From d04c0d862ea7de4163b1ada129ee1883f9993ea8 Mon Sep 17 00:00:00 2001
From: Oleg Shchavelev <o.shchavelev@yandex.ru>
Date: Fri, 26 Apr 2024 00:03:48 +0300
Subject: [PATCH] docs: update booting text containers, issue #1

---
 .vitepress/config.mts                 | 7 +++++++
 docs/en/instalations/booting/index.md | 8 ++++++--
 docs/instalations/booting/index.md    | 8 ++++++--
 3 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/.vitepress/config.mts b/.vitepress/config.mts
index d3a2ae3..2b1069d 100644
--- a/.vitepress/config.mts
+++ b/.vitepress/config.mts
@@ -196,6 +196,13 @@ export default defineConfigWithTheme({
     },
   },
   markdown: {
+    container: {
+      tipLabel: 'TIPS',
+      warningLabel: 'WARNING',
+      dangerLabel: 'CAUTION',
+      infoLabel: 'NOTE',
+      detailsLabel: 'DETAILS'
+    },
     config: (md) => {
       md.use(markdownimeline);
     },
diff --git a/docs/en/instalations/booting/index.md b/docs/en/instalations/booting/index.md
index 5d46e54..a9caac2 100644
--- a/docs/en/instalations/booting/index.md
+++ b/docs/en/instalations/booting/index.md
@@ -21,7 +21,9 @@ dd if=spi.installer.img of=/dev/XXX bs=1M oflag=direct,sync status=progress
 
 - After writing the Tow-Boot image to the SD card, follow these steps:
 
-**Note:** If you are not sure that the battery is fully charged, it is recommended to connect the phone to a power source.
+::: info
+If you are not sure that the battery is fully charged, it is recommended to connect the phone to a power source.
+:::
 
 ### Installation process
 
@@ -37,7 +39,9 @@ dd if=spi.installer.img of=/dev/XXX bs=1M oflag=direct,sync status=progress
 8. After a while, the screen will turn on showing a blue color or directly load into the graphical installer interface.
 9. In the graphical installer interface, select "Install Tow-Boot to SPI", connect the charger to the phone, and press the "Start installation" button.
 
-**Note:** Erasing the storage before installation is not required. The erasing option can be used to remove Tow-Boot (or any other firmware installed in the SPI partition).
+:::info 
+Erasing the storage before installation is not required. The erasing option can be used to remove Tow-Boot (or any other firmware installed in the SPI partition).
+:::
 
 <Video id="7piXOM8G2uQ" />
 
diff --git a/docs/instalations/booting/index.md b/docs/instalations/booting/index.md
index 6984bf0..8ac6929 100644
--- a/docs/instalations/booting/index.md
+++ b/docs/instalations/booting/index.md
@@ -21,8 +21,10 @@ dd if=spi.installer.img of=/dev/XXX bs=1M oflag=direct,sync status=progress
 
 -   После записи образа Tow-Boot на SD карту, выполните следующие шаги:
 
-**Примечание:** Если не уверены, что батарея полностью заряжена,
+::: info 
+Если не уверены, что батарея полностью заряжена,
 рекомендуется подключить телефон к источнику питания.
+:::
 
 ### Процесс установки
 
@@ -47,9 +49,11 @@ dd if=spi.installer.img of=/dev/XXX bs=1M oflag=direct,sync status=progress
     SPI", подключите зарядку к телефону и нажмите кнопку "Start
     installation".
 
-**Примечание:** Стирание хранилища перед установкой не требуется. Опция
+::: info
+Стирание хранилища перед установкой не требуется. Опция
 стирания может использоваться для удаления Tow-Boot (или любого другого
 прошивочного ПО, установленного в раздел SPI).
+:::
 
 <Video id="7piXOM8G2uQ" />