IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
One thing that's very confusing about OSTree is there are two layers -
deployments and the refs/commits. If one does an `rpm-ostree upgrade`, but then
e.g. `ostree admin undeploy 0`, you still have the new revision in the repo.
We don't do a good job of displaying this state, or helping people clean
it up.
Down the line, I also want to better support something like `rpm-ostree pull` to
cache updates explicitly *without* deploying.
This commit just adds a bit of information to the status display. We might want
to have better formatting, but I think this an OK start.
Closes: #595
Approved by: jlebon
Currently we push for a model where the initramfs is
generated (in non-hostonly mode), and merely replicated.
However, to support a few unfortunate corner cases like dm-multipath which wants
to inject a config file into the initramfs, we need to support regenerating it
client side too.
Down the line, we'll need this to support overriding the kernel too.
This changes things in the core to add the concept of an "empty"
`RpmOstreeContext`. I initially tried skipping it, but that was too much
duplication. We still want all of the core ostree-related logic that lives in
that code too.
The treespec bits barfed if the spec didn't have a `tree/packages` key. It was
simplest to change that to allow it - and because that was the only case where
we errored out in parsing, I dropped the error handling.
There was another place in the upgrader that now needed to be fixed to handle
transitioning from just regenerating initramfs to not.
Closes: #574
Approved by: jlebon
Many projects do this, and it really helps debugging to know the
exact hash.
(Of course this is broken in traditional rpm builds from a tarball,
and rpmdistro-gitoverlay injects it into the Version field,
but it will help me for vmcheck debugging)
Closes: #584
Approved by: jlebon
I don't see a reason not to require more stuff to execute tests,
and having it be optional reduces our coverage unnecessarily.
Closes: #580
Approved by: jlebon
Working on initramfs, I hit a subtle issue with the fact that
I was trying to "redeploy", but with the origin file changed
during the process.
Previously, it was a bit unclear which parts of the upgrader logic are operating
on the *new* origin versus the "original origin".
The package layering code in the upgrader explicitly carries a delta on top in
the "add/remove" hash sets, which means it isn't visible to
`rpmostree_origin_is_locally_assembled()`.
Whereas for initramfs, I set a new origin. This broke things since we were
expecting to find a parent commit, but the original origin wasn't locally
assembled.
When looking more at this, I realized there's a far simpler model -
rather than keeping track of commit + origin, and using the origin
to try to determine whether or not the commit is layered, we can
keep track of `base_revision` and `final_revision`, and the latter
is only set if we're doing layering.
The diff speaks for itself here - a lot of fragile logic looking at the origin
drops away.
The next step here is probably to drop away the package layering hash sets, but
I'm trying to not change everything at once.
Closes: #579
Approved by: jlebon
We seem to have substantial infrastructure drift here between the two, and I was
*really* confused why `TEST_SKIP_CLEANUP` wasn't being honored. Turned out in
rpm-ostree we have tmpdir code in two places, not entirely sure why. Punting
full cleanup.
Closes: #566
Approved by: jlebon
First try to log in, and if we fail, retry with SSH debugging,
so we have a better idea what might be going wrong. This helped
me figure out that vmcheck's `-o User=root` assumption wasn't
working with my vagrant setup.
Closes: #560
Approved by: jlebon
During a deploy operation, we would fetch commit objects from the remote
to resolve the version string. If gpg-verify was turned on, we would
fail to pull them if some of the commits were not signed. This is
because we pulled them in batches. We partially address this by only
fetching the HEAD commit on the first pass. This allows `upgrade`
operations to work just as well as `deploy` operations.
Though there is still an issue if we have to traverse farther back than
when signed commits become unsigned (unless they happen to fall on a
batch boundary). We leave that unsolved for now, since that would likely
require a more complex solution and it's not clear whether it's a real
world issue (signers can just retroactively sign commits).
Copy the gpghome from ostree so that we can test GPG-related cases in
our suite.
Closes: #527Closes: #557
Approved by: cgwalters
Expand the available options in the Rebase() D-Bus method to also have a
"revision" key. Its value has the same semantics as the "revision" key
in the Deploy() method (e.g. the "revision=" and "version=" prefixes are
also supported). Also expand the rebase CLI to allow for specifying the
revision as an additional argument.
This allows users to rebase to a specific version or checksum, rather
than only to the latest. Conceptually, this is the equivalent of doing a
rebase followed by a deploy. I.e. we specify an override-commit in the
origin and expect the same behaviours that apply after a deploy to also
apply here.
