IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In the majority of cases, we just want to know if a deployment is
layered and what the base commit is. Make a simpler accessor for this.
We can further simplify the logic on the client side here by relying on
the fact that there is only a base layer iif we're layered, so we don't
need two output variables.
I find it also makes things much easier to grok in some places, e.g. in
`rpmostreed-deployment-utils.c`, we now have:
const char *current_base_checksum = current_base_checksum_owned ?: current_checksum;
which better crystallizes what we want to get at.
Or e.g. in the sysroot upgrader, we can drop a comment which states
something that is now completely obvious.
Closes: #1560
Approved by: cgwalters
We only want to copy our own rpmdb to the base rpmdb location in the
server-side paths. OTOH, when creating layered commits client-side, we
want to make sure that we *don't* touch the base rpmdb location.
Accordingly, move the logic that does the hardlinking into
`postprocess_final`.
This can cause issues if we want to make use of the base rpmdb (as in a
forthcoming patch) of commits that were not created by a recent enough
rpm-ostree which inject the base rpmdb. When layering on such base
commits, we would unwittingly copy the new rpmdb (with the layered
packages) into the base rpmdb location. This then of course throws off
any logic that assumes the rpmdb at that location is from the base
layer.
There's a slight compatibility issue here: there are still older layered
commits out there where we did this and which might throw off new logic
that relies on this. We bump the clientlayer version so that we can just
check for that version to know whether it's safe to use the base rpmdb.
Closes: #1560
Approved by: cgwalters
I'm going to add a new user soon. This should probably
be a best practice.
Ideally...cbindgen would have a way to add some wrapper bits
around any types it defines or something?
Closes: #1559
Approved by: jlebon
This change gives an error when --arg is specified on its own.
Previously, if adding --arg without --enable, no changes occur and
only the initramfs regeneration status is printed. Since --arg only
takes effect when used with --enable, this should also give an error
(or let the user know in some way).
Closes: #1548
Approved by: jlebon
Previously, after enabling initramfs regeneration, the initramfs
command would indicate that initramfs regeneratin is disabled,
suggesting that the initramfs had not actually been enabled. This
happened because the initramfs regeneration status for the current
deployment was printed; initramfs regeneration is only enabled for a
pending deployment.
This change prints the regeneration for the pending deployment,
rather than the current, when no options are given to the initramfs
command.
Fixes: #1526Closes: #1548
Approved by: jlebon
It's possible to run the `vmcheck` tests against an existing host that
has `rpm-ostree` already present. We don't overlay the built binaries
in this situation, so we should not check for the presence of the
overlay in the commit meta.
Closes: #1555
Approved by: cgwalters
This removes the logic around supporting opting out of the staging
feature. We don't want to support multiple configurations here, and at
this point, staging should be considered stable.
Closes: #1546
Approved by: cgwalters
This is [brown paper bag bug](http://www.catb.org/jargon/html/B/brown-paper-bag-bug.html)
for sure. But it's existed forever. Basically our recursion
when parsing `include:` ended up parsing the first included treefile
twice.
I noticed this with the new `postprocess` element - luckily
my script was idempotent. Historically we've gotten away with
this probably because the main thing is the `packages` array
and duplicates don't matter there.
Closes: #1552
Approved by: jlebon
Because our primary delivery vechicle uses RPM which
supports separate debuginfo, there's no reason not to build release
builds with debuginfo, so that one can use gdb on them just
like we do with C.
Closes: #1550
Approved by: jlebon
The `curl-sys` crate includes with it a bundled copy of libcurl which is
used if `pkgconfig` doesn't find libcurl configuration files. In our
case, we always want to use the system libcurl. So filter it out. This
also drops our *compressed* tarball by 2.5M.
One tricky bit is that cargo crates include a checksum JSON that's read
by `cargo build` later on to validate the crate. So we need to do some
JSON surgery.
What made me look into this was that Koji builds were failing due to the
`%configure` macro including hardening bits that sub out e.g. all
`config.sub` and `ltmain.sh` files which then caused the checksum to
fail validation. This completely sidesteps that issue.
Closes: #1554
Approved by: cgwalters
The script already turned on `-e` later on. Make it conform to the
standard strict mode with the rest of the options right at the
beginning.
Closes: #1554
Approved by: cgwalters
We had two `libcomposetest.sh` which I always found confusing.
Fix the naming of the one that's shared with `ex-container`
to be more obvious.
Closes: #1543
Approved by: jlebon
Accumulate the list of requested packages that were not found and error
out with the full list rather than failing early. This fixes a small UX
papercut in certain situations.
Closes: #1540Closes: #1541
Approved by: cgwalters
Right now, we're compiling against librpm 4.14.2, but running against
4.14.1, so we're hitting missing symbol issues from #1469. Just use the
updates ref for now until the next stable FAH update.
Closes: #1538
Approved by: cgwalters
Let's be more graceful here for people who `yum install rpm-ostree`
and expect magical[1] things to happen.
Closes: https://github.com/projectatomic/rpm-ostree/issues/1537
[1] Understandably if one doesn't know lots of background
Closes: #1538
Approved by: cgwalters
For higher level tools driving rpm-ostree, the command line arguments
are mostly OK as inputs, but the addition of `--write-commitid-to`
shows that we really want structured data that these tools can parse.
JSON is a good enough interchange format, let's use that.
Most notably this does a pkgdiff in the JSON which several higher
level tools do too.
Closes: #1529
Approved by: jlebon
I'm splitting up coreos-assembler to have separate fetch/build
stages, with the first using `--download-only` and the second
using `--cache-only`, and the message from `fetch` is basically
wrong.
