IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Copy the bits from `overlay.sh` that takes the ostree files from the
build container so that we also get updated ostree bits when we
`vmsync`.
Also make sure to `daemon-reload` before restarting the daemon.
Closes: #803
Approved by: cgwalters
This was a kind of last-minute bug introduced when I tweaked the
checkout to use `.` to avoid a `mkdir()` for files. But there were
multiple bugs with that; for files that are in subdirectories of `/etc`
we obviously need to get the right subdir and not use `/etc`.
Second, we need to handle the case where we're adding new subdirectories.
This change fixes `rpm-ostree install firewalld + rpm-ostree ex livefs`.
Closes: #783
Approved by: jlebon
This is a valid case when layering local RPMs. Otherwise (e.g. if
specific non-local packages are requested), give the nicer error rather
than letting libdnf throw something less useful.
Closes: #780Closes: #781
Approved by: cgwalters
There are a few different use cases here. First, for layering new packages,
there's no good reason for us to force a reboot. Second, we want some support
for cherry-picking security updates and allowing admins to restart services. Finally,
at some point we should offer support for entirely replacing the running tree
if that's what the user wants.
Until now we've been very conservative, but there's a spectrum here. In
particular, this patch changes things so we push a rollback before we start
doing anything live. I think in practice, many use cases would be totally fine
with doing most changes live, and falling back to the rollback if something went
wrong.
This initial code drop *only* supports live layering of new packages. However,
a lot of the base infrastructure is laid for future work.
For now, this will be classified as an experimental feature, hence `ex livefs`.
Part of: https://github.com/projectatomic/rpm-ostree/issues/639Closes: #652
Approved by: jlebon
Now that rpm-ostree operations are cumulative, we need to make sure we
also clean up pending deployments. Also clean up the rollback for
consistency.
We also strengthen our ref handling. Always nuke the vmcheck ref (which
might not even exist anymore if a test rebased without --skip-purge) and
recreate it from the original ref.
Closes: #769
Approved by: cgwalters
Conceptually: we're going to move rpm-ostree and ostree at the same
cadence most of the time; for both releases *and* for git master.
The problem so far has been the latter part. Reusing FAHC
for the build gets us half of the problem.
The other trick I realized we can do - just pull ostree out from the build
container. This avoids fetching it from the internet, and makes my workflow for
hacking on both nicer - I just `sudo make install` in my build container for
ostree.
It's tempting to make the whole thing symmetric and require `sudo make install`
for rpm-ostree and not do the insttree thing but...perhaps after.
Closes: #758
Approved by: jlebon
This is preparatory for future changes which will make use the newer sysroot
writing API. But in this change, we can drop all of our version ifdef'd code.
Closes: #740
Approved by: jlebon
I want to be able to debug a test by sshing in with the same setup;
right now the suite resets and reboots by default.
This also required fixing how we deal with `/etc/yum.repos.d`, since at the
start of the test it could be either pristine or not.
Closes: #578
Approved by: jlebon
I need to build ostree from git too. So now my workflow is:
```
export insttree=/srv/walters/tmp/rootfs
cd ostree
make && make install DESTDIR=${insttree}
cd rpm-ostree
make && make install DESTDIR=${insttree}
env VMCHECK_INSTTREE=${insttree} make vmoverlay
```
Closes: #705
Approved by: jlebon
I originally thought there was a bug here, but missed we were skipping
symlinks earlier above. See [previous discussion][1].
Now, I'm not aware right now of something this patch actively fixes, but I think
it makes sense to be consistent in our handling of things here with respect to
symlinks.
1: 29dd1bd801..8158dcfb47 (r95017893)Closes: #689
Approved by: jlebon
Allow the `make vmcheck` target to take a HOSTS var, which is simply a
space-separated list of hosts on which we can run testsuites. Add a
multitest.py script that takes care of monitoring and scheduling the
tests onto the nodes.
The script itself is "dumb": we don't know how long each test can take,
so we can't do any smart/heuristic scheduling that could save more time.
Closes: #675
Approved by: cgwalters
1. Don't require an ssh-config
In the case of redhat-ci, the VMs are already fully configured for the
system (injected in the hosts file, host key accepted, etc...). So
there's no need to have an ssh-config there. In general, it should be
acceptable to run the vmcheck suite against a resolvable host without
having to create an ssh-config for it.
