IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
dracut builds today are fairly verbose to start, but on top of
that many of the messages tend to liberally use the
exclamation point `!` which calls attention to them.
I see these a lot when looking at rpm-ostree build logs
and it'd be nicer if we were quiet when there wasn't
an actual problem.
In this specific case, if the builder is explicitly adding
`--omit=foo`, there's no reason for us to say:
`dracut: dracut module 'foo' will not be installed, because it's in the list to be omitted!`
We already print the command line to start, so the information
is there.
Demote this message to debug.
/usr/sbin/dracut-install is a symlink:
$ file /usr/sbin/dracut-install
/usr/sbin/dracut-install: symbolic link to ../lib/dracut/dracut-install
It resulted to "dracut-install not found" error:
+++ for p in $DRACUT_PATH
+++ [[ -L /sbin/dracut-install ]]
+++ [[ -x /sbin/dracut-install ]]
+++ for p in $DRACUT_PATH
+++ [[ -L /bin/dracut-install ]]
+++ [[ -x /bin/dracut-install ]]
+++ for p in $DRACUT_PATH
+++ [[ -L /usr/sbin/dracut-install ]]
+++ printf '%s\n' dracut-install
+++ return 0
++ DRACUT_INSTALL=dracut-install
++ [[ -n dracut-install ]]
++ [[ -n dracut-install ]]
++ DRINSTALLPARTS=0
++ for i in $DRACUT_INSTALL
++ DRINSTALLPARTS=1
++ [[ 1 = 1 ]]
++ [[ -x dracut-install ]]
++ dfatal 'dracut-install not found!'
++ set +x
dracut: dracut-install not found!
[ -x <not a path to file> ] is not correct and will always be false.
But actually it is available. Let's just allow it to be not an absolute path.
Maybe some other places can be improved to avoid DRACUT_INSTALL being not an absolute path.
Signed-off-by: Mikhail Novosyolov <m.novosyolov@rosalinux.ru>
For the shell scripts, new environment variables were introduced.
dracutsysrootdir is the root directory, file existence checks use it.
DRACUT_LDCONFIG can override ldconfig with a different one that works
on the sysroot with foreign binaries.
DRACUT_LDD can override ldd with a different one that works
with foreign binaries.
DRACUT_TESTBIN can override /bin/sh. A cross-compiled sysroot
may use symlinks that are valid only when running on the target
so a real file must be provided that exist in the sysroot.
DRACUT_INSTALL now supports debugging dracut-install in itself
when run by dracut but without debugging the dracut scripts.
E.g. DRACUT_INSTALL="valgrind dracut-install or
DRACUT_INSTALL="dracut-install --debug".
DRACUT_COMPRESS_BZIP2, DRACUT_COMPRESS_LBZIP2, DRACUT_COMPRESS_LZMA,
DRACUT_COMPRESS_XZ, DRACUT_COMPRESS_GZIP, DRACUT_COMPRESS_PIGZ,
DRACUT_COMPRESS_LZOP, DRACUT_COMPRESS_ZSTD, DRACUT_COMPRESS_LZ4,
DRACUT_COMPRESS_CAT: All of the compression utilities may be
overridden, to support the native binaries in non-standard places.
DRACUT_ARCH overrides "uname -m".
SYSTEMD_VERSION overrides "systemd --version".
The dracut-install utility was overhauled to support sysroot via
a new option -r and fixes for clang-analyze. It supports
cross-compiler-ldd from
https://gist.github.com/jerome-pouiller/c403786c1394f53f44a3b61214489e6f
DRACUT_INSTALL_PATH was introduced so dracut-install can work with
a different PATH. In a cross-compiled environment (e.g. Yocto), PATH
points to natively built binaries that are not in the host's /bin,
/usr/bin, etc. dracut-install still needs plain /bin and /usr/bin
that are relative to the cross-compiled sysroot.
The hashmap pool allocate_tile/deallocate_tile code was removed
because clang-analyze showed errors in it. hashmap_copy was removed
because it wasn't used and clang-analyze showed errors in it.
DRACUT_INSTALL_LOG_TARGET and DRACUT_INSTALL_LOG_LEVEL were
introduced so dracut-install can use different settings from
DRACUT_LOG_TARGET and DRACUT_LOG_LEVEL.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
Kill the no longer used function, so that anyone won't be confused and
try to modify this function in future.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1146769
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a module is compressed, uncompress it before packing into initrd.
Since initrd is already compressed, it makes no sense to put the
compressed module files.
