2017-02-23 06:40:44 +03:00
// Copyright 2017 The Gitea Authors. All rights reserved.
2022-11-27 21:20:29 +03:00
// SPDX-License-Identifier: MIT
2017-02-23 06:40:44 +03:00
package cmd
import (
2017-02-25 17:54:40 +03:00
"bufio"
"bytes"
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
"context"
2017-02-23 06:40:44 +03:00
"fmt"
2020-01-12 11:46:03 +03:00
"io"
2017-02-23 06:40:44 +03:00
"os"
2017-02-25 17:54:40 +03:00
"strconv"
"strings"
2020-01-12 11:46:03 +03:00
"time"
2017-02-23 06:40:44 +03:00
2019-03-27 12:33:00 +03:00
"code.gitea.io/gitea/modules/git"
2023-06-28 09:02:06 +03:00
"code.gitea.io/gitea/modules/log"
2017-05-04 08:42:02 +03:00
"code.gitea.io/gitea/modules/private"
2022-05-08 19:46:32 +03:00
repo_module "code.gitea.io/gitea/modules/repository"
2019-11-15 01:39:48 +03:00
"code.gitea.io/gitea/modules/setting"
2017-02-23 06:40:44 +03:00
2023-07-21 12:28:19 +03:00
"github.com/urfave/cli/v2"
2017-02-23 06:40:44 +03:00
)
2019-12-26 14:29:45 +03:00
const (
hookBatchSize = 30
)
2017-02-23 06:40:44 +03:00
var (
// CmdHook represents the available hooks sub-command.
2023-07-21 12:28:19 +03:00
CmdHook = & cli . Command {
2017-02-23 06:40:44 +03:00
Name : "hook" ,
2023-12-15 18:49:01 +03:00
Usage : "(internal) Should only be called by Git" ,
Description : "Delegate commands to corresponding Git hooks" ,
2023-06-28 09:02:06 +03:00
Before : PrepareConsoleLoggerLevel ( log . FATAL ) ,
2023-07-21 12:28:19 +03:00
Subcommands : [ ] * cli . Command {
2017-02-23 06:40:44 +03:00
subcmdHookPreReceive ,
2018-01-13 01:16:49 +03:00
subcmdHookUpdate ,
2017-02-23 06:40:44 +03:00
subcmdHookPostReceive ,
2021-07-28 12:42:56 +03:00
subcmdHookProcReceive ,
2017-02-23 06:40:44 +03:00
} ,
}
2023-07-21 12:28:19 +03:00
subcmdHookPreReceive = & cli . Command {
2017-02-23 06:40:44 +03:00
Name : "pre-receive" ,
Usage : "Delegate pre-receive Git hook" ,
Description : "This command should only be called by Git" ,
Action : runHookPreReceive ,
2020-05-29 06:04:44 +03:00
Flags : [ ] cli . Flag {
2023-07-21 12:28:19 +03:00
& cli . BoolFlag {
2020-05-29 06:04:44 +03:00
Name : "debug" ,
} ,
} ,
2017-02-23 06:40:44 +03:00
}
2023-07-21 12:28:19 +03:00
subcmdHookUpdate = & cli . Command {
2017-02-23 06:40:44 +03:00
Name : "update" ,
Usage : "Delegate update Git hook" ,
Description : "This command should only be called by Git" ,
Action : runHookUpdate ,
2020-05-29 06:04:44 +03:00
Flags : [ ] cli . Flag {
2023-07-21 12:28:19 +03:00
& cli . BoolFlag {
2020-05-29 06:04:44 +03:00
Name : "debug" ,
} ,
} ,
2017-02-23 06:40:44 +03:00
}
2023-07-21 12:28:19 +03:00
subcmdHookPostReceive = & cli . Command {
2017-02-23 06:40:44 +03:00
Name : "post-receive" ,
Usage : "Delegate post-receive Git hook" ,
Description : "This command should only be called by Git" ,
Action : runHookPostReceive ,
2020-05-29 06:04:44 +03:00
Flags : [ ] cli . Flag {
2023-07-21 12:28:19 +03:00
& cli . BoolFlag {
2020-05-29 06:04:44 +03:00
Name : "debug" ,
} ,
} ,
2017-02-23 06:40:44 +03:00
}
2021-07-28 12:42:56 +03:00
// Note: new hook since git 2.29
2023-07-21 12:28:19 +03:00
subcmdHookProcReceive = & cli . Command {
2021-07-28 12:42:56 +03:00
Name : "proc-receive" ,
Usage : "Delegate proc-receive Git hook" ,
Description : "This command should only be called by Git" ,
Action : runHookProcReceive ,
Flags : [ ] cli . Flag {
