IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Thought it'd be fun to write a test for verifying proper handling of
scriptlets during package layering. There's obviously a lot more that
could go in here (patches welcome!), but it's a start.
Closes: #434
Approved by: cgwalters
This is a useless test for now since we should be able to test on a VM
even if there are updates available.
I initially had it just as an example of the vmcheck test harness,
without actually thinking too much into what it was testing. But we do
need a nice test-basic.sh that will give rpm-ostree a good general
workout.
Closes: #394
Approved by: cgwalters
We don't have a lot of outstanding changes to the C code, so now seems
like a good time to do this. I implemented this with some highly
sophisticated sed commands like:
```
find -name '*.c' | while read name; do sed -i -e 's,gs_unref_object \([A-Za-z]*\) \*,g_autoptr(\1),' ${name}; done
```
Part of dropping the dependency on libgsystem, same as what we're
doing in ostree.
Closes: #393
Approved by: jlebon
- Rename test-layering.sh to test-layering-basic.sh and make it test
both pkg-add and pkg-remove.
- Add test-layering-relayer.sh, which verifies that pkgs are properly
relayered during the creation of new deployments (e.g. upgrades,
rebases, deploys).
- Add test-layering-rpmdb.sh, which verifies that packages respect the
rpm requirements before being overlayed.
Closes: #371
Approved by: cgwalters
Print out a better summary that sums up the passes, failures, and skips.
Silence the restoring step at the end of the testsuite by only echo'ing
to the log file. Finally, add some colouring because colours are
awesome.
Closes: #371
Approved by: cgwalters
The test-basic.sh test was failing on machines that had jq installed.
Will have to make sure to add it to the PR tester.
Closes: #360
Approved by: cgwalters
We now make the test harness handle restoring the VM to the original
state. The wonderful thing about ostree here is that it's a perfect
shoo-in for this. We make a 'backup' of the current ref, and just have
to make sure that the VM is back on that ref after running each test.
This will allow us to write tests without worrying as much about
cleaning up in the event of an error.
Closes: #360
Approved by: cgwalters
This is a preliminary package layering test which simply installs the
foo package and verifies that it functions properly. A bunch of
primitives are added to libvm.sh to facilitate this and future tests.
Closes: #344
Approved by: cgwalters
We're going to be create many different packages in the future. Let's
refactor and generalize the targets so that they can build anything.
We also add a package foo, which will be used soon for a basic test of
package layering.
Closes: #344
Approved by: cgwalters
This is a very simple test harness inspired by the atomic one. It's a
simple bash script that sets up a permanent ssh connection to the host
and runs the test scripts. Also add a "demo" test-basic.sh test to make
sure that it works.
Closes: #344
Approved by: cgwalters
If the dir that was rsync'ed already contains build artifacts, we don't
want those contaminating our build process.
Closes: #336
Approved by: cgwalters
I really want a command to cancel the running transaction, but as a
preparatory step, let's display what's going on in `status`.
The text output here is really a demonstration - I'll improve it but I
want to rework the internals first.
Closes: #320
Approved by: jlebon
According to tmpfiles.d(5), files should follow the convention
<package>.conf or <package>-<part>.conf. So we rename
tmpfiles-ostree-integration.conf to rpm-ostree-0-integration.conf.
The 0 index is so that the autovar conf created by postprocess is
sourced *after* this one, so that `integration.conf` has higher
precedence if there are duplicate entries.
Closes: #325
Approved by: cgwalters
The `make vmshell` target makes it even easier to immediately try out
your changes in a live running Atomic Host. It will automatically
provision the VM, sync your latest changes, build, install in a new
deployment onto which the VM is rebooted, and drop you in the shell.
Closes: #321
Approved by: cgwalters
In order for vmcheck to be useful for testing, we need the machine to be
in a "clean" state. That is, sitting on a commit, ready for being
manipulated.
This is a small step towards this goal. Instead of overwriting the
files, we use rofiles-fuse to safely install and create a new
deployment.
Closes: #321
Approved by: cgwalters
It's really simple to reflect the DBus API into JSON, which tools like
Ansible or `jq` from the command line or whatever can parse to find
interesting things like the current version.
Closes: #301Closes: #315
Approved by: jlebon
I find myself not liking the name rpm-ostree anymore; it's
descriptive, but unfortunately we compete with other projects with
easier and sexier names.
Also, people continually find the ostree and rpm-ostree layering
unclear. It's *much* easier to say "nxs depends on ostree", even
though textually it's obvious "rpm-ostree depends on ostree".
Anyways, just an experiment for now.
Closes: #307
Approved by: giuseppe
This is infrastructure that's oriented around Vagrant, we do builds
inside the target VM (actually inside a Docker container), but then
directly `make install DESTDIR=/host/`.
The goal here is to have a convenient workflow for:
- dev -> hand testing
- dev -> run destructive tests
Closes: #303
Approved by: jlebon
Since we now run everything uninstalled, we can't expect the tmpfiles
conf file to be installed. We add an env var that will allow us to tell
rpm-ostree to look elsewhere. This is then used in test-compose.sh.
Closes: #304
Approved by: cgwalters
- Move all the uninstalled, non-destructive tests to check/
- Add a README
- Move utilities to utils/
- Move common files to common/
Closes: #304
Approved by: cgwalters
For now, we don't remove the ability to install tests (e.g. the
necessary blurbs in glib-tap.mk are still there), but we take out all
our previously installed tests from the list.
