IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add an annotation so that the generated D-Bus code allows rpm-ostree to
pass fds through messages. Note that this doesn't change the API itself,
only how rpm-ostree uses the GDBus library. Clients should still be able
to invoke PkgChange() as before.
Closes: #696
Approved by: cgwalters
Following up on the previous commit regarding timestamps - the checksum of the
derived commit isn't very useful. It's not going to be the same between any two
people's systems. What we should show instead is the rpm-md repository
timestamps.
In the short term though, I think omitting this even without the rpm-md
timestamps is better. Less visual clutter.
Closes: #697
Approved by: jlebon
Currently we propagate the version field from the base to derived,
but the status UI shows the timestamp from the derived commit.
I found this *extremely* confusing when I was trying to reason about the
up-to-dateness of my system. The version and timestamp should be locked
together so we display them consistently.
When we generated the local commit isn't really useful information; conceptually
we have the base timestamp, plus timestamps for the rpm-md repos. We should
display the latter instead.
(This also adds `base-timestamp` and `base-verison` to the JSON; only
the former is new information, but the latter helps us be consistent)
Closes: #697
Approved by: jlebon
This takes commit c437f90 a bit further. We delete more #ifdef 0 blocks
which can just be revived later on if we need it.
Closes: #695
Approved by: cgwalters
There's no point to shipping these backup files in the base tree. We already had
code to delete them for the package layering case where they caused active harm.
At the point we added that code we really should have *also* changed treecompose
to delete them. Better late than never.
The reason I'm doing this now is because having them in the base tree causes `ex
livefs` to spuriously think that layering a package that *doesn't* change `/etc`
as if it does, because the layering code deletes the backup files.
Closes: #693
Approved by: jlebon
This is a follow-up to #683. All the experimental commands will be under
`rpm-ostree ex`, so we remove the flag and instead print the notice
before dispatching the subcommand, where we can print the correct name.
Closes: #688
Approved by: cgwalters
The goal is to consolidate our "experimental" functionality under one
subcommand. This makes it easier to determine when things "graduate"
to permanent-stability status under the main command line.
Closes: https://github.com/projectatomic/rpm-ostree/issues/682Closes: #683
Approved by: jlebon
I built+installed ostree git master with
https://github.com/ostreedev/ostree/pull/723 in my dev container,
which broke the rpm-ostree tests. Kind of embarrassing that
I forgot to check rpm-ostree for usage of `ostree trivial-httpd`.
This is another thing that really wants a shared test container.
Anyways let's just use Python for this.
Closes: #684
Approved by: jlebon
We had lots of copies of this code, and while I'm not planning on changing it, I
decided to dedup on general principle.
Closes: #681
Approved by: jlebon
I'd like to embed structured metadata about the originating git
repository. See [this example](https://pagure.io/fedora-atomic-host-continuous/c/142b12020d7efe18b56d039304efea102a210790?branch=master). However, I think what we really
want here is a *single* value which has subkeys.
One thing in the back of my mind too is...we could use this to
enhance our "change detection". Right now we checksum the sack,
treefile, and treecompose-post. But down the line, I'd
like to support more sophisticated postprocessing, where the
script might reference external files or the like.
In that case, we could stop checksumming the post script, and rely on whether or
not the git repo changed. (This would conversely mean we would do a build even
if e.g. the repo's `README.md` changed, but we can address that with a
post-assemble content check).
Anyways though, for now, this gets us the ability to more easily drop more
structured metadata in the commit, whether it's input git repos, tests that
passed, etc.
Note a trap that bit me here: since the metadata we write here is *host* endian,
but `ostree show --raw` byteswaps (it needs to since the core ostree variant
is always big endian), we get inverted numbers if the host is little.
I think we should probably canonicalize our metadata to big endian; this should
be pretty backwards compatible since I doubt anyone has been adding raw numbers
so far.
Closes: #676
Approved by: jlebon
Should have no effect right now, since there's actually
no way we expose at the moment to write anything other
than strings.
But it will be useful when we add a way to write arbitrary metadata; see
https://github.com/projectatomic/rpm-ostree/pull/676Closes: #679
Approved by: jlebon
Preparatory work for a future patch; by having a hash it's easier to handle
duplicates. Note I started trying to use decl-after-stmt but hit the fact we're
still using `goto out` here.
Closes: #679
Approved by: jlebon
I just noticed this while reading the code. Right now we're actually following
links (since `AT_SYMLINK_NOFOLLOW` isn't implemented), which could definitely
lead to bad things if e.g. one has a symlink pointing to a file which shouldn't
be executable or world-readable etc.
(Also I noticed our hardlink-breaking-only-if-regular logic is now broken;
I added a TODO)
Closes: #677
Approved by: jlebon
I still need to query whether Fedora has anything like this; maybe `/boot`? But
things are not likely to work right now if we do, so let's ignore it.
Closes: #677
Approved by: jlebon
This gives me now:
```
error: While applying overrides for pkg mock: fstatat: etc/mock/custom-1-aarch64.cfg: No such file or directory
```
Which is definitely more useful for debugging 💣.
Closes: #677
Approved by: jlebon
Make use of the new support for parallel execution. In the best case,
this should bring down the execution time to about a third.
