IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
I've been facing multiple configurations which involved track-sc* rules
in tcp-request content without the "if ..." to force it to wait for the
contents, resulting in random behaviour with contents sometimes retrieved
and sometimes not.
Reading the doc doesn't make it clear either that the tracking will be
performed only if data are already there and that waiting on an ACL is
the only way to avoid this.
Since this behaviour is not natural and we now have the ability to fix
it, this patch ensures that if input data are still moving, instead of
silently dropping them, we naturally wait for them to stabilize up to
the inspect-delay. This way it's not needed anymore to implement an
ACL-based condition to force to wait for data, eventhough the behaviour
is not changed for when an ACL is present.
The most obvious usage will be when track-sc is followed by any HTTP
sample expression, there's no need anymore for adding "if HTTP".
It's probably worth backporting this to 1.5 to avoid further configuration
issues. Note that it requires previous patch.
stktable_fetch_key() does not indicate whether it returns NULL because
the input sample was not found or because it's unstable. It causes trouble
with track-sc* rules. Just like with sample_fetch_string(), we want it to
be able to give more information to the caller about what it found. Thus,
now we use the pointer to a sample passed by the caller, and fill it with
the information we have about the sample. That way, even if we return NULL,
the caller has the ability to check whether a sample was found and if it is
still changing or not.
This new directive captures the specified fetch expression, converts
it to text and puts it into the next capture slot. The capture slots
are shared with header captures so that it is possible to dump all
captures at once or selectively in logs and header processing.
The purpose is to permit logs to contain whatever payload is found in
a request, for example bytes at a fixed location or the SNI of forwarded
SSL traffic.
We used to have is_addr() in place to validate sometimes the existence
of an address, sometimes a valid IPv4 or IPv6 address. Replace them
carefully so that is_inet_addr() is used wherever we can only use an
IPv4/IPv6 address.
Lets set IP_FREEBIND on IPv6 sockets as well, this works since Linux 3.3
and doesn't require CAP_NET_ADMIN privileges (IPV6_TRANSPARENT does).
This allows unprivileged users to bind to non-local IPv6 addresses, which
can be useful when setting up the listening sockets or when connecting
to backend servers with a specific, non-local source IPv6 address (at that
point we usually dropped root privileges already).
Till now, we had one flag per stick counter to indicate if it was
tracked in a backend or in a frontend. We just had to add another
flag per stick-counter to indicate if it relies on contents or just
connection. These flags are quite painful to maintain and tend to
easily conflict with other flags if their number is changed.
The correct solution consists in moving the flags to the stkctr struct
itself, but currently this struct is made of 2 pointers, so adding a
new entry there to store only two bits will cause at least 16 more bytes
to be eaten per counter due to alignment issues, and we definitely don't
want to waste tens to hundreds of bytes per session just for things that
most users don't use.
Since we only need to store two bits per counter, an intermediate
solution consists in replacing the entry pointer with a composite
value made of the original entry pointer and the two flags in the
2 unused lower bits. If later a need for other flags arises, we'll
have to store them in the struct.
A few inline functions have been added to abstract the retrieval
and assignment of the pointers and flags, resulting in very few
changes. That way there is no more dependence on the number of
stick-counters and their position in the session flags.
One year ago, commit 5d5b5d8 ("MEDIUM: proto_tcp: add support for tracking
L7 information") brought support for tracking L7 information in tcp-request
content rules. Two years earlier, commit 0a4838c ("[MEDIUM] session-counters:
correctly unbind the counters tracked by the backend") used to flush the
backend counters after processing a request.
While that earliest patch was correct at the time, it became wrong after
the second patch was merged. The code does what it says, but the concept
is flawed. "TCP request content" rules are evaluated for each HTTP request
over a single connection. So if such a rule in the frontend decides to
track any L7 information or to track L4 information when an L7 condition
matches, then it is applied to all requests over the same connection even
if they don't match. This means that a rule such as :
tcp-request content track-sc0 src if { path /index.html }
will count one request for index.html, and another one for each of the
objects present on this page that are fetched over the same connection
which sent the initial matching request.
