IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now always based on an overlayfs:
f2773c1b55
This fixes a whole swath of problems with the previous design,
including the danger in replacing `/usr/lib/ostree-boot` which
broke booting for some people.
Further, we don't need to push a rollback deployment; the livefs
changes are always transient. So now we store livefs state
in `/run` instead of in the origin file.
Since we're doing a rewrite, it's now in Rust for much more safety.
We also always work in terms of incremental diffs between commits;
the previous huge hammer of swapping `/usr` was way too dangerous.
This command allows users to cheaply inject configuration files in the
initramfs stage without having to regenerate the whole initramfs (or
even a new OSTree commit). This will be useful for configuring services
involved in bringing up the root block device.
```
$ echo 'hello world' > /etc/foobar
$ rpm-ostree ex initramfs-etc --track /etc/foobar
Staging deployment... done
Run "systemctl reboot" to start a reboot
$ rpm-ostree status
State: idle
Deployments:
ostree://fedora:fedora/x86_64/coreos/testing-devel
Version: 32.20200716.dev.1 (2020-07-16T02:47:29Z)
Commit: 9a817d75bef81b955179be6e602d1e6ae350645b6323231a62ba2ee6e5b9644b
GPGSignature: (unsigned)
InitramfsEtc: /etc/foobar
● ostree://fedora:fedora/x86_64/coreos/testing-devel
Version: 32.20200716.dev.1 (2020-07-16T02:47:29Z)
Commit: 9a817d75bef81b955179be6e602d1e6ae350645b6323231a62ba2ee6e5b9644b
GPGSignature: (unsigned)
$ reboot
(boot into rd.break)
sh-5.0# cat /etc/foobar
hello world
```
See the libostree side of this at:
https://github.com/ostreedev/ostree/pull/2155
Lots more discussions in:
https://github.com/coreos/fedora-coreos-tracker/issues/94Closes: #1930
This starts bridging parts of the daemon syscore logic to Rust
plumbing, moving the livefs detection logic over there as a first
consumer. That was the simplest logic available for wiring, and
mostly meant as a sanity check.
Add a new `install/uninstall --idempotent` option to make it easier to
interact with the CLI through scripts. E.g. one doesn't have to check
first if a request has already been installed/uninstalled.
Closes: #1467Closes: #1478
Approved by: cgwalters
We're looking to embed an ostree commit inside a container image,
to make it easier to transport around with other images.
Conceptually here the host system is tracking a container (just
like for rojig we're tracking an RPM). This is the first step
towards making that support nicer; tooling can do
`rebase --custom-origin-url oscontainer://quay.io/exampleos@sha256:...`
and have that show up in `rpm-ostree status`.
There are two values, one intended to be machine readable (like
the `ostree://` and `rojig://` and one for humans which we
display when an admin types `rpm-ostree upgrade`.
This builds on prior work in
27bd7b97bb from #1396 .
Closes: #1406
Approved by: jlebon
This is one part of #1387 and is prep for a single higher level command
that makes it easier to remove all customizations (layering *and*
overrides).
Closes: #1408
Approved by: cgwalters
With the new support for pinning deployments, we need to also update
rpm-ostree to clean up the transient state as is now done in the ostree
sysroot upgrader.
This addresses that issue as well as tries to be a little cleaner in how
we clean up other transient state. Notably, we add a new helper function
to `RpmOstreeOrigin` to do this for us and use it in the upgrader. In
other cases, we do want this transient information since it allows us to
describe the deployment.
Closes: https://github.com/ostreedev/ostree/issues/1595Closes: #1372
Approved by: cgwalters
This renames the API functions in the core and origin, and also fixes up the
fact that we were still looking for `jigdo/` refs in the pruning code.
Closes: #1279
Approved by: jlebon
What's happened up till now is supporting `rojig://` in the same way as
`ostree://`. However, part of the high level goal here is to reduce
the need for system administrators to understand ostree.
This patch set starts to introduce some of the ideas for client-side
changes as part of jigdo ♲📦:
https://github.com/projectatomic/rpm-ostree/issues/1081#issuecomment-348540604
Concretely, we start using `${repo}:${nevra}` instead of `rojig://`.
(v2): Keep `Version` (plus timestamp) as a split out field for maximum visual aid.
Also, let's be opinionated here and entirely drop the `Commit` checksum by
default. I believe the Cockpit guys were right here - versions are for humans.
The fact that we have a checksum is powerful; and we still show it with `status
-v`. The way I think of it is: the checksum shows we're really an image system.
But we don't need to show it by default.
