IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is a followup to https://github.com/projectatomic/rpm-ostree/pull/888
but more comprehensive; in the layering case, the sanitycheck runs
after all the `%posttrans` scripts, so we'll get a consistent error message
for the `rm -rf /` test.
We also do the sanitycheck for the "pure ostree" case, as well as cases
where we didn't actually layer packages (including `ex override remove` as
well as simply regenerating an initrd).
There's obviously a lot more we could do in a sanitycheck; as I say in the
comment it's tempting to consider trying to boot systemd (in a fully volatile
config), but for now let's do this. In the end of course the admin has rollback
too.
Closes: #892
Approved by: jlebon
Now that we require clients to have an active session to RegisterClient,
we can't use runuser to check for non-root functionality. Add a new
vm_cmd_as() function to allow connecting as a different user. While
we're there, do some minor cleanups to consistently use `local` when
possible.
Closes: #894
Approved by: cgwalters
This test would actually fail even if the bin user were allowed to
install a package because there are no enabled repos to install. Fix it
so that we know we have foo there and explicitly check that the error
message is what we expect.
Closes: #894
Approved by: cgwalters
I was thinking today about our script handling, and I realized
an excellent way to showcase the advancement rpm-ostree makes
over traditional package managers is the fact that we survive a
`%post` script that does `rm -rf /`!
See e.g. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858521
It's been this way ever since we first implemented package layering;
the fact that we construct a new root and use bubblewrap to sandbox
makes us very resilient to this type of thing.
But, let's add a test case for this to be sure we preserve this behavior; for
example, if in the future we for some reason we decide to leak some host state
into the scripts.
Closes: #888
Approved by: jlebon
This is required for glibc-all-langpacks at least:
https://bugzilla.redhat.com/show_bug.cgi?id=1367585
Otherwise, its usage is...extraordinarily rare. In fact looking at a snapshot of
`rpm-specs-20170518.tar.xz` from Fedora, the only other use is in
`postfix.spec`, and it appears bogus (the value is already expanded at build
time).
But the glibc case is special, as the value of `install_langs` is indeed
potentially dynamic per system.
Closes: #873
Approved by: jlebon
The `install` command in CentOS 7 is too old to understand that
`-Dt foo/bar` means creating both `foo` and `bar`, which is useful so
that we avoid an explicit `mkdir` before. But we can't do that here.
Closes: #871
Approved by: cgwalters
Add experimental support for replacing packages from the base layer with
local RPMs. This is useful for example, to cherry pick a fixed package,
or to roll back to a previous package version. Like with pkg removals,
only files in /usr are actually replaced.
This patch also contains a few usability improvements as well, e.g.
showing the full NEVRA of removed packages rather than just their names,
and support for resetting overrides using either the pkgname or NEVRA.
Closes: #852
Approved by: cgwalters
Make sure that we wipe out any leftover configuration files from a
previous run before layering the test pkg, or we'll get false positive.
Also make sure to correctly clean up the VM in the case the livefs test
errors out.
Closes: #859
Approved by: cgwalters
Seen in the wild with `vagrant`'s use of `%post -p /usr/bin/ruby`. This was a
very easy fix, and actually makes the code a little bit nicer, as we no longer
need to explicitly make the script executable, since we now pass it as
`argv[1]`, the same way librpm does. That in turn would make it possible to fix
the TODO and use `bwrap --file`, but that can come later.
Closes: https://github.com/projectatomic/rpm-ostree/issues/856Closes: #858
Approved by: jlebon
Nuke all the previous goop that was used to create RPMs at `make check`
time and transition all the tests to use the new `build_rpm` function.
It definitely feels cleaner to use. It's also really nice to have the
spec live in the same file as the test that uses it.
Closes: #854
Approved by: cgwalters
The property of removal overrides dropping out if the package was
removed from the base layer felt a bit too magical and hacky. We really
should remember that wish and re-apply it if the pkg comes back. This is
similar to package layering: requests can become inactive (seems like a
better word than "dormant") if the package is already part of the base
layer, but they don't really go away.
This patch reworks the logic so that removal overrides work the same
way. In the status output, we now have both "RemovedBasePackages" and
"InactiveBaseRemovals" (which is only printed in verbose mode),
similarly to how we have "LayeredPackages" and "InactiveRequests". And
similarly, we also print out in the upgrader during a transaction all
the inactive base removals.
Another cool thing is that we now allow any pattern to be specified at
the CLI. E.g. `ex override remove /usr/bin/strace` will resolve to
strace.
Closes: #836
Approved by: cgwalters
In the error path when trying to remove a base package, we would try to
print a DnfPackage as char*, which of course didn't result in any
coherent output.
Closes: #833
Approved by: cgwalters
To catch things like https://github.com/projectatomic/rpm-ostree/issues/826
during testing.
(Really IMO this should be the system-wide default except GNOME and
lots of apps would start dumping core all over the place... 😢)
Closes: #828
Approved by: jlebon
Copy the bits from `overlay.sh` that takes the ostree files from the
build container so that we also get updated ostree bits when we
`vmsync`.
Also make sure to `daemon-reload` before restarting the daemon.
Closes: #803
Approved by: cgwalters
This was a kind of last-minute bug introduced when I tweaked the
checkout to use `.` to avoid a `mkdir()` for files. But there were
multiple bugs with that; for files that are in subdirectories of `/etc`
we obviously need to get the right subdir and not use `/etc`.
Second, we need to handle the case where we're adding new subdirectories.