2. Make the host name configurable
Rather than hardcoding "vmcheck" as the hostname, allow overridding it
by specifying a VM env var directly. We also prepare the various scripts
to make use of the $VM variable whenever host-specific dirs/files are
created so that parallel runs won't step on each other.
Closes: #675
Approved by: cgwalters
Pull #646 introduced a subtle regression: we went from always including
a "packages" entry to only including it if there are packages present.
Albeit it's easy to guard against, though to be nice, let's make it
easier for consumers by always including it.
Reported-by: Micah Abbott <miabbott@redhat.com>
Closes: #670
Approved by: cgwalters
While reading a recent conversation about GPG checking at treecompose
time, I had a sudden thought - were we actually doing verification
client side? Turned out, we aren't. That happens as part of
`dnf_transaction_commit()` which we don't use.
That function verifies every package at one go, but for us I think it's better
to do it before "importing". We shouldn't have untrusted bits that we've
unpacked (they might have suid binaries, for one thing).
This is an embarassing problem, but it's worth emphasizing that everyone should
be retrieving repodata at a minimum over TLS, which sets a baseline. On RHEL, we
already do pinned TLS, and there are discussions about extending that elsewhere.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1422157Closes: #656
Approved by: jlebon
We don't want to expose the host's `/tmp` since that means scripts could
potentially find things like the X11 socket or whatever.
To debug things better, add a quick bash script to run bwrap like the C code
does. Perhaps down the line we can add `rpm-ostree internals run-bwrap` or so.
Closes: #647
Approved by: jlebon
Clean up the output of vmcheck a bit by printing out ssh debug details
and rpm-ostree status output to the log file. This will help make it
easier to quickly see which tests failed (as well as helping satisfy my
OCD for a nice output).
Closes: #645
Approved by: cgwalters
See https://github.com/projectatomic/rpm-ostree/issues/233 - for RPMs which
place files in e.g. `/opt`, we have different behavior in the treecompose case
(silently drop it) versus package layering (does the wrong thing).
Since the unpacker right now is only used in the layering case, this just
ensures we'll get a consistent error there.
Closes: #624
Approved by: jlebon
I'm not sure why we weren't doing this before, but we need to also
support files in /var and /run that are owned by root.
Related: RHBZ#1421781
Closes: #622
Approved by: cgwalters
We sometimes talk about using `ostree admin undeploy`, but that
doesn't know about the pkgcache, and hence space there leaks
until the next rpm-ostree operation.
Just for this, we need to expose a cleanup command (and API). But
we also need to support cleaning:
- repomd
- downloads (repo/tmp)
So let's start implementing that.
Closes: #614
Approved by: jlebon
Until now, we always used the booted deployment, and would
garbage collect the "pending" deployment. This is the
way OSTree was designed, but I think for rpm-ostree given
how mutable we are on the client side, there's a much stronger
argument for being more stateful too.
This is a relatively simple code change to split the "merge deployment"
concept into two. There's now the "config merge deployment" and the
"origin merge deployment".
Basically, `rpm-ostree install foo; rpm-ostree install bar` will
now install both `foo` and `bar`. But we will still use the booted
deployment for `/etc`.
Down the line, I think I'd like to drive into OSTree the concept of
a "staged" deployment, that has the hardlink checkout done, but doesn't
have the config merge.
But we don't need to change the OSTree core for this yet; we can
do it here in rpm-ostree, and this relatively simple code change
fixes many issues at once.
For example, `rpm-ostree upgrade && rpm-ostree install foo` now
does what you expect as well.
Obviously, we want to enable doing multiple things in *one* transaction,
and we're not far away, but I think this is also the right thing to do now.
I'm relatively confident it won't break anyone's workflow, as what
we did before wasn't generally that useful. However, people will
need to learn to `ostree admin undeploy 0` if they *don't* want
this behavior. (We need to have `rpm-ostree cleanup`).
