.
So the default serif fonts in regular-wmaker.iso were still ugly.
I don't know of [k]powersave interactions with systemd
and the rest of that ilk, let's be cautious and only provide
it for sysv-tde images which have been actually tested
by Speccyfighter who asked for this package.
Can't tell for sure but something seems to break
suspend menu option (hibernate isn't supported in
all of the regular builds/starterkits just yet).
This refactoring is aimed at both providing reasonable
alterator package set in server-ovz (and server-hyperv)
while purging the install-time modules from plain server
as these were useless without a frontend package like
the web-based alterator-fbi.
It used to run NM without any kind of applet which is
not exactly usable unless it's DHCP over Ethernet there;
provide connman and qconnman-ui (applets on the road).
This has been proposed for server-hyperv by lewellyn@freenode
last summer, looks like a reasonable default for all of the
server images as those interersted in bridge setup are going
to do a few more things anyways.
This image has been cleaned up somewhat thoroughly
regarding its installed package base but partitioning
has remained poorly generic with swap etc; it's now
been set to use 3/4 Gb as a minimum (to fit 1Gb VMs
or USB sticks just fine) with the only partition
created being root one; those wishing something else
are welcome to go ahead and partition by hand anyways.
See also https://bugzilla.altlinux.org/30024
propagator-20150306-alt1 and make-initrd-propagator-0.25-alt1
have made it actually possible to use resulting LiveCD images
along with USB flash media to achieve data persistence that's
been long available for BIOS boot mode (see also #28289).
This isn't perfect but let's try flipping the switch:
all desktop regular builds are now "live_rw" by default
in EFI mode.
This requires mkimage >= 0.2.17.
This image doesn't deign to waste one's time by presenting
them with a bootloader menu and a few other things;
make it even less verbose where not neccessary.
xpra.org and winswitch.org are wonderful applications
helping one working with X11 apps all over the place,
running those on local and remote desktops and servers
with persistent sessions.
These aren't exactly trivial to plan and use but icewm
isn't for newbies either; thus these seem like nice match
for an "X11 thin client" image.
Size addition is ca. 50 Mb as of today which is a lot
but worth it.
This project has evolved/merged into LXQt which has been
packaged for both p7/t7 and sisyphus by now, no need to
carry on deprecated bits.
NB: 0.6.x still have it as t6/p6 still bear razorqt.
The issue at hand is that some sneaky stage3 alterator modules
seem to have tossed alterator-browser-qt (thus libqt4* and friends)
into base server installations; while this must be solved in within
package base and should be worked around by server feature probably
let's start out with leaf targets.
epiphany (or fontconfig?) insists on URW fonts for rendering
webpages like http://opennet.ru which hurts my eyes; looks like
/etc/fonts/conf.d/60-alt-post-user.conf would override these
with e.g. Liberation or Dejavu (with the latter being inferior
to the former, IMHO).
...so that regular builds really have common ground again,
which is something that got broken with regular-jeos introduction;
adjusted jeos and builder flavours to make use of this.
There's considerable confusion accumulated over the
expansion of regular builds with non-GUI targets:
- bare meant quite a lot including wireless;
- base meant GUI base actually,
so rescue, server, and especially jeos images had to
either cope with the bloat or start from scratch.
Let's fix "base" first...
Looks like QEMU 2.2.0 gets surprised with some kernel module
that udev tries to load during "Populating /dev:" boot stage;
dropping *both* +vmguest and +wireless dependencies does help
while switching to un-def kernel flavour doesn't (as is or with
any single one of these two deps removed).
Thanks user who reported the problem at opennet.ru
(alias "myhand").
altlinux-p7-kde4-20141212 images had a problem:
- the generic starterkit profile is tuned
for modest disk space consumption;
- KDE4 is quite extensive;
- kde4-regular subpackage tosses in most of KDE4 SC
...thus the livecd wouldn't autopartition enough
space for root filesystem when being installed.
volumes-profile-lite specifies 10Gb rootfs currently
which is just fine (-kdesktop one starts with 30Gb),
let's use it until vm-profile management is imported
into mkimage-profiles or things are redone completely.
There's no more livecd-gnome3-nosetup, it's been renamed
to setup-gnome3-done with no P:/O: to reduce repo spam.