This change fixes `rpm-ostree install firewalld + rpm-ostree ex livefs`.
Closes: #783
Approved by: jlebon
This is a valid case when layering local RPMs. Otherwise (e.g. if
specific non-local packages are requested), give the nicer error rather
than letting libdnf throw something less useful.
Closes: #780Closes: #781
Approved by: cgwalters
There are a few different use cases here. First, for layering new packages,
there's no good reason for us to force a reboot. Second, we want some support
for cherry-picking security updates and allowing admins to restart services. Finally,
at some point we should offer support for entirely replacing the running tree
if that's what the user wants.
Until now we've been very conservative, but there's a spectrum here. In
particular, this patch changes things so we push a rollback before we start
doing anything live. I think in practice, many use cases would be totally fine
with doing most changes live, and falling back to the rollback if something went
wrong.
This initial code drop *only* supports live layering of new packages. However,
a lot of the base infrastructure is laid for future work.
For now, this will be classified as an experimental feature, hence `ex livefs`.
Part of: https://github.com/projectatomic/rpm-ostree/issues/639Closes: #652
Approved by: jlebon
Now that rpm-ostree operations are cumulative, we need to make sure we
also clean up pending deployments. Also clean up the rollback for
consistency.
We also strengthen our ref handling. Always nuke the vmcheck ref (which
might not even exist anymore if a test rebased without --skip-purge) and
recreate it from the original ref.
Closes: #769
Approved by: cgwalters
Conceptually: we're going to move rpm-ostree and ostree at the same
cadence most of the time; for both releases *and* for git master.
The problem so far has been the latter part. Reusing FAHC
for the build gets us half of the problem.
The other trick I realized we can do - just pull ostree out from the build
container. This avoids fetching it from the internet, and makes my workflow for
hacking on both nicer - I just `sudo make install` in my build container for
ostree.
It's tempting to make the whole thing symmetric and require `sudo make install`
for rpm-ostree and not do the insttree thing but...perhaps after.
Closes: #758
Approved by: jlebon
This is preparatory for future changes which will make use the newer sysroot
writing API. But in this change, we can drop all of our version ifdef'd code.
Closes: #740
Approved by: jlebon
I want to be able to debug a test by sshing in with the same setup;
right now the suite resets and reboots by default.
This also required fixing how we deal with `/etc/yum.repos.d`, since at the
start of the test it could be either pristine or not.
Closes: #578
Approved by: jlebon
I need to build ostree from git too. So now my workflow is:
```
export insttree=/srv/walters/tmp/rootfs
cd ostree
make && make install DESTDIR=${insttree}
cd rpm-ostree
make && make install DESTDIR=${insttree}
env VMCHECK_INSTTREE=${insttree} make vmoverlay
```
Closes: #705
Approved by: jlebon
I originally thought there was a bug here, but missed we were skipping
symlinks earlier above. See [previous discussion][1].
Now, I'm not aware right now of something this patch actively fixes, but I think
it makes sense to be consistent in our handling of things here with respect to
symlinks.
1: 29dd1bd801..8158dcfb47 (r95017893)Closes: #689
Approved by: jlebon
Allow the `make vmcheck` target to take a HOSTS var, which is simply a
space-separated list of hosts on which we can run testsuites. Add a
multitest.py script that takes care of monitoring and scheduling the
tests onto the nodes.
The script itself is "dumb": we don't know how long each test can take,
so we can't do any smart/heuristic scheduling that could save more time.
Closes: #675
Approved by: cgwalters
1. Don't require an ssh-config
In the case of redhat-ci, the VMs are already fully configured for the
system (injected in the hosts file, host key accepted, etc...). So
there's no need to have an ssh-config there. In general, it should be
acceptable to run the vmcheck suite against a resolvable host without
having to create an ssh-config for it.
2. Make the host name configurable
Rather than hardcoding "vmcheck" as the hostname, allow overridding it
by specifying a VM env var directly. We also prepare the various scripts
to make use of the $VM variable whenever host-specific dirs/files are
created so that parallel runs won't step on each other.
Closes: #675
Approved by: cgwalters
Pull #646 introduced a subtle regression: we went from always including
a "packages" entry to only including it if there are packages present.
Albeit it's easy to guard against, though to be nice, let's make it
easier for consumers by always including it.
Reported-by: Micah Abbott <miabbott@redhat.com>
Closes: #670
Approved by: cgwalters
While reading a recent conversation about GPG checking at treecompose
time, I had a sudden thought - were we actually doing verification
client side? Turned out, we aren't. That happens as part of
`dnf_transaction_commit()` which we don't use.
That function verifies every package at one go, but for us I think it's better
to do it before "importing". We shouldn't have untrusted bits that we've
unpacked (they might have suid binaries, for one thing).
This is an embarassing problem, but it's worth emphasizing that everyone should
be retrieving repodata at a minimum over TLS, which sets a baseline. On RHEL, we
already do pinned TLS, and there are discussions about extending that elsewhere.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1422157Closes: #656
Approved by: jlebon
We don't want to expose the host's `/tmp` since that means scripts could
potentially find things like the X11 socket or whatever.
To debug things better, add a quick bash script to run bwrap like the C code
does. Perhaps down the line we can add `rpm-ostree internals run-bwrap` or so.
Closes: #647
Approved by: jlebon
Clean up the output of vmcheck a bit by printing out ssh debug details
and rpm-ostree status output to the log file. This will help make it
easier to quickly see which tests failed (as well as helping satisfy my
OCD for a nice output).
Closes: #645
Approved by: cgwalters
