IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The "show peers" output has become huge due to the dictionaries making it
less readable. Now this feature has reached a certain level of maturity
which doesn't warrant to dump it all the time, given that it was essentially
needed by developers. Let's make it optional, and disabled by default, only
when "show peers dict" is requested. The default output reminds about the
command. The output has been divided by 5 :
$ socat - /tmp/sock1 <<< "show peers dict" | wc -l
125
$ socat - /tmp/sock1 <<< "show peers" | wc -l
26
It could be useful to backport this to recent stable versions.
logical followup from cli commands addition, so that the state server
file stays compatible with the changes made at runtime; use previously
added helper to load server attributes.
also alloc a specific chunk to avoid mixing with other called functions
using it
Signed-off-by: William Dauchy <wdauchy@gmail.com>
this patch allows to set agent port at runtime. In order to align with
both `addr` and `check-addr` commands, also add the possibility to
optionnaly set port on `agent-addr` command. This led to a small
refactor in order to use the same function for both `agent-addr` and
`agent-port` commands.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
this patch allows to set server health check address at runtime. In
order to align with `addr` command, also allow to set port optionnaly.
This led to a small refactor in order to use the same function for both
`check-addr` and `check-port` commands.
for `check-port`, we however don't permit the change anymore if checks
are not enabled on the server.
This command becomes more and more useful for people having a consul
like architecture:
- the backend server is located on a container with its own IP
- the health checks are done the consul instance located on the host
with the host IP
Signed-off-by: William Dauchy <wdauchy@gmail.com>
We can currently change the check-port using the cli command `set server
check-port` but there is a consistency issue when using server state.
This patch aims to fix this problem but will be also a good preparation
work to get rid of checkport flag, so we are able to know when checkport
was set by config.
I am fully aware this is not making github #953 moving forward, I
however think this might be acceptable while waiting for a proper
solution and resolve consistency problem faced with port settings.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
This finally adds the long-awaited solution to inspect the run queues
and figure what is eating the CPU or causing latencies. We can even see
the experienced latencies when profiling is enabled. Example on a
saturated process:
> show tasks
Running tasks: 14983 (4 threads)
function places % lat_tot lat_avg
process_stream 4948 33.0 5.840m 70.82ms
h1_io_cb 2535 16.9 - -
main+0x9e670 2508 16.7 2.930m 70.10ms
ssl_sock_io_cb 2499 16.6 - -
si_cs_io_cb 2493 16.6 - -
If a user enables profiling by hand, it makes sense to reset the stats
counters to provide fresh new measurements. Therefore it's worth using
this as the standard method to reset counters.
"show profiling" will now dump the stats collected by the scheduler if
profiling was previously enabled. This will immediately make it obvious
what functions are responsible for others' high latencies or which ones
are suffering from others, and should help spot issues like undesired
wakeups.
Example:
Per-task CPU profiling : on # set profiling tasks {on|auto|off}
Tasks activity:
function calls cpu_tot cpu_avg lat_tot lat_avg
si_cs_io_cb 5569479 23.37s 4.196us - -
h1_io_cb 5558654 13.60s 2.446us - -
process_stream 250841 1.476s 5.882us 3.499s 13.95us
main+0x9e670 198 - - 5.526ms 27.91us
task_run_applet 17 1.509ms 88.77us 205.8us 12.11us
srv_cleanup_idle_connections 12 44.51us 3.708us 25.71us 2.142us
main+0x158c80 9 48.72us 5.413us - -
srv_cleanup_toremove_connections 5 165.1us 33.02us 123.6us 24.72us
Now the show_fd helpers at the transport and mux levels return an integer
which indicates whether or not the inspected entry looks suspicious. When
an entry is reported as suspicious, "show fd" will suffix it with an
exclamation mark ('!') in the dump, that is supposed to help detecting
them.
For now, helpers were adjusted to adapt to the new API but none of them
reports any suspicious entry yet.
The duplicated entries (in case of vary) were not taken into account by
the "show cache" command. They are now dumped too.
A new "vary" column is added to the output. It contains the complete
seocndary key (in hex format).
in the context of a progressive backend migration, we want to be able to
activate SSL on outgoing connections to the server at runtime without
reloading.