Should have cherry-picked this into master back then :-/
There's GNOME 3.8 in p7/branch and it has no initial setup tool
thus no disabler is needed anyways; I've fixed this a while ago
but seem to have managed to lose the commit somehow :-/
So ALT Linux has got decent build tools but no one even knows
about those, right? And starting to use those is somewhat tedious
as it requires ALT installation with a specially crafted user account?
live-builder.iso has been useful enough to consider including its
relative into starterkits skipping regular builds for roughly the
same reasons as those for installers: we're better off helping users
to get onto the stable platform bandwagon than having them excited
with Sisyphus just to hit some wall down the road (even if we warn
of these walls well in advance most of the time), and while packages
tend to get into branches via sisyphus repo it's still better to stay
on the safe side with what we make easily available.
This has been asked for by lewellyn@freenode, why not.
NB: distro/.regular-sysv doesn't include use/net-eth/dhcp
(as it looks like asking for) since there's still hope
to get NM cooperating with sysvinit again.
Both locale and keyboard have been set up already,
no use to waste time on those (which results in 'us'
keyboard layout missing out totally, ironically).
Thanks aris@ for the tip.
This aims to work around URW fonts deficiencies combined
with the relatively high position of their standard ones
in default /etc/fonts/conf.avail/60-alt-post-user.conf;
see also #30293, #30294.
It's not EFI-bootable due to the extra size penalty
with current build/boot technology, but it's also
not ISO-hybrid as most images are made hybrid by
making them EFI-capable as well since the processes
are related.
Thanks dango at the forum for asking:
http://forum.altlinux.org/index.php/topic,33094.msg236808.html#msg236808
The bare intermediate target did use/stage2/net-eth but it
was found out by sem@ that an installed server would lack
udev-rule-generator-net package so its ethernet interface
naming would be inherited from install2 stage only; fix it
by adding use/net-eth and reduce the churn with +net-eth.
Thanks mithraen@ for creating a universal frontend script
for udisksctl/pmount/hmount user mount tools; let's try it
within the minimalistic GUI image for the starters.
systemd-214 has major problems with starting these services,
and KDC should definitely not even try to start up before
setup (which is not feasible given that these are LiveCDs).
domain-client pkglist inhabitants and net-usershares feature
are nasty enough to bring a lot of extra garbage in unfortunately
(alterator-auth, alterator-kdc, alterator-net-shares involved).
Commit 78f2158 left those images which required NM but not
its applet explicitly broken (as in "no applet at all");
this should probably be redone alike to browser feature
but let's provide a 20140612 band-aid at least.
I thought about this again and came to conclusion that bringing
alteratord and ahttpd up or down should rather be done at the same
time as backends and frontend are useless without each other
(at least for your average sysadmin).
Matt Lewandowsky suggested that alteratord be enabled
but ahttpd be disabled so as to avoid extra port being
listened to out-of-box but to be able to turn web GUI on
when needed.
Suggested by frbrgeorge@ and sounds quite reasonable
given that live-rescue.iso is very immature yet and
there are only a few -- but compelling -- reasons
to provide a graphical rescue image, gparted being
one of them for sure.
The logic is pretty much the same as with live.mk,
even somewhat extended as this has actually been
the driver of this change: some images like icewm
or lxqt-based ones might show off other browsers
explicitly (in addition to zerg@'s request).
This should better lurk here unless someone (including myself)
either forgets or doesn't realize the inobvious chain of the
assumptions made for the read-only warranty to actually work.
This is actually downplaying: the net effect is that
a few images continue to carry krb5-ticket-watcher
and have avahi service enabled by default while most
of the images have one "weird" item less on their menus
and a few hundred kilobytes less in total RSS.
These are not really needed by default in lightweight
distros sporting reduced application and services set,
and the heavier ones will take relatively less hit
by default while being more ready as ALT Domain clients
(which was the whole motivation behind adding the feature
and the corresponding pkglist).
A virtual machine lacking DHCP client seems much less useful,
and being able to shut one down via emulated ACPI button press
seems like no luxury either.
led-ws kernel flavour has gained kernel-modules-vmware
recently, let's add this to the appropriate targets.
It's used in regular-jeos already but THE_ part was missing.
This should provide the fix for #30024 (thanks ildar@):
vmware relies on mptspi.ko by default and that's been
split out into scsi and not guest subpackage for led-ws.
BTW use/install2/vmguest instead of a bunch.
plasma-applet-networkmanager has been superseded by a bunch
of kde4-plasma-nm* packages; only the main one has been included
in regular-kde4 flavour since the switch resulting in the lack of
VPN/mobile connectivity options.
My opinion still is that plasma-applet-networkmanager should be
returned as a metapackage for p7/branch timespan so that images
could be built no matter whether it's sisyphus or p7 at hand.
Oh well.
Package has been prepared by shaba@ and sem@,
and it looks like ALT Linux with un-def kernel
is one of the few (or just the one) distribution
running on Hyper-V Gen.2 rather flawlessly
thanks to efforts by boyarsh@ and vitty@.