The patch contains a slight refactoring and adds a helper function to
get the command for uncompressing a file per extension.
systemctl need to be accessible on switch-root, but we unmount the
squash image on switch-root, so it will fail. systemctl depends on a lot
of libraries, squash them can save more RAM. So allow modules
(eg. kdump) to tell dracut that switch-root will be intercepted,
then we don't need to take care of that.
Signed-off-by: Kairui Song <kasong@redhat.com>
The upcoming kernel will have a support for loading compressed
firmware files, and this patch corresponds to that kernel change.
When a firmware file with the extra .xz extension is found, dracut
copies to initrd as fallback. Since initrd itself is compressed, the
file is uncompressed in initrd beforehand.
Let the caller pass in the module path instead of try to find the module
path everytime. This helps optimize the overall runtime.
Test results (3 rounds) on Fedora 30 in KVM VM with 8 CPUs, 2G memory, HDD:
$ time ./dracut.sh --local --quiet --hostonly --hostonly-cmdline --hostonly-i18n --hostonly-mode 'strict' -o 'plymouth dash resume ifcfg' --mount '/dev/mapper/fedora-root /sysroot xfs defaults' --no-hostonly-default-device -f initramfs.img
Before the commit:
real 0m11.782s | real 0m11.505s | real 0m11.958s
user 0m9.169s | user 0m9.218s | user 0m9.327s
sys 0m10.839s | sys 0m10.829s | sys 0m10.925s
After this commit:
real 0m9.866s | real 0m9.580s | real 0m9.638s
user 0m9.048s | user 0m9.142s | user 0m9.120s
sys 0m7.411s | sys 0m7.775s | sys 0m7.745s
Test result of building a ordinary image:
$ time ./dracut.sh --local --quiet -f initramfs.img
Before the commit:
real 0m34.697s | real 0m34.371s | real 0m35.122s
user 0m27.608s | user 0m27.524s | user 0m27.705s
sys 0m22.341s | sys 0m22.032s | sys 0m22.246s
After the commit:
real 0m31.914s | real 0m31.006 | real 0m31.289ss
user 0m27.315s | user 0m27.324 | user 0m27.290ss
sys 0m19.051s | sys 0m18.916 | sys 0m19.022ss
This will have an ~2s speed up.
Signed-off-by: Kairui Song <kasong@redhat.com>
Add a new option --hostonly-mode which accept an <mode> parameter, so we have a tri-state hostonly mode:
* generic: by passing "--no-hostonly" or not passing anything.
"--hostonly-mode" has no effect in such case.
* sloppy: by passing "--hostonly --hostonly-mode sloppy". This
is also the default mode when only "--hostonly" is given.
* strict: by passing "--hostonly --hostonly-mode strict".
Sloppy mode is the original hostonly mode, the new introduced strict
mode will allow modules to ignore more drivers or do some extra job to
save memory and disk space, while making the image less portable.
Also introduced a helper function "optional_hostonly" to make it
easier for modules to leverage new hostonly mode.
To force install modules only in sloppy hostonly mode, use the form:
hostonly="$(optional_hostonly)" instmods <modules>
Signed-off-by: Kairui Song <kasong@redhat.com>
Error: SHELLCHECK_WARNING:
/usr/lib/dracut/dracut-init.sh:939:20: error: Argument to implicit -n is always true due to literal strings. [SC2157]
937| dracut_kernel_post() {
938| for _f in modules.builtin.bin modules.builtin modules.order; do
939|-> [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
940| done
941|
Error: SHELLCHECK_WARNING:
/usr/lib/dracut/modules.d/98syslog/parse-syslog-opts.sh:18:12: error: This expression is constant. Did you forget a $ somewhere? [SC2078]
16| elif [ -e /sbin/syslogd ]; then
17| syslogtype="syslogd"
18|-> elif [ /sbin/syslog-ng ]; then
19| syslogtype="syslog-ng"
20| else
Error: SHELLCHECK_WARNING:
/usr/lib/dracut/modules.d/90crypt/crypt-lib.sh:15:29: error: Since you double quoted this, it will not word split, and the loop will only run once. [SC2066]
13| strstr "$d" "${luks##luks-}" && return 0
14| if [ -n "$dev" ]; then
15|-> for _dev in "$(devnames $d)"; do
16| [ "$dev" -ef "$_dev" ] && return 0
17| done
Allow filesystem modules to install a fs-specific text file with
instructions on what to do when mount fails. This is printed when we go into
an emergency shell.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
