IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
One thing that's very confusing about OSTree is there are two layers -
deployments and the refs/commits. If one does an `rpm-ostree upgrade`, but then
e.g. `ostree admin undeploy 0`, you still have the new revision in the repo.
We don't do a good job of displaying this state, or helping people clean
it up.
Down the line, I also want to better support something like `rpm-ostree pull` to
cache updates explicitly *without* deploying.
This commit just adds a bit of information to the status display. We might want
to have better formatting, but I think this an OK start.
Closes: #595
Approved by: jlebon
The actual problem I am trying to fix with this is fallout from the
introduction of `/usr/libexec/rpm-ostreed`, which required a SELinux
policy change. Specifically for CentOS, the base policy is rev'd
slowly.
My hope was that by merging the daemon code back into `/usr/bin/rpm-ostree`
which is labeled `install_exec_t`, starting via systemd would do
the right thing. It turns out that doesn't happen.
Now later, I'm picking this patch back up because I want to do multprocessing in
the daemon (and in the core), and it makes sense to share code between them,
because multiprocessing will need to go through a re-exec path.
Another benefit is we avoid duplicated text (libglnx, internal helpers) between
the two binaries.
Closes: #292
Approved by: jlebon
When we checked out the base tree for package layering, we would create
the directory in which ostree did the checkout. This meant however that
ostree wouldn't apply xattrs on the root directory itself. This would
cause the directory to be mislabeled (as system_conf_t instead of
root_t), which in turn cause SELinux violations on reboot when systemd
tried to make the root mount shared.
This patch fixes this by first settling on a permanent directory in
which to do checkouts -- really, we'll never have multiple package
layering operations going on at the same time. Once we know that we have
a reserved path, we can safely let ostree create it for us with the
proper xattrs.
Resolves: RHBZ#1318547
Closes: #605
Approved by: cgwalters
Currently we push for a model where the initramfs is
generated (in non-hostonly mode), and merely replicated.
However, to support a few unfortunate corner cases like dm-multipath which wants
to inject a config file into the initramfs, we need to support regenerating it
client side too.
Down the line, we'll need this to support overriding the kernel too.
This changes things in the core to add the concept of an "empty"
`RpmOstreeContext`. I initially tried skipping it, but that was too much
duplication. We still want all of the core ostree-related logic that lives in
that code too.
The treespec bits barfed if the spec didn't have a `tree/packages` key. It was
simplest to change that to allow it - and because that was the only case where
we errored out in parsing, I dropped the error handling.
There was another place in the upgrader that now needed to be fixed to handle
transitioning from just regenerating initramfs to not.
Closes: #574
Approved by: jlebon
I think since I landed a change to `--enable-new-name`, `/usr/bin/rpm-ostree`
became a symlink, and without the `-l` switch, rsync skips over them.
Hence, we have only been testing in vmcheck the old binaries, not new ones.
Oops.
Closes: #585
Approved by: jlebon
In the container build + vagrant test workflow, we have to run `make
vmsync` from the env in which autoconf was run, which is the container.
However, when using git worktrees (which is useful in this scenario to
avoid having to overwrite your local builds) and a CentOS build
container, the git inside is too old to understand worktrees, so let's
avoid invoking git in any of the test harness scripts.
Also make sure to restorecon after installing the new rpm-ostreed.
Closes: #555
Approved by: cgwalters
Add a few more tests to exercise some of the treefile options. We do
need to also expand test-basic.sh itself to sanity-check the structure
of a normal ostree compose. That's up next on the list.
Closes: #548
Approved by: cgwalters
This is just the final bit required to make sure the vagrant and
non-vagrant paths can work happily together. It's mostly minor fixes,
though the most major change which also affects vagrant is that we now
sync to the root home dir, rather than ~vagrant.
Closes: #524
Approved by: cgwalters
My development environment is now using "pet" docker containers.
I use VMs for testing things that require that (like rpm-ostree).