Closes: #212Closes: #555
Approved by: cgwalters
Unsurprisingly, rebooting machines that are running in OpenStack is
not as reliable or as fast as a local VM, which is what vmcheck was
originally written for and tested against.
Replace the:
sleep 2 # give time for port to go down
which is rife with raciness, with a stronger boot_id-based check to
ensure we're in a new boot. Run "sync" before rebooting which sometimes
helps (though I didn't fully investigate why or whether it always helps,
there's probably something more subtle going on underneath). Increase
the timeout to 120s.
Closes: #543
Approved by: cgwalters
Our current compose tests only use a synthetic `empty.rpm`, but
this really limits usefulness.
Let's make a test suite that requires an internet connection and
downloads Fedora RPMs and does "real" tree composes.
See the updated `tests/README.md` for more information.
This is still a WIP.
Closes: #531
Approved by: jlebon
This is just the final bit required to make sure the vagrant and
non-vagrant paths can work happily together. It's mostly minor fixes,
though the most major change which also affects vagrant is that we now
sync to the root home dir, rather than ~vagrant.
Closes: #524
Approved by: cgwalters
My development environment is now using "pet" docker containers.
I use VMs for testing things that require that (like rpm-ostree).
This patch builds on work from @jlebon in
https://github.com/projectatomic/rpm-ostree/pull/509
to rework `vmcheck` such that it can work on any `ssh-config`. By
default we expect this to be Vagrant.
However, I go a lot farther and delete the `vmbuild` code that was
trying to do builds in a container on the target VM. I think this is
still worth pursuing at some point, but for now I think it's
reasonable to assume that the rpm-ostree developer audience uses Linux
as their host workstation and hence has containers.
(There's another important point here in that for developing lower
level things like rpm-ostree, there's a strong push to make the VM
disposable and not a pet)
Closes: #516
Approved by: jlebon
We further split libvm from vagrant. It no longer does 'vagrant
ssh-config'. Instead, it always assumes that an ssh-config is provided.
We now have complete separation of libvm from vagrant.
We change the ansible provisioner as follows:
- Allow passing in a VAGRANT_BOX env var to override the default
CentOS box.
- No longer assume that the root user account is unlocked and has a
valid 'vagrant' password. This worked for the centos box but isn't
sure to work on every box. Instead, we now just run ansible as the
default vagrant user, and during provisioning set up the root
account and generate an ssh-config so that libvm can connect
directly as root.
- No longer build the buildimg during provisioning. This actually
stopped working a while ago since the default rsync is disabled. We
can just let the buildimg get created on the first compilation. In
practice, the bigger issue isn't creating the buildimg, but being
able to easily update the host and buildimg pkgs.
Closes: #516
Approved by: jlebon
Thought it'd be fun to write a test for verifying proper handling of
scriptlets during package layering. There's obviously a lot more that
could go in here (patches welcome!), but it's a start.
Closes: #434
Approved by: cgwalters
- Rename test-layering.sh to test-layering-basic.sh and make it test
both pkg-add and pkg-remove.
- Add test-layering-relayer.sh, which verifies that pkgs are properly
relayered during the creation of new deployments (e.g. upgrades,
rebases, deploys).
- Add test-layering-rpmdb.sh, which verifies that packages respect the
rpm requirements before being overlayed.
Closes: #371
Approved by: cgwalters
We now make the test harness handle restoring the VM to the original
state. The wonderful thing about ostree here is that it's a perfect
shoo-in for this. We make a 'backup' of the current ref, and just have
to make sure that the VM is back on that ref after running each test.
This will allow us to write tests without worrying as much about
cleaning up in the event of an error.
Closes: #360
Approved by: cgwalters
This is a preliminary package layering test which simply installs the
foo package and verifies that it functions properly. A bunch of
primitives are added to libvm.sh to facilitate this and future tests.
Closes: #344
Approved by: cgwalters
We're going to be create many different packages in the future. Let's
refactor and generalize the targets so that they can build anything.
We also add a package foo, which will be used soon for a basic test of
package layering.
Closes: #344
Approved by: cgwalters
This is a very simple test harness inspired by the atomic one. It's a
simple bash script that sets up a permanent ssh connection to the host
and runs the test scripts. Also add a "demo" test-basic.sh test to make
sure that it works.
Closes: #344
Approved by: cgwalters
- Move all the uninstalled, non-destructive tests to check/
- Add a README
- Move utilities to utils/
- Move common files to common/
Closes: #304
Approved by: cgwalters