Worse, it is possible to make the code do stupid things by using multiple
counters:
tcp-request content track-sc0 src if { path /foo }
tcp-request content track-sc1 src if { path /bar }
Just sending two requests first, one with /foo, one with /bar, shows
twice the number of requests for all subsequent requests. Just because
both of them persist after the end of the request.
So the decision to flush backend-tracked counters was not the correct
one. In practice, what is important is to flush countent-based rules
since they are the ones evaluated for each request.
Doing so requires new flags in the session however, to keep track of
which stick-counter was tracked by what ruleset. A later change might
make this easier to maintain over time.
This bug is 1.5-specific, no backport to stable is needed.
It's easier and safer to rely on conn_ctrl_ready() everywhere than to
check the flag itself. It will also simplify adding extra checks later
if needed. Some useless controls for !ctrl have been removed, as the
CTRL_READY flag itself guarantees ctrl is set.
The recv/send callbacks must check for readiness themselves instead of
having their callers do it. This will strengthen the test and will also
ensure we never refrain from calling a handshake handler because a
direction is being polled while the other one is ready.
We simply remove these functions and replace their calls with the
appropriate ones :
- if we're in the data phase, we can simply report wait on the FD
- if we're in the socket phase, we may also have to signal the
desire to read/write on the socket because it might not be
active yet.
This commit heavily changes the polling system in order to definitely
fix the frequent breakage of SSL which needs to remember the last
EAGAIN before deciding whether to poll or not. Now we have a state per
direction for each FD, as opposed to a previous and current state
previously. An FD can have up to 8 different states for each direction,
each of which being the result of a 3-bit combination. These 3 bits
indicate a wish to access the FD, the readiness of the FD and the
subscription of the FD to the polling system.
This means that it will now be possible to remember the state of a
file descriptor across disable/enable sequences that generally happen
during forwarding, where enabling reading on a previously disabled FD
would result in forgetting the EAGAIN flag it met last time.
Several new state manipulation functions have been introduced or
adapted :
- fd_want_{recv,send} : enable receiving/sending on the FD regardless
of its state (sets the ACTIVE flag) ;
- fd_stop_{recv,send} : stop receiving/sending on the FD regardless
of its state (clears the ACTIVE flag) ;
- fd_cant_{recv,send} : report a failure to receive/send on the FD
corresponding to EAGAIN (clears the READY flag) ;
- fd_may_{recv,send} : report the ability to receive/send on the FD
as reported by poll() (sets the READY flag) ;
Some functions are used to report the current FD status :
- fd_{recv,send}_active
- fd_{recv,send}_ready
- fd_{recv,send}_polled
Some functions were removed :
- fd_ev_clr(), fd_ev_set(), fd_ev_rem(), fd_ev_wai()
The POLLHUP/POLLERR flags are now reported as ready so that the I/O layers
knows it can try to access the file descriptor to get this information.
In order to simplify the conditions to add/remove cache entries, a new
function fd_alloc_or_release_cache_entry() was created to be used from
pollers while scanning for updates.
The following pollers have been updated :
ev_select() : done, built, tested on Linux 3.10
ev_poll() : done, built, tested on Linux 3.10
ev_epoll() : done, built, tested on Linux 3.10 & 3.13
ev_kqueue() : done, built, tested on OpenBSD 5.2
Now when a connection error happens, it is reported in the connection
so that upper layers know exactly what happened. This is particularly
useful with health checks and resources exhaustion.
When an incoming shutdown or error is detected, we know that we
can safely close without disabling lingering. Do it in tcp_drain()
so that we don't have to do it from each and every caller.
It was not possible to know if the drain() function had hit an
EAGAIN, so now we change the API of this function to return :
< 0 if EAGAIN was met
= 0 if some data remain
> 0 if a shutdown was received
Right now we see many places doing their own setsockopt(SO_LINGER).
Better only do it just before the close() in fd_delete(). For this
we add a new flag on the file descriptor, indicating if it's safe or
not to linger. If not (eg: after a connect()), then the setsockopt()
call is automatically performed before a close().
The flag automatically turns to safe when receiving a read0.
Doing so ensures that we're consistent between all the functions in the whole
chain. This is important so that we can extract the argument parsing from this
function.