Closes: #1240
Approved by: jlebon
This fleshes out an important piece of the story, showing that
we can support history versioning the same way that we did with
ostree.
Also it's very useful for testing; I'm going to extend the suite after this to
deploy the previous version, clean everything up, then upgrade and verify we
only download changed RPMs.
Closes: #1232
Approved by: jlebon
This is an initial drop of support for:
`rpm-ostree rebase rojig://fahc:fedora-atomic-host`. We also
then support `rpm-ostree upgrade` from that.
There's a lot that could be improved here; the test coverage is relatively
minimal. A blocking issue there is having a realistic jigdo setup, and that's
going to require changing how we do testing. For now, this means that if we want
to e.g. change the format we'll have to temporarily disable this test, get the
format change in, update FAHC, then re-enable the test.
Closes: #1166
Approved by: jlebon
Add experimental support for replacing packages from the base layer with
local RPMs. This is useful for example, to cherry pick a fixed package,
or to roll back to a previous package version. Like with pkg removals,
only files in /usr are actually replaced.
This patch also contains a few usability improvements as well, e.g.
showing the full NEVRA of removed packages rather than just their names,
and support for resetting overrides using either the pkgname or NEVRA.
Closes: #852
Approved by: cgwalters
This is one more step towards making rpm-ostree more powerful in its
quest to be the ultimate *hybrid* image/package system. Package layering
allows us to add packages on top of the base package set received from
the content provider. However, we're not able to remove or replace
packages in the base set itself.
This patch introduces a new `override` command, which is for now nested
under the experimental `ex` command. The `override` command will allow
users to modify the base package set itself. The first implemented
subcommands are `remove` and `reset`.
A stub has been provided for the more useful `replace` subcommand,
though much of the needed logic for that operation are implemented in
this patch as part of the `remove` subcommand.
Part of: https://github.com/projectatomic/rpm-ostree/issues/485Closes: #797
Approved by: cgwalters
1. There's no point in passing a GCancellable in those cases. All the
manipulations should be short-lived.
2. Rename delete_packages to remove_packages, since "remove" is the
proper antonym of "add".
Closes: #819
Approved by: cgwalters
It's less cumbersome to check for this in the origin. Factor it out
there so that it's easier to modify it in the future.
Closes: #804
Approved by: cgwalters
There are a few different use cases here. First, for layering new packages,
there's no good reason for us to force a reboot. Second, we want some support
for cherry-picking security updates and allowing admins to restart services. Finally,
at some point we should offer support for entirely replacing the running tree
if that's what the user wants.
Until now we've been very conservative, but there's a spectrum here. In
particular, this patch changes things so we push a rollback before we start
doing anything live. I think in practice, many use cases would be totally fine
with doing most changes live, and falling back to the rollback if something went
wrong.
This initial code drop *only* supports live layering of new packages. However,
a lot of the base infrastructure is laid for future work.
For now, this will be classified as an experimental feature, hence `ex livefs`.
Part of: https://github.com/projectatomic/rpm-ostree/issues/639Closes: #652
Approved by: jlebon
Allow users to directly specify an RPM file on the command-line. The
"packages_added" array of the PkgChange() method can now contain
absolute paths to RPM files.
Grow the origin format to have a new "requested-local" key. This is
similar to the "requested" key, except that the packages are always
installed from cache. The "requested-local" array values also embed the
SHA-256 of the header we expect.
There is now a new "LocalPackages" line in the status. These packages
are a subset of the "packages" element (which are printed as
"LayeredPackages") and represent the packages that are explicitly marked
for installing from cache.
Interesting design choices/notes:
- Just as before, even with foo-1.0-1.x86_64 installed from RPM, a
user can still request "/usr/bin/foo": it will be made dormant. As
soon as foo stops being explicitly layered from the RPM, it will try
to fulfill the request by going to the repos. This allows users to
"pin" a layered package to a certain RPM, and then unpin it.
- The strings/NEVRAs in "requested" and "requested-local" are strictly
distinct. This allows us to be able to tell what the user means
exactly when they do "rpm-ostree uninstall".
Closes: #657
Approved by: cgwalters
This is the culmination of the work paved by the previous commits. We no
longer handle package set mutations in the upgrader, but rather let
clients modify the origin as needed for that. As such, the upgrader is
now completely memoryless. We no longer try to error out if a package is
already in the base and we no longer drop out packages previously
layered packages that are now in the base. *Which* packages actually get
layered is determined during deployment and not coded in the origin.