This patch adds a `set server ssl` command; in order to allow that:
- add `srv_use_ssl` to `show servers state` command for compatibility,
also update associated parsing
- when using default-server ssl setting, and `no-ssl` on server line,
init SSL ctx without activating it
- when triggering ssl API, de/activate SSL connections as requested
- clean ongoing connections as it is done for addr/port changes, without
checking prior server state
example config:
backend be_foo
default-server ssl
server srv0 127.0.0.1:6011 weight 1 no-ssl
show servers state:
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - -1
where srv0 can switch to ssl later during the runtime:
set server be_foo/srv0 ssl on
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - 1
Also update existing tests and create a new one.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Released version 2.4-dev0 with the following main changes :
- MINOR: version: it's development again.
- DOC: mention in INSTALL that it's development again
Within management.txt, proxy was listed as the only available option. "dns"
is now supported so let's add that. This change also updates the command to list
the available options <dns|proxy> for "domain" as previously it only specified
<domain>, which could be confusing as a user may think this field accepts
dynamic options when it actually requires a specific keyword.
The "weight" column on the stats page is somewhat confusing when using
slowstart becaue it reports the effective weight, without being really
explicit about it. In some situations the user-configured weight is more
relevant (especially with long slowstarts where it's important to know
if the configured weight is correct).
This adds a new uweight stat which reports a server's user-configured
weight, and in a backend it receives the sum of all servers' uweights.
In addition it adds the mention of "effective" in a few descriptions
for the "weight" column (help and doc).
As a result, the list of servers in a backend is now always scanned
when dumping the stats. But this is not a problem given that these
servers are already scanned anyway and for way heavier processing.
By mistake I added the "up" then "maint" output modifiers to the "show info"
block instead of the "show stat" one in the two previous commits 65141ffc4
("MINOR: stats: support the "up" output modifier for "show stat"") and
3e3203670 ("MINOR: stats: also support a "no-maint" show stat modifier").
No backport is needed.
"no-maint" is a bit similar to "up" except that it will only hide
servers that are in maintenance (or disabled in the configuration), and
not those that are enabled but failed a check. One benefit here is to
significantly reduce the output of the "show stat" command when using
large server-templates containing entries that are not yet provisioned.
Note that the prometheus exporter also has such an option which does
the exact same.
We already had it on the HTTP interface but it was not accessible on the
CLI. It can be very convenient to hide servers which are down, do not
resolve, or are in maintenance.
This one was scheduled for removal in 2.3 since 2.2-dev3 by commit
1b85785bc ("MINOR: config: mark global.debug as deprecated"). Let's
remove it now. It remains totally possible to use -d on the command
line though.
Use the new stats module API to integrate the dns counters in the
standard stats. This is done in order to avoid code duplication, keep
the code related to cli out of dns and use the full possibility of the
stats function, allowing to print dns stats in csv or json format.
Use the character '-' to mark the end of static statistics on proxy
domain. After this marker, the order of the fields is not guaranteed and
should be parsed with care.
The domain option will be used to have statistics attached to other
objects than proxies/listeners/servers. At the moment, only the PROXY
domain is available.
Add an argument 'domain' on the 'show stats' cli command to specify the
domain. Only 'domain proxy' is available now. If not specified, proxy
will be considered the default domain.
For HTML output, only proxy statistics will be displayed.
Update the documentation with the new bundle behavior which does not use
the same OpenSSL certificate store anymore but loads the PEM separately
as multiple "crt" were specified.
It should fix issue #872.
especially when starting to use `new ssl cert` runtime API, it might
become a bit confusing for users to mix bundle and single cert,
especially when it comes to use the commit command:
e.g.:
- start the process with `crt` loading a bundle
- use `set ssl cert my_cert.pem.ecdsa`: API detects it as a replacement
of a bundle.
- `commit` has to be done on the bundle: `commit ssl cert my_cert.pem`
however:
- add a new cert: `new ssl cert my_cert.pem.rsa`: added as a single
certificate
- `commit` has to be done on the certificate: `commit ssl cert
my_cert.pem.rsa`
this should resolve github issue #872
this should probably be backported in >= v2.2 in order to encourage
people to move away from bundle certificates loading.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
This command reuses the existing "show servers state" to also dump the
state of active and idle connections. The main use is to serve as a
debugging tool to troubleshot connection reuse issues.