We used to have two very similar functions for sending a PROXY protocol
line header. The reason is that the default one relies on the stream
interface to retrieve the other end's address, while the "local" one
performs a local address lookup and sends that instead (used by health
checks).
Now that the send_proxy_ofs is stored in the connection and not the
stream interface, we can make the local_send_proxy rely on it and
support partial sends. This also simplifies the code by removing the
local_send_proxy function, making health checks use send_proxy_ofs,
resulting in the removal of the CO_FL_LOCAL_SPROXY flag, and the
associated test in the connection handler. The other flag,
CO_FL_SI_SEND_PROXY was renamed without the "SI" part so that it
is clear that it is not dedicated anymore to a usage with a stream
interface.
Currently the control and transport layers of a connection are supposed
to be initialized when their respective pointers are not NULL. This will
not work anymore when we plan to reuse connections, because there is an
asymmetry between the accept() side and the connect() side :
- on accept() side, the fd is set first, then the ctrl layer then the
transport layer ; upon error, they must be undone in the reverse order,
then the FD must be closed. The FD must not be deleted if the control
layer was not yet initialized ;
- on the connect() side, the fd is set last and there is no reliable way
to know if it has been initialized or not. In practice it's initialized
to -1 first but this is hackish and supposes that local FDs only will
be used forever. Also, there are even less solutions for keeping trace
of the transport layer's state.
Also it is possible to support delayed close() when something (eg: logs)
tracks some information requiring the transport and/or control layers,
making it even more difficult to clean them.
So the proposed solution is to add two flags to the connection :
- CO_FL_CTRL_READY is set when the control layer is initialized (fd_insert)
and cleared after it's released (fd_delete).
- CO_FL_XPRT_READY is set when the control layer is initialized (xprt->init)
and cleared after it's released (xprt->close).
The functions have been adapted to rely on this and not on the pointers
anymore. conn_xprt_close() was unused and dangerous : it did not close
the control layer (eg: the socket itself) but still marks the transport
layer as closed, preventing any future call to conn_full_close() from
finishing the job.
The problem comes from conn_full_close() in fact. It needs to close the
xprt and ctrl layers independantly. After that we're still having an issue :
we don't know based on ->ctrl alone whether the fd was registered or not.
For this we use the two new flags CO_FL_XPRT_READY and CO_FL_CTRL_READY. We
now rely on this and not on conn->xprt nor conn->ctrl anymore to decide what
remains to be done on the connection.
In order not to miss some flag assignments, we introduce conn_ctrl_init()
to initialize the control layer, register the fd using fd_insert() and set
the flag, and conn_ctrl_close() which unregisters the fd and removes the
flag, but only if the transport layer was closed.
Similarly, at the transport layer, conn_xprt_init() calls ->init and sets
the flag, while conn_xprt_close() checks the flag, calls ->close and clears
the flag, regardless xprt_ctx or xprt_st. This also ensures that the ->init
and the ->close functions are called only once each and in the correct order.
Note that conn_xprt_close() does nothing if the transport layer is still
tracked.
conn_full_close() now simply calls conn_xprt_close() then conn_full_close()
in turn, which do nothing if CO_FL_XPRT_TRACKED is set.
In order to handle the error path, we also provide conn_force_close() which
ignores CO_FL_XPRT_TRACKED and closes the transport and the control layers
in turns. All relevant instances of fd_delete() have been replaced with
conn_force_close(). Now we always know what state the connection is in and
we can expect to split its initialization.
The connection will only remain there as a pre-allocated entity whose
goal is to be placed in ->end when establishing an outgoing connection.
All connection initialization can be made on this connection, but all
information retrieved should be applied to the end point only.
This change is huge because there were many users of si->conn. Now the
only users are those who initialize the new connection. The difficulty
appears in a few places such as backend.c, proto_http.c, peers.c where
si->conn is used to hold the connection's target address before assigning
the connection to the stream interface. This is why we have to keep
si->conn for now. A future improvement might consist in dynamically
allocating the connection when it is needed.
