diff --git a/README.md b/README.md
index 0b4b38ac..50930733 100644
--- a/README.md
+++ b/README.md
@@ -8,90 +8,30 @@ moment, it is intended for use on build servers.
 Using rpm-ostree
 ----------------
 
-For example, this invocation:
+There are two levels; the core "rpm-ostree" command takes a set of
+packages and commits them to an OSTree repository.
 
-	rpm-ostree --repo=repo --enablerepo=fedora --os=fedora --os-version=20 create my-server-packages @standard kernel ostree fedora-release lvm2 e2fsprogs btrfs-progs httpd
-
-Will create a ref named "fedora/20/my-server-packages", containing a
-complete bootable root filesystem of those packages.  As you can see
-from the example above, the package set is fairly minimal, we're just
-adding on "httpd".
-
-Now, if you export the repo via any plain HTTP server, clients using
-OSTree can then replicate this tree, and boot it, tracking updates you
-make over time.
-
-Pulling and booting from a client machine
------------------------------------------
-
-First, install the ostree package, of course; make sure you have
-ostree 2013.7 or newer.
-
-	yum install ostree
-
-Now, this bit of one time initialization will both
-create `/ostree` for you, as well as `/ostree/deploy/fedora`.
-
-	ostree admin os-init fedora
-
-This step tells OSTree how to find the repository you built on
-the server.  You only need to do this once.
-
-	ostree remote add myserver https://mycorp.example.com/repo
-
-Now, since we did not GPG sign our repo above, we need to disable GPG
-verification.  Add `gpg-verify=false` in the `[remote]` section.
-
-	nano /ostree/repo/config
-
-This step downloads that ref into `/ostree/repo`:
-
-	ostree pull myserver fedora/20/my-server-packages
-
-This step extracts the root filesystem, and updates the bootloader
-configuration:
-
-	ostree admin deploy --os=fedora fedora/20/my-server-packages
-
-We need to do some initial setup before we actually boot the system.
-Copy in the storage configuration:
-
-	cp /etc/fstab /ostree/deploy/fedora/current
-
-And set a root password:
-
-	chroot /ostree/deploy/fedora/current passwd
-
-And there is one final (manual) step: You must copy your system's
-kernel arguments from `/boot/grub2/grub.cfg` and add them to
-`/boot/loader/entries/ostree-fedora-0.conf`, on the `options`
-line. This step may be automated further in the future.
-
-IMPORTANT NOTE: You must use selinux=0 for now.
-
-Booting the system
-------------------
-
-Remember, at this point there is no impact on your installed system
-except for additional disk space in the `/boot/loader` and `/ostree`
-directories.
-
-Reboot, and get a GRUB prompt.  At the prompt, press `c`.  Now, enter:
-
-	insmod blscfg
-	bls_import
-
-Then press `Esc`.  You should have an additional boot menu entry,
-named `ostree:fedora:0`.  Nagivate to it and press `Enter`.
+The higher level rpm-ostree-autobuilder parses a "products.json" which
+generates potentially many filesystem trees.  It also has code to
+generate disk images and run smoketests.
 
 
-Inside the system
------------------
+Setting up the autobuilder
+--------------------------
 
-To upgrade, run as root:
+There are packages available in the rpm-ostree COPR; you can also
+just "sudo make install" it.
 
-	ostree admin upgrade
+Once you have that done, choose a build directory.  Here we'll use
+/srv/rpm-ostree.
 
-Note that in our demo so far, we did not install `yum` (or even
-`rpm`).  Getting these to work fully is the next phase of the
-`yum-ostree` development.
+ # cd /srv/rpm-ostree
+ # mkdir repo
+ # ostree --repo=repo init --mode=archive-z2
+ # ln -s /path/to/rpm-ostree.git/fedostree/products.json .
+ # rpm-ostree-autobuilder autobuilder
+
+That will automatically poll every hour for changes in the RPMs
+referenced by the products.json file, commit them to the
+/srv/rpm-ostree/repo, and generate cached disk images in
+/srv/rpm-ostree/images.