"show sess" and particularly "show sess all" can be very slow when dumping
lots of information, and while dumping, new sessions might appear, making
the output really endless. When threads are used, this causes a double
problem:
- all threads are paused during the dump, so an overly long dump degrades
the quality of service ;
- since all threads are paused, more events get postponed, possibly
resulting in more streams to be dumped on next invocation of the dump
function.
This patch addresses this long-lasting issue by doing something simple:
the CLI's stream is moved at the end of the steams list, serving as an
identifiable marker to end the dump, because all entries past it were
added after the command was entered. As a result, the CLI's stream always
appears as the last one.
It may make sense to backport this to stable branches where dumping live
streams is difficult as well.
Since some systems switched to service managers which hide all warnings
by default, some users are not aware of some possibly important warnings
and get caught too late with errors that could have been detected earlier.
This patch adds a new global keyword, "zero-warning" and an equivalent
command-line option "-dW" to refuse to start in case any warning is
detected. It is recommended to use these with configurations that are
managed by humans in order to catch mistakes very early.
This helps quickly checking if the config produces any warning. For
this we reuse the "warned" bit field to add a new WARN_ANY bit that is
set by ha_warning(). The rest of the bit field was also cleaned from
unused bits.
Delete a certificate store from HAProxy and free its memory. The
certificate must be unused and removed from any crt-list or directory.
The deletion doesn't work with a certificate referenced directly with
the "crt" directive in the configuration.
The dump and show ssl crt-list commands does the same thing, they dump
the content of a crt-list, but the 'show' displays an ID in the first
column. Delete the 'dump' command so it is replaced by the 'show' one.
The old 'show' command is replaced by an '-n' option to dump the ID.
And the ID which was a pointer is replaced by a line number and placed
after colons in the filename.
Example:
$ echo "show ssl crt-list -n kikyo.crt-list" | socat /tmp/sock1 -
# kikyo.crt-list
kikyo.pem.rsa:1 secure.domain.tld
kikyo.pem.ecdsa:2 secure.domain.tld
Delete an entry in a crt-list, this is done by iterating over the
ckch_inst in the crtlist_entry. For each ckch_inst the bind_conf lock is
held during the deletion of the sni_ctx in the SNI trees. Everything
is free'd.
If there is several entries with the same certificate, a line number
must be provided to chose with entry delete.
For complex stick tables with many entries/columns, it can be beneficial
to filter using multiple criteria. The maximum number of filter entries
can be controlled by defining STKTABLE_FILTER_LEN during build time.
This patch can be backported to older releases.
The stats field ST_F_EINT has been added to report internal errors encountered
per proxy, per listener and per server. It appears in the CLI export and on the
HTML stats page.
Instead of relying on DEBUG_DEV for most debugging commands, which is
limiting, let's condition them to expert mode. Only one ("debug dev exec")
remains conditionned to DEBUG_DEV because it can have a security implication
on the system. The commands are not listed unless "expert-mode on" was first
entered on the CLI :
> expert-mode on
> help
debug dev close <fd> : close this file descriptor
debug dev delay [ms] : sleep this long
debug dev exec [cmd] ... : show this command's output
debug dev exit [code] : immediately exit the process
debug dev hex <addr> [len]: dump a memory area
debug dev log [msg] ... : send this msg to global logs
debug dev loop [ms] : loop this long
debug dev panic : immediately trigger a panic
debug dev stream ... : show/manipulate stream flags
debug dev tkill [thr] [sig] : send signal to thread
> debug dev stream
Usage: debug dev stream { <obj> <op> <value> | wake }*
<obj> = {strm | strm.f | sif.f | sif.s | sif.x | sib.f | sib.s | sib.x |
txn.f | req.f | req.r | req.w | res.f | res.r | res.w}
<op> = {'' (show) | '=' (assign) | '^' (xor) | '+' (or) | '-' (andnot)}
<value> = 'now' | 64-bit dec/hex integer (0x prefix supported)
'wake' wakes the stream asssigned to 'strm' (default: current)
Some commands like the debug ones are not enabled by default but can be
useful on some production environments. In order to avoid the temptation
of using them incorrectly, let's introduce an "expert" mode for a CLI
connection, which allows some commands to appear and be used. It is
enabled by command "expert-mode on" which is not listed by default.
Now "show info" supports "desc" after the default and "typed" formats,
and "show stat" supports this after the typed format. In both cases
this appends the description for the represented metric between double
quotes. The same could be done for JSON output but would possibly require
to update the schema first.
