IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
I originally thought there was a bug here, but missed we were skipping
symlinks earlier above. See [previous discussion][1].
Now, I'm not aware right now of something this patch actively fixes, but I think
it makes sense to be consistent in our handling of things here with respect to
symlinks.
1: 29dd1bd801..8158dcfb47 (r95017893)Closes: #689
Approved by: jlebon
Allow the `make vmcheck` target to take a HOSTS var, which is simply a
space-separated list of hosts on which we can run testsuites. Add a
multitest.py script that takes care of monitoring and scheduling the
tests onto the nodes.
The script itself is "dumb": we don't know how long each test can take,
so we can't do any smart/heuristic scheduling that could save more time.
Closes: #675
Approved by: cgwalters
1. Don't require an ssh-config
In the case of redhat-ci, the VMs are already fully configured for the
system (injected in the hosts file, host key accepted, etc...). So
there's no need to have an ssh-config there. In general, it should be
acceptable to run the vmcheck suite against a resolvable host without
having to create an ssh-config for it.
2. Make the host name configurable
Rather than hardcoding "vmcheck" as the hostname, allow overridding it
by specifying a VM env var directly. We also prepare the various scripts
to make use of the $VM variable whenever host-specific dirs/files are
created so that parallel runs won't step on each other.
Closes: #675
Approved by: cgwalters
Pull #646 introduced a subtle regression: we went from always including
a "packages" entry to only including it if there are packages present.
Albeit it's easy to guard against, though to be nice, let's make it
easier for consumers by always including it.
Reported-by: Micah Abbott <miabbott@redhat.com>
Closes: #670
Approved by: cgwalters
While reading a recent conversation about GPG checking at treecompose
time, I had a sudden thought - were we actually doing verification
client side? Turned out, we aren't. That happens as part of
`dnf_transaction_commit()` which we don't use.
That function verifies every package at one go, but for us I think it's better
to do it before "importing". We shouldn't have untrusted bits that we've
unpacked (they might have suid binaries, for one thing).
This is an embarassing problem, but it's worth emphasizing that everyone should
be retrieving repodata at a minimum over TLS, which sets a baseline. On RHEL, we
already do pinned TLS, and there are discussions about extending that elsewhere.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1422157Closes: #656
Approved by: jlebon
We don't want to expose the host's `/tmp` since that means scripts could
potentially find things like the X11 socket or whatever.
To debug things better, add a quick bash script to run bwrap like the C code
does. Perhaps down the line we can add `rpm-ostree internals run-bwrap` or so.
Closes: #647
Approved by: jlebon
Clean up the output of vmcheck a bit by printing out ssh debug details
and rpm-ostree status output to the log file. This will help make it
easier to quickly see which tests failed (as well as helping satisfy my
OCD for a nice output).
Closes: #645
Approved by: cgwalters
See https://github.com/projectatomic/rpm-ostree/issues/233 - for RPMs which
place files in e.g. `/opt`, we have different behavior in the treecompose case
(silently drop it) versus package layering (does the wrong thing).
Since the unpacker right now is only used in the layering case, this just
ensures we'll get a consistent error there.
Closes: #624
Approved by: jlebon
I'm not sure why we weren't doing this before, but we need to also
support files in /var and /run that are owned by root.
Related: RHBZ#1421781
Closes: #622
Approved by: cgwalters
We sometimes talk about using `ostree admin undeploy`, but that
doesn't know about the pkgcache, and hence space there leaks
until the next rpm-ostree operation.
Just for this, we need to expose a cleanup command (and API). But
we also need to support cleaning:
- repomd
- downloads (repo/tmp)
So let's start implementing that.
Closes: #614
Approved by: jlebon
Until now, we always used the booted deployment, and would
garbage collect the "pending" deployment. This is the
way OSTree was designed, but I think for rpm-ostree given
how mutable we are on the client side, there's a much stronger
argument for being more stateful too.
This is a relatively simple code change to split the "merge deployment"
concept into two. There's now the "config merge deployment" and the
"origin merge deployment".
Basically, `rpm-ostree install foo; rpm-ostree install bar` will
now install both `foo` and `bar`. But we will still use the booted
deployment for `/etc`.
Down the line, I think I'd like to drive into OSTree the concept of
a "staged" deployment, that has the hardlink checkout done, but doesn't
have the config merge.
But we don't need to change the OSTree core for this yet; we can
do it here in rpm-ostree, and this relatively simple code change
fixes many issues at once.
For example, `rpm-ostree upgrade && rpm-ostree install foo` now
does what you expect as well.
Obviously, we want to enable doing multiple things in *one* transaction,
and we're not far away, but I think this is also the right thing to do now.
I'm relatively confident it won't break anyone's workflow, as what
we did before wasn't generally that useful. However, people will
need to learn to `ostree admin undeploy 0` if they *don't* want
this behavior. (We need to have `rpm-ostree cleanup`).
Closes: https://github.com/projectatomic/rpm-ostree/issues/406Closes: #611
Approved by: jlebon
I'm watching https://github.com/rpm-software-management/libdnf/pull/199 and I
really don't like it. We already have a place to put out-of-rpmdb metadata,
which is in the ostree commit for imported packages. No need to involve a
relational database for this (and further, one that would need to learn about
multiple ostrees).
We're not yet *using* this information in the UI, but we could; imagine
changing the `status` `Packages:` to show packages-per-repo or so. We
could also expose an `rpm-ostree pkg-info foo`.
But for now, let's just start recording this.
Closes: #610
Approved by: jlebon
One thing that's very confusing about OSTree is there are two layers -
deployments and the refs/commits. If one does an `rpm-ostree upgrade`, but then
e.g. `ostree admin undeploy 0`, you still have the new revision in the repo.