Closes: #675
Approved by: cgwalters
Allow the `make vmcheck` target to take a HOSTS var, which is simply a
space-separated list of hosts on which we can run testsuites. Add a
multitest.py script that takes care of monitoring and scheduling the
tests onto the nodes.
The script itself is "dumb": we don't know how long each test can take,
so we can't do any smart/heuristic scheduling that could save more time.
Closes: #675
Approved by: cgwalters
1. Don't require an ssh-config
In the case of redhat-ci, the VMs are already fully configured for the
system (injected in the hosts file, host key accepted, etc...). So
there's no need to have an ssh-config there. In general, it should be
acceptable to run the vmcheck suite against a resolvable host without
having to create an ssh-config for it.
2. Make the host name configurable
Rather than hardcoding "vmcheck" as the hostname, allow overridding it
by specifying a VM env var directly. We also prepare the various scripts
to make use of the $VM variable whenever host-specific dirs/files are
created so that parallel runs won't step on each other.
Closes: #675
Approved by: cgwalters
Allow users to directly specify an RPM file on the command-line. The
"packages_added" array of the PkgChange() method can now contain
absolute paths to RPM files.
Grow the origin format to have a new "requested-local" key. This is
similar to the "requested" key, except that the packages are always
installed from cache. The "requested-local" array values also embed the
SHA-256 of the header we expect.
There is now a new "LocalPackages" line in the status. These packages
are a subset of the "packages" element (which are printed as
"LayeredPackages") and represent the packages that are explicitly marked
for installing from cache.
Interesting design choices/notes:
- Just as before, even with foo-1.0-1.x86_64 installed from RPM, a
user can still request "/usr/bin/foo": it will be made dormant. As
soon as foo stops being explicitly layered from the RPM, it will try
to fulfill the request by going to the repos. This allows users to
"pin" a layered package to a certain RPM, and then unpin it.
- The strings/NEVRAs in "requested" and "requested-local" are strictly
distinct. This allows us to be able to tell what the user means
exactly when they do "rpm-ostree uninstall".
Closes: #657
Approved by: cgwalters
We start by adding support in the core for installing packages strictly
from the cache repo. We fool the libdnf stack by re-exporting the header
as an RPM, and explicitly marking it for install. The treefile format
supports specifying the expected SHA-256 of the metadata header, in case
the cache for a specific NEVRA changed.
Closes: #657
Approved by: cgwalters
This will fix rpm-ostree-in-mock-in-koji. The drawback is minor: post scripts
will have network access. But we're going to be testing the no-network case in
our Docker-based builds, so that's fine.
Closes: #672
Approved by: jlebon
Pull #646 introduced a subtle regression: we went from always including
a "packages" entry to only including it if there are packages present.
Albeit it's easy to guard against, though to be nice, let's make it
easier for consumers by always including it.
Reported-by: Micah Abbott <miabbott@redhat.com>
Closes: #670
Approved by: cgwalters
We'll keep a copy here for now, though the canonical
version should be viewed as the Fedora dist-git.
Updated-by: Colin Walters <walters@verbum.org>
Closes: #667
Approved by: jlebon
Down the line we should have a saner stringification, and also
log things like the invoking `loginuid` etc.
But this gets us something.
Closes: #660
Approved by: jlebon
Preparation for idle exit - the daemon knows when it should idle exit. It's
tempting to move all of the mainloop logic there, but it'd be more code churn
than I want to do right now.
Closes: #660
Approved by: jlebon
This is part of the idle exit work - the higher level daemon logic needs to
track running transaction state, so we can combine that with whether we have `> 0` clients.
(Yes, we need a better stringification of txns)
Closes: #660
Approved by: jlebon
Now `systemctl status rpm-ostreed` will show it. In future patches I plan to add
whether we have an active txn and our pending idle exit timeout.
Closes: #660
Approved by: jlebon
This is like what bluez does. With this, we have a stronger mechanism to avoid
races with future work to auto-exit on idle. Registered clients
hold a reference to the daemon effectively.
Note that calling `UnregisterClient` is optional if the calling process is going
to exit soon - as is the case for using the command line binary via e.g.
`rpm-ostree status`.
Closes: #660
Approved by: jlebon
More info here:
- https://lists.freedesktop.org/archives/dbus/2015-May/016671.html
- https://github.com/cgwalters/test-exit-on-idle
This is preparatory work for doing exit-on-idle, which we want to do because we
currently leak memory badly. Even if we didn't leak, it's still better to not
have services sit around resident.
While I had the patient open, I did some code cleanup such as switching to
direct `g_main_context_iteration()` and using `sd_journal_print()` instead of
`g_warning()` etc.
Closes: #660
Approved by: jlebon
The equivalent of https://github.com/ostreedev/ostree/pull/718
but for this codebase.
I just picked one example at random, there's plenty of others, but I don't want
to do any kind of tree-wide conversion since we have lots of outstanding
patches.
Closes: #664
Approved by: jlebon
It's useful to see how many new objects were added and how much storage they
use. Just part of a general trend where I'd like to make a lot more extensive
use of the journal, particularly with structured logging.
Closes: #661
Approved by: jlebon