Closes: https://github.com/projectatomic/rpm-ostree/issues/406Closes: #611
Approved by: jlebon
I'm watching https://github.com/rpm-software-management/libdnf/pull/199 and I
really don't like it. We already have a place to put out-of-rpmdb metadata,
which is in the ostree commit for imported packages. No need to involve a
relational database for this (and further, one that would need to learn about
multiple ostrees).
We're not yet *using* this information in the UI, but we could; imagine
changing the `status` `Packages:` to show packages-per-repo or so. We
could also expose an `rpm-ostree pkg-info foo`.
But for now, let's just start recording this.
Closes: #610
Approved by: jlebon
One thing that's very confusing about OSTree is there are two layers -
deployments and the refs/commits. If one does an `rpm-ostree upgrade`, but then
e.g. `ostree admin undeploy 0`, you still have the new revision in the repo.
We don't do a good job of displaying this state, or helping people clean
it up.
Down the line, I also want to better support something like `rpm-ostree pull` to
cache updates explicitly *without* deploying.
This commit just adds a bit of information to the status display. We might want
to have better formatting, but I think this an OK start.
Closes: #595
Approved by: jlebon
The actual problem I am trying to fix with this is fallout from the
introduction of `/usr/libexec/rpm-ostreed`, which required a SELinux
policy change. Specifically for CentOS, the base policy is rev'd
slowly.
My hope was that by merging the daemon code back into `/usr/bin/rpm-ostree`
which is labeled `install_exec_t`, starting via systemd would do
the right thing. It turns out that doesn't happen.
Now later, I'm picking this patch back up because I want to do multprocessing in
the daemon (and in the core), and it makes sense to share code between them,
because multiprocessing will need to go through a re-exec path.
Another benefit is we avoid duplicated text (libglnx, internal helpers) between
the two binaries.
Closes: #292
Approved by: jlebon
When we checked out the base tree for package layering, we would create
the directory in which ostree did the checkout. This meant however that
ostree wouldn't apply xattrs on the root directory itself. This would
cause the directory to be mislabeled (as system_conf_t instead of
root_t), which in turn cause SELinux violations on reboot when systemd
tried to make the root mount shared.
This patch fixes this by first settling on a permanent directory in
which to do checkouts -- really, we'll never have multiple package
layering operations going on at the same time. Once we know that we have
a reserved path, we can safely let ostree create it for us with the
proper xattrs.
Resolves: RHBZ#1318547
Closes: #605
Approved by: cgwalters
Currently we push for a model where the initramfs is
generated (in non-hostonly mode), and merely replicated.
However, to support a few unfortunate corner cases like dm-multipath which wants
to inject a config file into the initramfs, we need to support regenerating it
client side too.
Down the line, we'll need this to support overriding the kernel too.
This changes things in the core to add the concept of an "empty"
`RpmOstreeContext`. I initially tried skipping it, but that was too much
duplication. We still want all of the core ostree-related logic that lives in
that code too.
The treespec bits barfed if the spec didn't have a `tree/packages` key. It was
simplest to change that to allow it - and because that was the only case where
we errored out in parsing, I dropped the error handling.
There was another place in the upgrader that now needed to be fixed to handle
transitioning from just regenerating initramfs to not.
Closes: #574
Approved by: jlebon
I think since I landed a change to `--enable-new-name`, `/usr/bin/rpm-ostree`
became a symlink, and without the `-l` switch, rsync skips over them.
Hence, we have only been testing in vmcheck the old binaries, not new ones.
Oops.
Closes: #585
Approved by: jlebon
In the container build + vagrant test workflow, we have to run `make
vmsync` from the env in which autoconf was run, which is the container.
However, when using git worktrees (which is useful in this scenario to
avoid having to overwrite your local builds) and a CentOS build
container, the git inside is too old to understand worktrees, so let's
avoid invoking git in any of the test harness scripts.
Also make sure to restorecon after installing the new rpm-ostreed.
Closes: #555
Approved by: cgwalters
Add a few more tests to exercise some of the treefile options. We do
need to also expand test-basic.sh itself to sanity-check the structure
of a normal ostree compose. That's up next on the list.
Closes: #548
Approved by: cgwalters
This is just the final bit required to make sure the vagrant and
non-vagrant paths can work happily together. It's mostly minor fixes,
though the most major change which also affects vagrant is that we now
sync to the root home dir, rather than ~vagrant.