When we get a hard error from a syscall indicating the socket is dead,
it makes sense to set the CO_FL_SOCK_WR_SH and CO_FL_SOCK_RD_SH flags
to indicate that the socket may not be used anymore. It will ease the
error processing in health checks where the state of socket is very
important. We'll also be able to avoid some setsockopt(nolinger) after
an error.
For now, the rest of the code is not impacted because CO_FL_ERROR is
always tested prior to these flags.
The tcp_connect_probe() function may be called upon I/O activity when
no recv/send callbacks were called (eg: recv not possible, nothing to
send). It only relies on connect() to observe the connection establishment
progress but that does not work when some network errors are pending on
the socket (eg: a delayed connection refused).
For this reason we need to run a getsockopt() in the case where the
poller reports FD_POLL_ERR on the socket. We use this opportunity to
update errno so that the conn->data->wake() function has all relevant
info when it sees CO_FL_ERROR.
At the moment no code is impacted by this bug because recv polling is
always enabled during a connect, so recvfrom() always sees the error
first. But this may change with the health check cleanup.
No backport is needed.
We now have the following enums and all related functions return them and
consume them :
enum pat_match_res {
PAT_NOMATCH = 0, /* sample didn't match any pattern */
PAT_MATCH = 3, /* sample matched at least one pattern */
};
enum acl_test_res {
ACL_TEST_FAIL = 0, /* test failed */
ACL_TEST_MISS = 1, /* test may pass with more info */
ACL_TEST_PASS = 3, /* test passed */
};
enum acl_cond_pol {
ACL_COND_NONE, /* no polarity set yet */
ACL_COND_IF, /* positive condition (after 'if') */
ACL_COND_UNLESS, /* negative condition (after 'unless') */
};
It's just in order to avoid doubts when reading some code.
This patch just renames functions, types and enums. No code was changed.
A significant number of files were touched, especially the ACL arrays,
so it is likely that some external patches will not apply anymore.
One important thing is that we had to split ACL_PAT_* into two groups :
- ACL_TEST_{PASS|MISS|FAIL}
- PAT_{MATCH|UNMATCH}
A future patch will enforce enums on all these places to avoid confusion.
The track-sc* tcp rules are bogus. The test to verify if the
tracked counter was already assigned is performed in the same
condition as the test for the action. The effect is that a
rule which tracks a counter that is already being tracked
is implicitly converted to an accept because the default
rule is an accept.
This bug only affects 1.5-dev releases.
This new action immediately closes the connection with the server
when the condition is met. The first such rule executed ends the
rules evaluation. The main purpose of this action is to force a
connection to be finished between a client and a server after an
exchange when the application protocol expects some long time outs
to elapse first. The goal is to eliminate idle connections which
take signifiant resources on servers with certain protocols.
In preparation of more flexibility in the stick counters, make their
number configurable. It still defaults to 3 which is the minimum
accepted value. Changing the value alone is not sufficient to get
more counters, some bitfields still need to be updated and the TCP
actions need to be updated as well, but this update tries to be
easier, which is nice for experimentation purposes.
We're having a lot of duplicate code just because of minor variants between
fetch functions that could be dealt with if the functions had the pointer to
the original keyword, so let's pass it as the last argument. An earlier
version used to pass a pointer to the sample_fetch element, but this is not
the best solution for two reasons :
- fetch functions will solely rely on the keyword string
- some other smp_fetch_* users do not have the pointer to the original
keyword and were forced to pass NULL.
So finally we're passing a pointer to the keyword as a const char *, which
perfectly fits the original purpose.
Benoit Dolez reported a failure to start haproxy 1.5-dev19. The
process would immediately report an internal error with missing
fetches from some crap instead of ACL names.
The cause is that some versions of gcc seem to trim static structs
containing a variable array when moving them to BSS, and only keep
the fixed size, which is just a list head for all ACL and sample
fetch keywords. This was confirmed at least with gcc 3.4.6. And we
can't move these structs to const because they contain a list element
which is needed to link all of them together during the parsing.
The bug indeed appeared with 1.5-dev19 because it's the first one
to have some empty ACL keyword lists.
One solution is to impose -fno-zero-initialized-in-bss to everyone
but this is not really nice. Another solution consists in ensuring
the struct is never empty so that it does not move there. The easy
solution consists in having a non-null list head since it's not yet
initialized.
