IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Until we finally do the "store packages as ostree commits and union"
thing, doing commits can be slow, particularly into archive repos
where we pay lots of cost in gzip.
Let's show a progress bar. The implementation here uses a background
thread which communicates with the "UI" via atomics. The UI uses a
timer - and if stdout isn't a tty, we assume it's Jenkins or something
and dial updates back to every 5 seconds to avoid spamming output.
Closes: #409
Approved by: giuseppe
`ostree commit --table-output` can already do this, and since we're
super noisy for `compose tree` right now, we might as well print this.
It's useful to see how many new objects were created.
Closes: #409
Approved by: giuseppe
Users/administrators can now enable the "mutate-os-release" string
key to tell rpm-ostree to modify /etc/os-release in the following ways:
- All occurrences of the key's value found in VERSION, VERSION_ID, and
PRETTY_NAME will be replaced by the version string of new compose.
- A new OSTREE_VERSION key is appended containing the version string of
the new compose.
This provides an easy way for clients and third-party applications to
find out what version they are currently running.
Also bump libglnx so that we can use the latest version of
glnx_file_replace_contents_at() which supports AT_FDCWD.
Closes: #410
Approved by: cgwalters
Commit d153ece removes redundant transaction printing, but we do still
want to print it manually when we're doing a dry run.
Closes: #407
Approved by: cgwalters
...but still do print it for `compose tree` and `container`. This
is more followup to #403, where I noticed we were printing
just the overlay transaction in the middle of `Overlaying...`.
Since we're now printing the package diff again at the end, let's just
rely on that rather than show the user over and over which packages
they requested.
Closes: #403Closes: #404
Approved by: jlebon
This came up in #403, but looking at this more, I don't see a need to
print out the input package set here. The list of overlaid packages
is very clear in `rpm-ostree status`, and the user knows what they
typed on the command line.
Closes: https://github.com/projectatomic/rpm-ostree/issues/403Closes: #404
Approved by: jlebon
It's really in-your-face for admins to see `(unsigned)` which originally
was intentional, but in practice right now at least several major
users (Fedora, RHEL) don't enable GPG signatures.
So let's just hide it if not enabled.
Perhaps in the future we should add a `-v` option or something which
would show all of the fields even if not enabled.
Closes: #399Closes: #402
Approved by: jlebon
Since some of the DBus data like `CachedUpdate/commit` derives solely
from the ostree repo state, and `upgrade --check` only writes to the
repo, we need to watch for and reload from changes there too.
Closes: #392Closes: #400
Approved by: jlebon
Previously in #353 we changed this to not resolve the rev, but
that breaks the `CachedUpdateDetails` which actually wants it
to be resolved, to show pending updates.
This effectively reverts 749a5f03a8586392cafff949075c45a040d4e984
and changes things so we set `allow_noent=TRUE` and if there is
no ref, just return the deployment checksum.
Fixes: 749a5f03a8586392cafff949075c45a040d4e984
Closes: #392Closes: #398
Approved by: jlebon
In looking at this code, I noticed we were incorrectly mixing
`Option(GVariant)` with GError handling. If the deployment
had no refspec we'd return `NULL` but not set `error`.
Fix this by requiring a respec, and change the single caller that
relied on this to check outside.
Closes: #398
Approved by: jlebon
First I noticed we needed to query the new default *after* the
transaction had run. Then, I noticed the obvious embarassing logic
error.
Fixes: 3f1e7c85a18182669899f4065d23fec6ac0962c
Closes: #396Closes: #397
Approved by: jlebon
This is a useless test for now since we should be able to test on a VM
even if there are updates available.
I initially had it just as an example of the vmcheck test harness,
without actually thinking too much into what it was testing. But we do
need a nice test-basic.sh that will give rpm-ostree a good general
workout.
Closes: #394
Approved by: cgwalters
We don't have a lot of outstanding changes to the C code, so now seems
like a good time to do this. I implemented this with some highly
sophisticated sed commands like:
```
find -name '*.c' | while read name; do sed -i -e 's,gs_unref_object \([A-Za-z]*\) \*,g_autoptr(\1),' ${name}; done
```
Part of dropping the dependency on libgsystem, same as what we're
doing in ostree.
Closes: #393
Approved by: jlebon
So that it's easier to build bubblewrap as `Source1` in an RPM
embedded (flatpak is using a git submodule, but for this I think
`Source1` is better).
Closes: #384
Approved by: jlebon
dockerwait: if we're running on a freshly booted VM, we want to make
sure that docker is running before trying to spawn the container.
check: runs the same target inside the container; this is useful for
coverage analysis, where we want the same binaries to run both the `make
check` and `make vmcheck` testsuites.
clean: for convenience.
Also make sure we pass CFLAGS to both the configure (to propagate to
libhif's cmake) and the make steps. This is also of use for coverage
analysis, where we want to compile with `--coverage`.
Closes: #378
Approved by: cgwalters
Add a clean hook so that `make clean` on the top dir also cleans the
libhif artifacts.
Add -f to `ln` -- Make marks the target as out-of-date if the symlink
breaks (which will happen if you just `make clean` in the libhif-build
dir), but the `ln` will cause the build to fail since it already exists.
Closes: #377
Approved by: cgwalters
For some reason, the VM would sometimes take a very long time to reboot
after deploying the new commit. Adding a sync before rebooting fixes
this, though I'm not sure why the filesystem doesn't sync itself as fast
without it.
Closes: #371
Approved by: cgwalters
- Rename test-layering.sh to test-layering-basic.sh and make it test
both pkg-add and pkg-remove.
- Add test-layering-relayer.sh, which verifies that pkgs are properly
relayered during the creation of new deployments (e.g. upgrades,
rebases, deploys).
- Add test-layering-rpmdb.sh, which verifies that packages respect the
rpm requirements before being overlayed.
Closes: #371
Approved by: cgwalters
Print out a better summary that sums up the passes, failures, and skips.
Silence the restoring step at the end of the testsuite by only echo'ing
to the log file. Finally, add some colouring because colours are
awesome.
Closes: #371
Approved by: cgwalters
The `rpmostreed_refspec_parse_partial` method would only work with
refspecs that include a remote. This was causing rebases to fail when
specifying a local ref. However, it should be perfectly valid to do
this. Adapt the function.
Closes: #371
Approved by: cgwalters
We would unconditionally call ostree's pull() regardless of whether the
branch we were tracking was remote or not. We need this to work to make
it easier to write tests, though it's a worthy addition on its own.
Closes: #371
Approved by: cgwalters
The origin might have an empty "requested" key in the "packages"
section, which is probably an indication that packages were once added
but were then removed.
Explicitly check the length of the pkg array in case it's actually
empty before adding the base-checksum to the deployment variant.
Closes: #371
Approved by: cgwalters
Add some notes in the manual about package layering. Would be nice to
have `ostree admin unlock` also be part of the ostree manual for a
better contrast of the two.
Looking at the other snippets in the document, this makes me think we
probably should also add wrappers in `/usr/bin/atomic` for the new
commands. Or maybe we should wait until they're not in preview mode
anymore.
Closes: #374
Approved by: cgwalters
Tests were failing because we were silently falling back to the system
libhif, which, as of PR #158, changed a string from non-const to const,
which meant we were double free-ing strings.
Closes: #373
Approved by: cgwalters
I'm thinking this list of things actually needs to live outside of the
source code and be more obvious (and we should file bugs to get the
packages fixed), but in the short term my demo today uses Vagrant and
it'd be nice if it was installable.
Closes: #364
Approved by: jlebon
