IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The use case here is to run our tests against the shipped tree;
this could be used by a-h-t for example:
https://github.com/projectatomic/atomic-host-tests/issues/74
I tried this with just `TESTS=basic` and it failed for `usroverlay`. So we'd
have to start adding feature detection to the test suite to make this truly
useful, but let's at least start with the basic bits now to play with it.
Closes: #1251
Approved by: jlebon
This patch introduces a new `AutomaticUpdatePolicy` configuration. This
was a long time coming for rpm-ostree, given that its update model makes
it extremely apt for such a feature.
The config supports a `check` mode, which should be very useful to
Atomic Workstation users, as well as a `reboot` mode, which could be
used in its present form in simple single node Atomic Host situations.
There is still a lot of work to be done, including integrating
advisories, and supporting a `deploy` mode. This feature hopefully will
be leveraged as well by higher-level projects like GNOME Software and
Cockpit.
Closes: #1147
Approved by: cgwalters
For CI purposes at least, these features are already part of FAH and the
latest CAH smoketested. Anyway, we're already hacking the latest ostree
into place for `--keep-metadata`. If it already supports the latter,
then clearly it'll support those.
Closes: #1215
Approved by: cgwalters
I spent some time trying to figure out why on CentOS my changes to
`/etc/rpm-ostreed.conf` didn't seem to have any effect. It turns out
that for some reason I didn't spend too much time looking into, the
autoconf in CentOS defaults to `${prefix}/etc` when `--prefix` is given.
This is also why I was under the erroneous assumption that D-Bus config
files were in `/usr/etc` in CentOS. This patch fixes that as well.
Closes: #1215
Approved by: cgwalters
One issue right now is that repeated applications of `make vmoverlay`
will result in losing the source title.
Let's use the new `--keep-metadata` in subsequent `make vmoverlay`
invocations to make sure it gets transferred over correctly.
Closes: #1205
Approved by: cgwalters
This makes it much easier to know how old the base we're working from is
and whether it's time to upgrade before hacking some more.
Closes: #1205
Approved by: cgwalters
Depends: https://github.com/ostreedev/ostree/pull/1296
As I mention in the commit there, I see two uses for this in rpm-ostree; first
in our test suite, and second for OCI-built image imports.
I also took a step further here and inject an `original-origin` metadata
key, though we aren't actually using that yet. The problem I'm trying
to solve there is that repeated `make vmoverlay` starts chaining things up,
but that gets very confusing. I think we should always have `vmoverlay` unwind
back to the base ref. (Or at least do that by default)
Closes: #1069
Approved by: jlebon
We don't need those in the tree, so let's nuke them. This also fixes
subtle compatibility issues between hardlinks and lock files (see #999).
Closes: #1002
Approved by: cgwalters
Let's make SELinux and atomic-host-tests happy with trees we concoct
ourselves by using the new --selinux-policy. (Specifically, we want our
sync'ed binaries to have install_exec_t).
Closes: #953
Approved by: cgwalters
Let's make using a custom install tree easier and document the process.
We split out the insttree step into `build.sh` so that we no longer have
to `flock(1)` around it, and also share between `overlay.sh` and
`sync.sh`.
Closes: #968
Approved by: cgwalters
Fix regression from https://github.com/projectatomic/rpm-ostree/pull/870
which caused `vmsync` and `vmoverlay` to no longer actually overlay
ostree bits.
We go back to using `--files-from`, but just make sure to filter out the
stuff that we don't need (and which previously caused issues).
Closes: #907
Approved by: cgwalters
Now that we require clients to have an active session to RegisterClient,
we can't use runuser to check for non-root functionality. Add a new
vm_cmd_as() function to allow connecting as a different user. While
we're there, do some minor cleanups to consistently use `local` when
possible.
Closes: #894
Approved by: cgwalters
Copy the bits from `overlay.sh` that takes the ostree files from the
build container so that we also get updated ostree bits when we
`vmsync`.
Also make sure to `daemon-reload` before restarting the daemon.