Closes: #1534
Approved by: jlebon
Just like the other ones from commit: 716b60b7d7
Yes, we probably should just patch the package but then
we'd have to wait for all of the koji/bodhi pain.
Closes: #1532
Approved by: sinnykumari
Since `/tmp` might be on tmpfs, so we'd lose it on reboot. But we have
tests that need it to persist across reboots.
Closes: #1531
Approved by: miabbott
It's possible to run the `vmcheck` tests against an existing VM which
may not have any existing `/etc/yum.repos.d` directory. Since the
tests are providing their own repo files, we should be able to run
them in this uncommon configuration.
Closes: #1530
Approved by: jlebon
Prep for rojig-only compose support. We want to be able
to quickly detect whether or not there were changes in the
input, just like we do when targeting an OSTree repository.
Closes: #1528
Approved by: jlebon
If a `--workdir` was explicitly provided, we would pass `-1`
down into the Rust libs.
I found this while working on rojig-only which is reworking
the workdir bits.
Closes: #1528
Approved by: jlebon
If we're going to scale out our oxidation, let's follow
the path of Firefox (and other projects) further and use
cbindgen: https://github.com/eqrion/cbindgen
It's actually nice that `cbindgen` is packaged today in Fedora,
but I doubt it is elsewhere; we may end up needing to push
that forward, or just vendor it via a `build.rs` script and Cargo.
I chose to rename things to `ROR`/`ror_` since it's shorter. I
am tempted a bit to rename our internal functions to just `ro_` to
or so.
Closes: #1516
Approved by: jlebon
I'm trying to have a more opinionated model where custom builds
use inheritance, and currently one can only have a single
`postprocess-script`.
Further, in YAML it's very convenient to use inline vs external
data.
Closes: #1527
Approved by: jlebon
Per tile, added logic for sysusers_sorting. The comparison
for each sysuer_ent is like the following:
1: g > u > m for sysent_type and this takes precedence
2: if type matches, we compare the name for sysent using strcmp
3: If both type and name matches, we want to error out because it indicates a duplicate entry
Closes: #1519
Approved by: cgwalters
Adds function that interprets sysuser struct into usable string
content, which can later be used as content for `sysusers.d` files
Closes: #1519
Approved by: cgwalters
Similar to the passwd conversion, this commit
implements conversion of group entries into sysuser struct entries
Tests are also included in the commit
Closes: #1519
Approved by: cgwalters
Adds initial implementation of converting passwd entries(read from
/etc/passwd file) into sysuser_ent structs.
The converted sysuser_ent struct will then get tracked inside
a pointer array.
Closes: #1519
Approved by: cgwalters
This commit adds dir, geco and shell information to passwd_ent so
that they can be used later in sysusers section.
This also adds the sysuser_ent struct to track information of the
converted sysuser entries
For more information, please refer to https://github.com/projectatomic/rpm-ostree/issues/49Closes: #1519
Approved by: cgwalters
It turns out we basically have to slap an `Option<T>` around
everything, (in particular `bool` etc.) we need to be able
to distinguish in (I believe) all the cases between
"value unspecified" and "value provided".
Concretely it didn't work to try to set `machineid-compat: false`
in an included yaml treefile becuase it was just defaulted to `true`
by the toplevel.
Down the line we should move all of the parsing into Rust
and have two different `struct` types for "YAML we load" versus
"verified treefile".
Closes: https://github.com/projectatomic/rpm-ostree/issues/1524Closes: #1525
Approved by: lucab
https://fedoraproject.org/wiki/Changes/RemoveExcessiveLinking
broke our build, since Rust doesn't yet have a way to express
the fact that the static library has dynamic dependencies.
(AIUI this is actually something libtool can handle with `.la` but eh)
Closes: #1522
Approved by: cgwalters
I'm trying to debug a libdnf build issue with the rpm-injected
`export LDFLAGS='-Wl,-z,relro ...`
and it's very helpful to have `--disable-silent-rules` or `make V=1`
do the right thing automatically for CMake too.
Closes: #1520
Approved by: peterbaouoft
It seems like `4.14.2-rc1` orders later than `4.14.2`, which is causing
issues in f28 builds.
Also print the version of librpm at configure time.
Closes: #1515
Approved by: cgwalters
This teaches the client to fetch packages from URLs directly so that one
doesn't have to `curl` first and then install. Supported anywhere
package filenames are allowed (notably: `install` and
`override replace`).
One neat things about this is that we download the file into an
`O_TMPFILE` and then pass on ownership of that fd directly to the
daemon. So at no point are the packages actually laying visible on the
system. (Assuming the filesystem supports `O_TMPFILE` that is).
This adds direct linking to libcurl and openssl, two libraries which we
were already pulling in indirectly.
Closes: #1508
Approved by: cgwalters
This is for: https://github.com/projectatomic/rpm-ostree/issues/718
But I'm not going to close that issue as this only does the server
side, and I think we should support it client side too.
Since I wrote that issue, we ended up skipping the `dnf_transaction_depsolve()`
API, and hence we don't need to block on a libdnf change. So
this was quite simple.
Closes: #1513
Approved by: jlebon
This treats strs=NULL as an empty array and returns FALSE on the basis
that a string (str) is not contained in an empty array. If str == NULL,
then a run-time assertion will fail.
Previously, a segmentation fault occured when NULL was dereferenced,
expecting NULL to be handled by rpm_str_ptrarray_contains.
fixes#1494Closes: #1507
Approved by: jlebon
When building in `debug` mode, `RUST_DEBUG` was still turned off because
`rust_debug_release` was set to `yes`, not `debug`.
Fix this by tweaking how `--enable-rust-debug` works: when it's *not*
provided, we default to the `$CFLAGS` detection logic. Otherwise, it
overrides it.
Closes: #1514
Approved by: cgwalters
