rpm-ostree Developer Colin Walters walters@redhat.com rpm-ostree 1 rpm-ostree Operating system upgrade and software management tool rpm-ostree COMMAND OPTIONS rpm-ostree (also called "atomic" if configured) is a system software management tool that combines features of both traditional RPM and OSTree. It has support for both server-side composing of trees, as well as client-side upgrading and management of deployments. On an rpm-ostree managed system, the traditional yum (if installed) and rpm tools operate in a read-only state; the RPM database is stored in /usr/share/rpm which is underneath a read-only bind mount. Instead of live package-by-package upgrades, the underlying OSTree layer replicates a complete filesystem tree from a compose server into a new deployment, available on the next reboot. One benefit of this is that there will always be a previous deployment, available for rollback. Note in this "pure replication" model, at present there is no dependency resolution on the client machines, nor any ability to add or remove packages. You may however use /usr/local/bin, or an application mechanism such as docker 1 . compose Entrypoint for tree composition; most typically used on servers to prepare trees for replication by client systems. The tree subcommand processes a treefile, installs packages, and commits the result to an OSTree repository. There are also split commands install, postprocess, and commit. cancel Cancel a pending transaction. Exits successfully and does nothing if no transaction is running. Note that it is fully safe to cancel transactions such as upgrade in general. db Gives information pertaining to rpm data within the file system trees within the ostree commits. There are three sub-commands: diff to see how the packages are different between the trees in two commits. The --format=diff option uses - for removed packages, + for added packages, and finally ! for the old version of an updated package, with a following = for the new version. list to see which packages are within the commit(s) (works like yum list). At least one commit must be specified, but more than one or a range will also work. version to see the rpmdb version of the packages within the commit (works like yum version nogroups). At least one commit must be specified, but more than one or a range will also work. deploy Takes version, branch, or commit ID as an argument, and creates a new deployment using it, setting it up as the default for the next boot. Unlike most other commands, this will automatically fetch and traverse the origin history to find the target. By design, this has no effect on your running filesystem tree. You must reboot for any changes to take effect. In addition to exit status 0 for success and 1 for error, this command also uses exit status 77 to indicate that the system is already on the specified commit. This tristate return model is intended to support idempotency-oriented systems automation tools like Ansible. --reboot or -r to initiate a reboot after the upgrade is prepared. --preview download enough metadata to inspect the RPM diff, but do not actually create a new deployment. --cache-only or -C to perform the operation without trying to download the target tree from the remote nor the latest packages. --download-only to only download the target ostree and layered RPMs without actually performing the deployment. This can be used with a subsequent --cache-only invocation to perform the operation completely offline. install (pkg-add) Takes one or more packages as arguments. The packages are fetched from the enabled repositories in /etc/yum.repos.d/ and are overlayed on top of a new deployment. --reboot or -r to initiate a reboot after the deployment is prepared. --dry-run or -n to exit after printing the transaction rather than downloading the packages and creating a new deployment. --cache-only or -C to perform the operation without trying to download the latest packages. --download-only to only download the target layered RPMs without actually performing the deployment. This can be used with a subsequent --cache-only invocation to perform the operation completely offline. uninstall (pkg-remove) Takes one or more packages as arguments. The packages are removed from the set of packages that are currently overlayed. The remaining packages in the set (if any) are fetched from the enabled repositories in /etc/yum.repos.d/ and are overlayed on top of a new deployment. --reboot or -r to initiate a reboot after the deployment is prepared. --dry-run or -n to exit after printing the transaction rather than downloading the packages and creating a new deployment. override remove Remove a package from the base tree. Note that this is similar to layering in that the original base is retained. replace Replace a package in the base tree. reset Undo a remove or replace operation. rebase Switch to a different branch (possibly using a new remote), while preserving all of the state that upgrade does, such as /etc changes, any layered RPM packages, etc. The full syntax is rebase REMOTENAME:BRANCHNAME. Alternatively, you can use the --branch or --remote options mentioned below. With the argument syntax, specifying just BRANCHNAME will reuse the same remote. You may also omit one of REMOTENAME or BRANCHNAME (keeping the colon). In the former case, the branch refers to a local branch; in the latter case, the same branch will be used on a different remote. --branch or -b to to pick a branch name. --remote or -m to to pick a remote name. --cache-only or -C to perform the rebase without trying to download the target tree from the remote nor the latest packages. --download-only to only download the target ostree and layered RPMs without actually performing the deployment. This can be used with a subsequent --cache-only invocation to perform the operation completely offline. rollback OSTree manages an ordered list of bootloader entries, called "deployments". The entry at index 0 is the default bootloader entry. Each entry has a separate /etc, but they all share a single /var. You can use the bootloader to choose between entries by pressing Tab to interrupt startup. This command then changes the default bootloader entry. If the current default is booted, then set the default to the previous entry. Otherwise, make the currently booted tree the default. --reboot or -r to initiate a reboot after rollback is prepared. status Gives information pertaining to the current deployment in use. Lists the names and refspecs of all possible deployments in order, such that the first deployment in the list is the default upon boot. The deployment marked with * is the current booted deployment, and marking with 'r' indicates the most recent upgrade (the newest deployment version). upgrade Download the latest version of the current tree, and deploy it, setting it up as the default for the next boot. By design, this has no effect on your running filesystem tree. You must reboot for any changes to take effect. In addition to exit status 0 for success and 1 for error, this command also uses exit status 77 to indicate that no upgrade is available. --reboot or -r to initiate a reboot after upgrade is prepared. --allow-downgrade to permit deployment of chronologically older trees. --preview to download only /usr/share/rpm in order to do a package-level diff between the two versions. --check to just check if an upgrade is available, without downloading it or performing a package-level diff. --cache-only or -C to perform the upgrade without trying to download the latest tree from the remote nor the latest packages. --download-only to only download the target ostree and layered RPMs without actually performing the deployment. This can be used with a subsequent --cache-only invocation to perform the operation completely offline. refresh-md Download the latest rpm repo metadata if necessary and generate the cache. cleanup Commands such as upgrade create new deployments, which affect the next boot, and take up additional storage space. In some cases, you may want to undo and clean up these operations. This command supports both removing additional deployments such as the "pending" deployment (the next boot) as well as the default rollback deployment. Use -p/--pending to remove the pending deployment, and -r/--rollback to remove the rollback. The -b/--base option does not affect finished deployments, but will clean up any transient allocated space that may result from interrupted operations. If you want to free up disk space safely, use this option first. The -m/--repomd option cleans up cached RPM repodata and any partially downloaded (but not imported) packages. reload Some configuration and state data such as /etc/ostree/remotes.d changes may not be reflected until a daemon reload is invoked. Use this command to initiate a reload. initramfs By default, the primary use case mode for rpm-ostree is to replicate an initramfs as part of a base layer. However, some use cases require locally regenerating it to add configuration or drivers. Use rpm-ostree initramfs to inspect the current status. Use --enable to turn on client side initramfs regeneration. A new deployment will be generated, and after reboot, further upgrades will continue regenerating. You must reboot for the new initramfs to take effect. To append additional custom arguments to the initramfs program (currently dracut), use --arg. For example, --arg=-I --arg=/etc/someconfigfile. The --disable option will disable regeneration. You must reboot for the change to take effect. ex This command offers access to experimental features; command line stability is not guaranteed. The available subcommands will be listed by invoking rpm-ostree ex. For example, there is rpm-ostree ex livefs which is an experimental interface for applying changes to the booted deployment. ostree1, rpm8