At an API level, the deployment variant returned (and thus what gets
printed by `status --json`) now has both "packages" and
"requested-packages". The former retains its original semantic: it's the
set of packages that are *actually* layered. The latter contains
everything from the origin, which includes the former set + dormant
packages.
Accordingly, the output of `rpm-ostree status` also now distinguishes
between "RequestedPackages" and "LayeredPackages". Extra: we now quote
provides that contain spaces.
Closes: #646
Approved by: cgwalters
Ideally, we want to parse out everything in the origin on init and then
cache the values to make it even easier to inspect it. We make this more
explicit by renaming the struct members to "cache_*" and also caching
the initramfs args. This doesn't actually save any allocations right
now (though it might in the future), but we do the same for everything
else, and it's nice to be consistent.
Closes: #646
Approved by: cgwalters
There are multiple reasons for this. The first is that with the
introduction of "dormant" packages, it becomes impossible from simply
looking at a deployment's origin whether it was layered or not. We
*could* make the upgrader turn around and insert back the "real" final
packages that were layered. But we're really trying to reinforce the
concept that the origin is mutable and represents an input for the
upgrader. Derived data shouldn't live there.
Whether a deployment is actually layered or not instead is determined by
the deployment commit itself. The embedded treespec records the exact
packages that were layered, which we will later use to enhance status
output.
Closes: #646
Approved by: cgwalters
This is a follow-up to 775c781 (#626). Really, RpmOstreeOrigin shouldn't
concern itself with whether the origin is unconfigured. Its main goal
should be to parse it out and make it easy for users to modify it. That
sort of business logic lives in the upgrader, which *should* be
concerned if the origin in unconfigured.
Closes: #634
Approved by: cgwalters
This is the beginning of a move towards making the upgrader more
stateless and less hysteretic. Ideally, the only input required should
be an origin file. Users of the upgrader are in charge of modifying the
origin as needed. The main goal of this is to simplify the upgrader
model and a better separation of concerns.
This was already done for the initramfs-related entries. This patch
formalises this for most of the other inputs, except packages, which
will be done soon.
Closes: #634
Approved by: cgwalters
Currently we push for a model where the initramfs is
generated (in non-hostonly mode), and merely replicated.
However, to support a few unfortunate corner cases like dm-multipath which wants
to inject a config file into the initramfs, we need to support regenerating it
client side too.
Down the line, we'll need this to support overriding the kernel too.
This changes things in the core to add the concept of an "empty"
`RpmOstreeContext`. I initially tried skipping it, but that was too much
duplication. We still want all of the core ostree-related logic that lives in
that code too.
The treespec bits barfed if the spec didn't have a `tree/packages` key. It was
simplest to change that to allow it - and because that was the only case where
we errored out in parsing, I dropped the error handling.
There was another place in the upgrader that now needed to be fixed to handle
transitioning from just regenerating initramfs to not.
Closes: #574
Approved by: jlebon
Working on initramfs, I hit a subtle issue with the fact that
I was trying to "redeploy", but with the origin file changed
during the process.
Previously, it was a bit unclear which parts of the upgrader logic are operating
on the *new* origin versus the "original origin".
The package layering code in the upgrader explicitly carries a delta on top in
the "add/remove" hash sets, which means it isn't visible to
`rpmostree_origin_is_locally_assembled()`.
Whereas for initramfs, I set a new origin. This broke things since we were
expecting to find a parent commit, but the original origin wasn't locally
assembled.
When looking more at this, I realized there's a far simpler model -
rather than keeping track of commit + origin, and using the origin
to try to determine whether or not the commit is layered, we can
keep track of `base_revision` and `final_revision`, and the latter
is only set if we're doing layering.
The diff speaks for itself here - a lot of fragile logic looking at the origin
drops away.
The next step here is probably to drop away the package layering hash sets, but
I'm trying to not change everything at once.
Closes: #579
Approved by: jlebon
In prep for adding "regenerates initramfs" to "is locally assembled",
we need more abstraction. I previously introduced a helper function, but
I'd still need to touch every call site when changing that.
Rather than having each caller re-parse the origin, let's parse it once into a
structure, and then have error-free accessors for it (that also don't malloc).
This way when adding a new flag, I don't need to touch every call site.
Notes:
- Some places in the code (like the deployments -> variant bits) tried to
handle deployments without an origin gracefully. That's no
longer true. I'm not sure how much we care - do we?
- There are a few places where I changed `packagelist.len() > 0` to
`is_locally_assembled()`. I think this is right, but we'll need
to be sure the "no packages to overlay, just initramfs" case
works when that lands.
Closes: #566
Approved by: jlebon