Just a convenient knob for a few things done previously
to help spare the interesting bits from being overrun.
NB: live_rw isn't added although it might be useful
since that would yield too many boot targets overall;
this is likely to change some day, hopefully when
media type detection/handling is implemented.
Let's bump syslinux timeout to 20 seconds either
so that iKVM users have a chance to select anything
and not just see the default booting after a few
screen area size changes.
This reverts commit fd8f375573.
xdg-su is broken (some would say beyond repair) regarding DE
detection and handling of various GUI helper utilities,
especially in graceful fallback department; only a few images
can get imagewriter until this is fixed, let kde4 be the one.
The whole story with this installer has been due to a query
at #altlinux whether there's a distribution image similar
to altlinux-p7-rescue.iso which appears to be booting under
Hyper-V Gen. 2 without a hitch; changing just the kernel
towards the newer one made the user rather happy since
everything worked out-of-box for him, even unimportant bits.
Of course it's mostly due to boyarsh@'s preceding work :)
NB: there's no use to build i586 version as that hypervisor
lacks CSM (BIOS implementation) and would only boot UEFI
compatible operating systems with pretty strict requirements.
It has dawned on me that gdm2.20 is more widely useful
within sysvinit based builds: lightdm with gtk greeter
would fail to poweroff/reboot while this one would not.
aen@ asked to ship this one as well; no problem given mixins,
still being able to *switch* the init instead of regrafting
would be very beneficial.
NB:
- wdm can't do autologin;
- wdm can poweroff/halt;
- wdm+autologin won't work under systemd (via prefdm.service);
- nodm will work under systemd;
- nodm will ruin consolehelper -> livecd-install by root's PATH;
- gdm2.20 is lightweight, feature complete and sovereign enough.
The reason for an explicit cleanup is that VNC installation support
is now left in by default (see #29901); thus this commit is only
keeping the status quo for this image.
It's still a GUI installer but pretty much barebone one by now...
in particular, it needs no xorg-drv-$hardware being mostly targeted
at VMs and demo appliances where fbdev is rather enough.
Cleanup extra kernel drivers too.
Current Sisyphus' xorg-drv-intel works somewhat better
with recent kernel drivers on my HD4000 GPU, and icewm
is not compositing at all; providing another test/backup
image fitted with newer kernel should do no harm.
This package has been built and recommended by cas@;
it requires Qt5 which hasn't been needed for anything else
included in regular builds so far so let's extend kde4 one
to begin with.
lightdm isn't going to turn off the system properly
with no systemd-logind around ("for no good reason",
that is); good ol' wdm for installed system and the
similarly ol' autologin just work though.
nodm is not gonna cut it since user PATH is weird
within the session breaking livecd-install by putting
/usr/sbin before /usr/bin while it shouldn't be there
in the first place.
As it happens regular-rc testing has shown that cinnamon,
gnome3 and kde4 flavours included NM via their pkglists
and dependencies (which used to result in live feature
enabling NetworkManager service wholesale when found);
now when handling default services has become more strict
it became apparent that these images have got their LiveCD
mode running without network by default (installation does
set that up though).
It looks like an easy way to just stick +nm into .regular-desktop
dependencies but then razorqt, sugar, xmonad would get NM which
is not what they're gonna handle; e17/e18 too.
Well actually it shouldn't -- except for rEFInd the boot manager:
branding graphics within the build environment are used to add
a single background image to EFI/refind/icons/ thus the change.
Wonder how this got lost though as this screenshot:
http://en.altlinux.org/File:Altlinux-rescue-uefi-memtest86.jpg
clearly illustrates it was working back in December indeed!
TDE images are pretty modest regarding resource consumption
thus suitable for older hardware; a slower flash drive can
stall indefinitely showing slideshow and not going any further
with actual package installation so let's put a cap on that.
KVM and VirtualBox support packages are pretty tiny
but essential when these images get deployed within
virtual environments for any reason, let's add 'em.
It's been gfxboot-free but no user visible facility to select locale
has emerged through these years; it's been decided to put gfxboot
until some text chooser is available (thanks aen@ for discussion).
This is a minimalistic ALT-based system installer tailored
for those who know how to bring up networking and apt-get
the packages they actually need; thanks frbrgeorge@ for
proposing the specification as well as sem@ and glebfm@
for discussion.
No mc, no glibc-locales, even no man and interactivesystem!
Packages included: apt basesystem openssh vim-console
PS: Sisyphus-based regular build is not the main goal though
thus the p7/branch {bri,klu}dge.