This patch builds on work from @jlebon in
https://github.com/projectatomic/rpm-ostree/pull/509
to rework `vmcheck` such that it can work on any `ssh-config`. By
default we expect this to be Vagrant.
However, I go a lot farther and delete the `vmbuild` code that was
trying to do builds in a container on the target VM. I think this is
still worth pursuing at some point, but for now I think it's
reasonable to assume that the rpm-ostree developer audience uses Linux
as their host workstation and hence has containers.
(There's another important point here in that for developing lower
level things like rpm-ostree, there's a strong push to make the VM
disposable and not a pet)
Closes: #516
Approved by: jlebon
Thought it'd be fun to write a test for verifying proper handling of
scriptlets during package layering. There's obviously a lot more that
could go in here (patches welcome!), but it's a start.
Closes: #434
Approved by: cgwalters
This is a useless test for now since we should be able to test on a VM
even if there are updates available.
I initially had it just as an example of the vmcheck test harness,
without actually thinking too much into what it was testing. But we do
need a nice test-basic.sh that will give rpm-ostree a good general
workout.
Closes: #394
Approved by: cgwalters
- Rename test-layering.sh to test-layering-basic.sh and make it test
both pkg-add and pkg-remove.
- Add test-layering-relayer.sh, which verifies that pkgs are properly
relayered during the creation of new deployments (e.g. upgrades,
rebases, deploys).
- Add test-layering-rpmdb.sh, which verifies that packages respect the
rpm requirements before being overlayed.
Closes: #371
Approved by: cgwalters
Print out a better summary that sums up the passes, failures, and skips.
Silence the restoring step at the end of the testsuite by only echo'ing
to the log file. Finally, add some colouring because colours are
awesome.
Closes: #371
Approved by: cgwalters
We now make the test harness handle restoring the VM to the original
state. The wonderful thing about ostree here is that it's a perfect
shoo-in for this. We make a 'backup' of the current ref, and just have
to make sure that the VM is back on that ref after running each test.
This will allow us to write tests without worrying as much about
cleaning up in the event of an error.
Closes: #360
Approved by: cgwalters
This is a preliminary package layering test which simply installs the
foo package and verifies that it functions properly. A bunch of
primitives are added to libvm.sh to facilitate this and future tests.
Closes: #344
Approved by: cgwalters
This is a very simple test harness inspired by the atomic one. It's a
simple bash script that sets up a permanent ssh connection to the host
and runs the test scripts. Also add a "demo" test-basic.sh test to make
sure that it works.
Closes: #344
Approved by: cgwalters
If the dir that was rsync'ed already contains build artifacts, we don't
want those contaminating our build process.
Closes: #336
Approved by: cgwalters
The `make vmshell` target makes it even easier to immediately try out
your changes in a live running Atomic Host. It will automatically
provision the VM, sync your latest changes, build, install in a new
deployment onto which the VM is rebooted, and drop you in the shell.
Closes: #321
Approved by: cgwalters
In order for vmcheck to be useful for testing, we need the machine to be
in a "clean" state. That is, sitting on a commit, ready for being
manipulated.
This is a small step towards this goal. Instead of overwriting the
files, we use rofiles-fuse to safely install and create a new
deployment.
Closes: #321
Approved by: cgwalters
I find myself not liking the name rpm-ostree anymore; it's
descriptive, but unfortunately we compete with other projects with
easier and sexier names.
Also, people continually find the ostree and rpm-ostree layering
unclear. It's *much* easier to say "nxs depends on ostree", even
though textually it's obvious "rpm-ostree depends on ostree".
Anyways, just an experiment for now.
Closes: #307
Approved by: giuseppe
This is infrastructure that's oriented around Vagrant, we do builds
inside the target VM (actually inside a Docker container), but then
directly `make install DESTDIR=/host/`.
The goal here is to have a convenient workflow for:
- dev -> hand testing
- dev -> run destructive tests
Closes: #303
Approved by: jlebon