Closes: #803
Approved by: cgwalters
Conceptually: we're going to move rpm-ostree and ostree at the same
cadence most of the time; for both releases *and* for git master.
The problem so far has been the latter part. Reusing FAHC
for the build gets us half of the problem.
The other trick I realized we can do - just pull ostree out from the build
container. This avoids fetching it from the internet, and makes my workflow for
hacking on both nicer - I just `sudo make install` in my build container for
ostree.
It's tempting to make the whole thing symmetric and require `sudo make install`
for rpm-ostree and not do the insttree thing but...perhaps after.
Closes: #758
Approved by: jlebon
This is preparatory for future changes which will make use the newer sysroot
writing API. But in this change, we can drop all of our version ifdef'd code.
Closes: #740
Approved by: jlebon
I need to build ostree from git too. So now my workflow is:
```
export insttree=/srv/walters/tmp/rootfs
cd ostree
make && make install DESTDIR=${insttree}
cd rpm-ostree
make && make install DESTDIR=${insttree}
env VMCHECK_INSTTREE=${insttree} make vmoverlay
```
Closes: #705
Approved by: jlebon
1. Don't require an ssh-config
In the case of redhat-ci, the VMs are already fully configured for the
system (injected in the hosts file, host key accepted, etc...). So
there's no need to have an ssh-config there. In general, it should be
acceptable to run the vmcheck suite against a resolvable host without
having to create an ssh-config for it.
2. Make the host name configurable
Rather than hardcoding "vmcheck" as the hostname, allow overridding it
by specifying a VM env var directly. We also prepare the various scripts
to make use of the $VM variable whenever host-specific dirs/files are
created so that parallel runs won't step on each other.
Closes: #675
Approved by: cgwalters
The actual problem I am trying to fix with this is fallout from the
introduction of `/usr/libexec/rpm-ostreed`, which required a SELinux
policy change. Specifically for CentOS, the base policy is rev'd
slowly.
My hope was that by merging the daemon code back into `/usr/bin/rpm-ostree`
which is labeled `install_exec_t`, starting via systemd would do
the right thing. It turns out that doesn't happen.
Now later, I'm picking this patch back up because I want to do multprocessing in
the daemon (and in the core), and it makes sense to share code between them,
because multiprocessing will need to go through a re-exec path.
Another benefit is we avoid duplicated text (libglnx, internal helpers) between
the two binaries.
Closes: #292
Approved by: jlebon
I think since I landed a change to `--enable-new-name`, `/usr/bin/rpm-ostree`
became a symlink, and without the `-l` switch, rsync skips over them.
Hence, we have only been testing in vmcheck the old binaries, not new ones.
Oops.
Closes: #585
Approved by: jlebon
In the container build + vagrant test workflow, we have to run `make
vmsync` from the env in which autoconf was run, which is the container.
However, when using git worktrees (which is useful in this scenario to
avoid having to overwrite your local builds) and a CentOS build
container, the git inside is too old to understand worktrees, so let's
avoid invoking git in any of the test harness scripts.
Also make sure to restorecon after installing the new rpm-ostreed.
Closes: #555
Approved by: cgwalters
This is just the final bit required to make sure the vagrant and
non-vagrant paths can work happily together. It's mostly minor fixes,
though the most major change which also affects vagrant is that we now
sync to the root home dir, rather than ~vagrant.
Closes: #524
Approved by: cgwalters
My development environment is now using "pet" docker containers.
I use VMs for testing things that require that (like rpm-ostree).
This patch builds on work from @jlebon in
https://github.com/projectatomic/rpm-ostree/pull/509
to rework `vmcheck` such that it can work on any `ssh-config`. By
default we expect this to be Vagrant.
However, I go a lot farther and delete the `vmbuild` code that was
trying to do builds in a container on the target VM. I think this is
still worth pursuing at some point, but for now I think it's
reasonable to assume that the rpm-ostree developer audience uses Linux
as their host workstation and hence has containers.
(There's another important point here in that for developing lower
level things like rpm-ostree, there's a strong push to make the VM
disposable and not a pet)
Closes: #516
Approved by: jlebon