Closes: #524
Approved by: cgwalters
My development environment is now using "pet" docker containers.
I use VMs for testing things that require that (like rpm-ostree).
This patch builds on work from @jlebon in
https://github.com/projectatomic/rpm-ostree/pull/509
to rework `vmcheck` such that it can work on any `ssh-config`. By
default we expect this to be Vagrant.
However, I go a lot farther and delete the `vmbuild` code that was
trying to do builds in a container on the target VM. I think this is
still worth pursuing at some point, but for now I think it's
reasonable to assume that the rpm-ostree developer audience uses Linux
as their host workstation and hence has containers.
(There's another important point here in that for developing lower
level things like rpm-ostree, there's a strong push to make the VM
disposable and not a pet)
Closes: #516
Approved by: jlebon
Thought it'd be fun to write a test for verifying proper handling of
scriptlets during package layering. There's obviously a lot more that
could go in here (patches welcome!), but it's a start.
Closes: #434
Approved by: cgwalters
This is a useless test for now since we should be able to test on a VM
even if there are updates available.
I initially had it just as an example of the vmcheck test harness,
without actually thinking too much into what it was testing. But we do
need a nice test-basic.sh that will give rpm-ostree a good general
workout.
Closes: #394
Approved by: cgwalters
- Rename test-layering.sh to test-layering-basic.sh and make it test
both pkg-add and pkg-remove.
- Add test-layering-relayer.sh, which verifies that pkgs are properly
relayered during the creation of new deployments (e.g. upgrades,
rebases, deploys).
- Add test-layering-rpmdb.sh, which verifies that packages respect the
rpm requirements before being overlayed.
Closes: #371
Approved by: cgwalters
Print out a better summary that sums up the passes, failures, and skips.
Silence the restoring step at the end of the testsuite by only echo'ing
to the log file. Finally, add some colouring because colours are
awesome.
Closes: #371
Approved by: cgwalters
We now make the test harness handle restoring the VM to the original
state. The wonderful thing about ostree here is that it's a perfect
shoo-in for this. We make a 'backup' of the current ref, and just have
to make sure that the VM is back on that ref after running each test.
This will allow us to write tests without worrying as much about
cleaning up in the event of an error.
Closes: #360
Approved by: cgwalters
This is a preliminary package layering test which simply installs the
foo package and verifies that it functions properly. A bunch of
primitives are added to libvm.sh to facilitate this and future tests.
Closes: #344
Approved by: cgwalters
This is a very simple test harness inspired by the atomic one. It's a
simple bash script that sets up a permanent ssh connection to the host
and runs the test scripts. Also add a "demo" test-basic.sh test to make
sure that it works.
Closes: #344
Approved by: cgwalters
If the dir that was rsync'ed already contains build artifacts, we don't
want those contaminating our build process.
Closes: #336
Approved by: cgwalters
The `make vmshell` target makes it even easier to immediately try out
your changes in a live running Atomic Host. It will automatically
provision the VM, sync your latest changes, build, install in a new
deployment onto which the VM is rebooted, and drop you in the shell.
Closes: #321
Approved by: cgwalters
In order for vmcheck to be useful for testing, we need the machine to be
in a "clean" state. That is, sitting on a commit, ready for being
manipulated.
This is a small step towards this goal. Instead of overwriting the
files, we use rofiles-fuse to safely install and create a new
deployment.
Closes: #321
Approved by: cgwalters
I find myself not liking the name rpm-ostree anymore; it's
descriptive, but unfortunately we compete with other projects with
easier and sexier names.
Also, people continually find the ostree and rpm-ostree layering
unclear. It's *much* easier to say "nxs depends on ostree", even
though textually it's obvious "rpm-ostree depends on ostree".
Anyways, just an experiment for now.
Closes: #307
Approved by: giuseppe
This is infrastructure that's oriented around Vagrant, we do builds
inside the target VM (actually inside a Docker container), but then
directly `make install DESTDIR=/host/`.
The goal here is to have a convenient workflow for:
- dev -> hand testing
- dev -> run destructive tests
Closes: #303
Approved by: jlebon