A new "ILH" list head type was thus created for this purpose : create
an Initialized List Head so that gcc cannot move the struct to BSS.
This fixes the issue for this version of gcc and does not create any
burden for the declarations.
It was a bit inconsistent to have gpc start at 0 and sc start at 1,
so make sc start at zero like gpc. No previous release was issued
with sc3 anyway, so no existing setup should be affected.
This configures the client-facing connection to receive a PROXY protocol
header before any byte is read from the socket. This is equivalent to
having the "accept-proxy" keyword on the "bind" line, except that using
the TCP rule allows the PROXY protocol to be accepted only for certain
IP address ranges using an ACL. This is convenient when multiple layers
of load balancers are passed through by traffic coming from public
hosts.
Since commit cfd97c6f was merged into 1.5-dev14 (BUG/MEDIUM: checks:
prevent TIME_WAITs from appearing also on timeouts), some valid health
checks sometimes used to show some TCP resets. For example, this HTTP
health check sent to a local server :
19:55:15.742818 IP 127.0.0.1.16568 > 127.0.0.1.8000: S 3355859679:3355859679(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:15.742841 IP 127.0.0.1.8000 > 127.0.0.1.16568: S 1060952566:1060952566(0) ack 3355859680 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:15.742863 IP 127.0.0.1.16568 > 127.0.0.1.8000: . ack 1 win 257
19:55:15.745402 IP 127.0.0.1.16568 > 127.0.0.1.8000: P 1:23(22) ack 1 win 257
19:55:15.745488 IP 127.0.0.1.8000 > 127.0.0.1.16568: FP 1:146(145) ack 23 win 257
19:55:15.747109 IP 127.0.0.1.16568 > 127.0.0.1.8000: R 23:23(0) ack 147 win 257
After some discussion with Chris Huang-Leaver, it appeared clear that
what we want is to only send the RST when we have no other choice, which
means when the server has not closed. So we still keep SYN/SYN-ACK/RST
for pure TCP checks, but don't want to see an RST emitted as above when
the server has already sent the FIN.
The solution against this consists in implementing a "drain" function at
the protocol layer, which, when defined, causes as much as possible of
the input socket buffer to be flushed to make recv() return zero so that
we know that the server's FIN was received and ACKed. On Linux, we can make
use of MSG_TRUNC on TCP sockets, which has the benefit of draining everything
at once without even copying data. On other platforms, we read up to one
buffer of data before the close. If recv() manages to get the final zero,
we don't disable lingering. Same for hard errors. Otherwise we do.
In practice, on HTTP health checks we generally find that the close was
pending and is returned upon first recv() call. The network trace becomes
cleaner :
19:55:23.650621 IP 127.0.0.1.16561 > 127.0.0.1.8000: S 3982804816:3982804816(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:23.650644 IP 127.0.0.1.8000 > 127.0.0.1.16561: S 4082139313:4082139313(0) ack 3982804817 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:23.650666 IP 127.0.0.1.16561 > 127.0.0.1.8000: . ack 1 win 257
19:55:23.651615 IP 127.0.0.1.16561 > 127.0.0.1.8000: P 1:23(22) ack 1 win 257
19:55:23.651696 IP 127.0.0.1.8000 > 127.0.0.1.16561: FP 1:146(145) ack 23 win 257
19:55:23.652628 IP 127.0.0.1.16561 > 127.0.0.1.8000: F 23:23(0) ack 147 win 257
19:55:23.652655 IP 127.0.0.1.8000 > 127.0.0.1.16561: . ack 24 win 257
This change should be backported to 1.4 which is where Chris encountered
this issue. The code is different, so probably the tcp_drain() function
will have to be put in the checks only.
We're often missin a third counter to track base, src and base+src at
the same time. Here we introduce track_sc3 to have this third counter.
It would be wise not to add much more counters because that slightly
increases the session size and processing time though the real issue
is more the declaration of the keywords in the code and in the doc.
By properly affecting the flags and values, it becomes easier to add
more tracked counters, for example for experimentation. It also slightly
reduces the code and the number of tests. No counters were added with
this patch.