All the previously installed tests are then converted to work
uninstalled. This also allows us to do some simplifications in the test
cases.
Also do some cleanups in the Makefile to improve legibility.
Closes: #304
Approved by: cgwalters
This works around a potential issue with libsolv if we go down the
rpmostree_get_pkglist_for_root() path. Though rpm has been using the
/usr/share/rpm location (since the RpmOstreeContext set the _dbpath
macro), the /var/lib/rpm directory will still exist, but be empty.
libsolv gets confused because it sees the /var/lib/rpm dir and doesn't
even try the /usr/share/rpm location, and eventually dies when it tries
to load the data.
So we set the symlink now. This is also what we do on boot anyway for
compatibility reasons using tmpfiles.
This also means we don't have to do the /var/lib/rpm --> /usr/share/rpm
transition during the rootfs postprocess (but we still have to clean up
db and lock files).
Also get rid of the unused pkglist variable.
NB: I used the GFile & gs APIs to mesh with the surrounding code.
Closes: #290
Approved by: cgwalters
This comes from the tradition of yum repo files. It's significantly
easier for rpm-ostree users building multiple architectures if some
core templating for the treefiles is built in.
Otherwise, everyone needs to learn about a new wrapper tool for
rpm-ostree, and said tool would need to re-do the same "basearch"
evaluation that is already occuring inside libhif.
This commit also paves the way for introducing `${releasever}`
substitution.
NOTE: This depends on pending changes to libhif git.
Closes: #274
Approved by: jlebon
If one does `rpm-ostree foo --bar`, one would expect to see
`Unknown subcommand foo`, not `Unknown option --bar`.
Closes: #267Closes: #270
Approved by: jlebon
awk is already used by the tap driver, so it won't be an additional
dependency.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #263
Approved by: cgwalters
I was tracking another regression where we seem to have lost
`/usr/etc` contents which manifested as `Labeling with... (null)`
which was clearly wrong.
Now this change actually impacts the test suite - we now (again IMO
correctly) error out if `selinux: true`. The `no-selinux-tag` test
no longer makes sense, so delete it.
We do need more "real" tests that use selinux on and off.
Pull request: #243
Approved by: jlebon
When running the tests by hand, I wanted to be able to source
`libtest.sh` from a running shell. Make this slightly easier by
allowing one to set `SRCDIR`, since `$0` won't work.
The libtest.sh script is aware of whether a tmpdir needs to be created
or not for the test. Make use of this in setup-session.sh so that we're
sure we're in the right directory before creating the sysroot dir.
Running `make check` would fail because test-ucontainer.sh uses
test-repo, which points directly to the installed_testdir, where it is
not installed yet.
We make another processed version of test-repo.repo.in which instead
points to the repo in the srcdir and make use of that in
test-ucontainer.sh.
There are probably other ways of solving this, but this is the one that
jumped out at me.
For the same reasons as described in GNOME/ostree#187. In summary: we
want to make it easy for testers to clean up after we're done by not
setting the immutable flag.
Note that I had to also add it to setup-session.sh so that the daemon
inherited the env var. The libtest.sh hunk is redundant in that case,
but still necessary if the tests are run directly.
The assert[_not]_file_has_content functions used grep to check the
pattern against the content. This meant that the '.' characters are
interpreted as "any char". Yesterday, the date was 20150910 and thus the
otheros' tree's version was labelled as such. This date also happens to
match the 1.0.10 pattern, and thus caused the test to fail.
This patch makes sure this doesn't happen again by escaping all the dots
to make them literal.
Unfortunately RHEL 7 has an older version of dbus, and I use it as a
workstation. It's not a lot of code and only used for tests. We can
make it build time conditional down the line or something.
This is a *third* implementation of rpm database diffs in the code,
but it is now a public introspectable shared library API.
Further commits will change the command line tools to use this, and
then after that we'll further deduplicate the `db diff` from this
code.
The `QueryResult` class ended up being too awkward; having NEVRA
strings meant for example that clients would have to parse them. It
would be harder to present something like the current `rpm-ostree
upgrade` package diff output.
Now...I debated quite a while before doing this patch. The thing
that's really awful about creating this library is there are *SO MANY*
layers. rpm-ostree → libhif → hawkey → libsolv → librpm. It's enough
to make one question whether one is actually accomplishing anything or
just contributing to a collective insanity...
Let's pretend for now it's the former.
Closes: https://github.com/projectatomic/rpm-ostree/pull/136
This will help build release engineering and other types of tools;
for example, rather than parsing the output of `db diff`, one
should be able to call an API.
Initially, this adds the generic infrastructure for a public shared
library, with a new function call to do the equivalent of `rpm -qa` on
a particular OSTree commit.
Closes: https://github.com/projectatomic/rpm-ostree/issues/117
Closes: https://github.com/projectatomic/rpm-ostree/pull/124
A local yum repository, which contains a dummy .rpm package adding
support for programs needed by the post-process phase, is created as
part of the test.
Since no libc is present, the empty.c program (which is a no-op)
directly invokes the interrupt 0x80 to exit.
The test works only on x86_64, it is skipped on other architectures.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