We don't do a good job of displaying this state, or helping people clean
it up.
Down the line, I also want to better support something like `rpm-ostree pull` to
cache updates explicitly *without* deploying.
This commit just adds a bit of information to the status display. We might want
to have better formatting, but I think this an OK start.
Closes: #595
Approved by: jlebon
The actual problem I am trying to fix with this is fallout from the
introduction of `/usr/libexec/rpm-ostreed`, which required a SELinux
policy change. Specifically for CentOS, the base policy is rev'd
slowly.
My hope was that by merging the daemon code back into `/usr/bin/rpm-ostree`
which is labeled `install_exec_t`, starting via systemd would do
the right thing. It turns out that doesn't happen.
Now later, I'm picking this patch back up because I want to do multprocessing in
the daemon (and in the core), and it makes sense to share code between them,
because multiprocessing will need to go through a re-exec path.
Another benefit is we avoid duplicated text (libglnx, internal helpers) between
the two binaries.
Closes: #292
Approved by: jlebon
When we checked out the base tree for package layering, we would create
the directory in which ostree did the checkout. This meant however that
ostree wouldn't apply xattrs on the root directory itself. This would
cause the directory to be mislabeled (as system_conf_t instead of
root_t), which in turn cause SELinux violations on reboot when systemd
tried to make the root mount shared.
This patch fixes this by first settling on a permanent directory in
which to do checkouts -- really, we'll never have multiple package
layering operations going on at the same time. Once we know that we have
a reserved path, we can safely let ostree create it for us with the
proper xattrs.
Resolves: RHBZ#1318547
Closes: #605
Approved by: cgwalters
Currently we push for a model where the initramfs is
generated (in non-hostonly mode), and merely replicated.
However, to support a few unfortunate corner cases like dm-multipath which wants
to inject a config file into the initramfs, we need to support regenerating it
client side too.
Down the line, we'll need this to support overriding the kernel too.
This changes things in the core to add the concept of an "empty"
`RpmOstreeContext`. I initially tried skipping it, but that was too much
duplication. We still want all of the core ostree-related logic that lives in
that code too.
The treespec bits barfed if the spec didn't have a `tree/packages` key. It was
simplest to change that to allow it - and because that was the only case where
we errored out in parsing, I dropped the error handling.
There was another place in the upgrader that now needed to be fixed to handle
transitioning from just regenerating initramfs to not.
Closes: #574
Approved by: jlebon
I think since I landed a change to `--enable-new-name`, `/usr/bin/rpm-ostree`
became a symlink, and without the `-l` switch, rsync skips over them.
Hence, we have only been testing in vmcheck the old binaries, not new ones.
Oops.
Closes: #585
Approved by: jlebon
In the container build + vagrant test workflow, we have to run `make
vmsync` from the env in which autoconf was run, which is the container.
However, when using git worktrees (which is useful in this scenario to
avoid having to overwrite your local builds) and a CentOS build
container, the git inside is too old to understand worktrees, so let's
avoid invoking git in any of the test harness scripts.
Also make sure to restorecon after installing the new rpm-ostreed.
Closes: #555
Approved by: cgwalters
Add a few more tests to exercise some of the treefile options. We do
need to also expand test-basic.sh itself to sanity-check the structure
of a normal ostree compose. That's up next on the list.
Closes: #548
Approved by: cgwalters
This is just the final bit required to make sure the vagrant and
non-vagrant paths can work happily together. It's mostly minor fixes,
though the most major change which also affects vagrant is that we now
sync to the root home dir, rather than ~vagrant.
Closes: #524
Approved by: cgwalters
My development environment is now using "pet" docker containers.
I use VMs for testing things that require that (like rpm-ostree).
This patch builds on work from @jlebon in
https://github.com/projectatomic/rpm-ostree/pull/509
to rework `vmcheck` such that it can work on any `ssh-config`. By
default we expect this to be Vagrant.
However, I go a lot farther and delete the `vmbuild` code that was
trying to do builds in a container on the target VM. I think this is
still worth pursuing at some point, but for now I think it's
reasonable to assume that the rpm-ostree developer audience uses Linux
as their host workstation and hence has containers.
(There's another important point here in that for developing lower
level things like rpm-ostree, there's a strong push to make the VM
disposable and not a pet)
Closes: #516
Approved by: jlebon
Thought it'd be fun to write a test for verifying proper handling of
scriptlets during package layering. There's obviously a lot more that
could go in here (patches welcome!), but it's a start.
Closes: #434
Approved by: cgwalters
This is a useless test for now since we should be able to test on a VM
even if there are updates available.
I initially had it just as an example of the vmcheck test harness,
without actually thinking too much into what it was testing. But we do
need a nice test-basic.sh that will give rpm-ostree a good general
workout.
Closes: #394
Approved by: cgwalters
- Rename test-layering.sh to test-layering-basic.sh and make it test
both pkg-add and pkg-remove.
- Add test-layering-relayer.sh, which verifies that pkgs are properly
relayered during the creation of new deployments (e.g. upgrades,
rebases, deploys).
- Add test-layering-rpmdb.sh, which verifies that packages respect the
rpm requirements before being overlayed.
Closes: #371
Approved by: cgwalters
Print out a better summary that sums up the passes, failures, and skips.
Silence the restoring step at the end of the testsuite by only echo'ing
to the log file. Finally, add some colouring because colours are
awesome.
Closes: #371
Approved by: cgwalters
We now make the test harness handle restoring the VM to the original
state. The wonderful thing about ostree here is that it's a perfect
shoo-in for this. We make a 'backup' of the current ref, and just have
to make sure that the VM is back on that ref after running each test.
This will allow us to write tests without worrying as much about
cleaning up in the event of an error.
Closes: #360
Approved by: cgwalters