FreeBSD uses (IPPROTO_IP, IP_BINDANY) and (IPPROTO_IPV6, IPV6_BINDANY)
to enable transparent proxy on a socket.
This patch adds support for the relevant setsockopt() calls.
This patch does not change the logic of the code, it only changes the
way OS-specific defines are tested.
At the moment the transparent proxy code heavily depends on Linux-specific
defines. This first patch introduces a new define "CONFIG_HAP_TRANSPARENT"
which is set every time the defines used by transparent proxy are present.
This also means that with an up-to-date libc, it should not be necessary
anymore to force CONFIG_HAP_LINUX_TPROXY during the build, as the flags
will automatically be detected.
The CTTPROXY flags still remain separate because this older API doesn't
work the same way.
A new line has been added in the version output for haproxy -vv to indicate
what transparent proxy support is available.
While ACL args were resolved after all the config was parsed, it was not the
case with sample fetch args because they're almost everywhere now.
The issue is that ACLs now solely rely on sample fetches, so their args
resolving doesn't work anymore. And many fetches involving a server, a
proxy or a userlist don't work at all.
The real issue is that at the bottom layers we have no information about
proxies, line numbers, even ACLs in order to report understandable errors,
and that at the top layers we have no visibility over the locations where
fetches are referenced (think log node).
After failing multiple unsatisfying solutions attempts, we now have a new
concept of args list. The principle is that every proxy has a list head
which contains a number of indications such as the config keyword, the
context where it's used, the file and line number, etc... and a list of
arguments. This list head is of the same type as the elements, so it
serves as a template for adding new elements. This way, it is filled from
top to bottom by the callers with the information they have (eg: line
numbers, ACL name, ...) and the lower layers just have to duplicate it and
add an element when they face an argument they cannot resolve yet.
Then at the end of the configuration parsing, a loop passes over each
proxy's list and resolves all the args in sequence. And this way there is
all necessary information to report verbose errors.
The first immediate benefit is that for the first time we got very precise
location of issues (arg number in a keyword in its context, ...). Second,
in order to do this we had to parse log-format and unique-id-format a bit
earlier, so that was a great opportunity for doing so when the directives
are encountered (unless it's a default section). This way, the recorded
line numbers for these args are the ones of the place where the log format
is declared, not the end of the file.
Userlists report slightly more information now. They're the only remaining
ones in the ACL resolving function.
The acl_expr struct used to hold a pointer to the ACL keyword. But since
we now have all the relevant pointers, we don't need that anymore, we just
need the pointer to the keyword as a string in order to return warnings
and error messages.
So let's change this in order to remove the dependency on the acl_keyword
struct from acl_expr.
During this change, acl_cond_kw_conflicts() used to return a pointer to an
ACL keyword but had to be changed to return a const char* for the same reason.
The ACLs now use the fetch's ->use and ->val to decide upon compatibility
between the place where they are used and where the information are fetched.
The code is capable of reporting warnings about very fine incompatibilities
between certain fetches and an exact usage location, so it is expected that
some new warnings will be emitted on some existing configurations.
Two degrees of detection are provided :
- detecting ACLs that never match
- detecting keywords that are ignored
All tests show that this seems to work well, though bugs are still possible.
Proxy's acl_requires was a copy of all bits taken from ACLs, but we'll
get rid of ACL flags and only rely on sample fetches soon. The proxy's
acl_requires was only used to allocate an HTTP context when needed, and
was even forced in HTTP mode. So better have a flag which exactly says
what it's supposed to be used for.
Now that ACLs solely rely on sample fetch functions, make them use the
same arg mask. All inconsistencies have been fixed separately prior to
this patch, so this patch almost only adds a new pointer indirection
and removes all references to ARG*() in the definitions.
The parsing is still performed by the ACL code though.
ACL fetch functions used to directly reference a fetch function. Now
that all ACL fetches have their sample fetches equivalent, we can make
ACLs reference a sample fetch keyword instead.
In order to simplify the code, a sample keyword name may be NULL if it
is the same as the ACL's, which is the most common case.
A minor change appeared, http_auth always expects one argument though
the ACL allowed it to be missing and reported as such afterwards, so
fix the ACL to match this. This is not really a bug.