2023-07-21 12:28:19 +03:00
& cli . BoolFlag {
2021-07-28 12:42:56 +03:00
Name : "debug" ,
} ,
} ,
}
2017-02-23 06:40:44 +03:00
)
2020-01-12 11:46:03 +03:00
type delayWriter struct {
internal io . Writer
buf * bytes . Buffer
timer * time . Timer
}
func newDelayWriter ( internal io . Writer , delay time . Duration ) * delayWriter {
timer := time . NewTimer ( delay )
return & delayWriter {
internal : internal ,
buf : & bytes . Buffer { } ,
timer : timer ,
}
}
func ( d * delayWriter ) Write ( p [ ] byte ) ( n int , err error ) {
if d . buf != nil {
select {
case <- d . timer . C :
_ , err := d . internal . Write ( d . buf . Bytes ( ) )
if err != nil {
return 0 , err
}
d . buf = nil
return d . internal . Write ( p )
default :
return d . buf . Write ( p )
}
}
return d . internal . Write ( p )
}
func ( d * delayWriter ) WriteString ( s string ) ( n int , err error ) {
if d . buf != nil {
select {
case <- d . timer . C :
_ , err := d . internal . Write ( d . buf . Bytes ( ) )
if err != nil {
return 0 , err
}
d . buf = nil
return d . internal . Write ( [ ] byte ( s ) )
default :
return d . buf . WriteString ( s )
}
}
return d . internal . Write ( [ ] byte ( s ) )
}
func ( d * delayWriter ) Close ( ) error {
if d == nil {
return nil
}
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
2023-05-08 14:49:59 +03:00
stopped := d . timer . Stop ( )
2020-05-08 18:46:05 +03:00
if stopped || d . buf == nil {
2020-01-12 11:46:03 +03:00
return nil
}
_ , err := d . internal . Write ( d . buf . Bytes ( ) )
d . buf = nil
return err
}
type nilWriter struct { }
func ( n * nilWriter ) Write ( p [ ] byte ) ( int , error ) {
return len ( p ) , nil
}
func ( n * nilWriter ) WriteString ( s string ) ( int , error ) {
return len ( s ) , nil
}
2017-02-23 06:40:44 +03:00
func runHookPreReceive ( c * cli . Context ) error {
2022-05-08 19:46:32 +03:00
if isInternal , _ := strconv . ParseBool ( os . Getenv ( repo_module . EnvIsInternal ) ) ; isInternal {
2019-12-28 00:15:04 +03:00
return nil
}
2021-07-14 17:43:13 +03:00
ctx , cancel := installSignals ( )
defer cancel ( )
2019-12-28 00:15:04 +03:00
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
setup ( ctx , c . Bool ( "debug" ) )
2019-12-28 00:15:04 +03:00
2017-02-23 06:40:44 +03:00
if len ( os . Getenv ( "SSH_ORIGINAL_COMMAND" ) ) == 0 {
2019-11-15 01:39:48 +03:00
if setting . OnlyAllowPushIfGiteaEnvironmentSet {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , ` Rejecting changes as Gitea environment not set .
2019-11-15 01:39:48 +03:00
If you are pushing over SSH you must push with a key managed by
Gitea or set your environment appropriately . ` , "" )
}
2021-07-14 17:43:13 +03:00
return nil
2017-02-23 06:40:44 +03:00
}
2017-02-25 17:54:40 +03:00
2021-07-08 14:38:13 +03:00
// the environment is set by serv command
2022-05-08 19:46:32 +03:00
isWiki , _ := strconv . ParseBool ( os . Getenv ( repo_module . EnvRepoIsWiki ) )
username := os . Getenv ( repo_module . EnvRepoUsername )
reponame := os . Getenv ( repo_module . EnvRepoName )
userID , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvPusherID ) , 10 , 64 )
prID , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvPRID ) , 10 , 64 )
deployKeyID , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvDeployKeyID ) , 10 , 64 )
Implement actions (#21937)
Close #13539.
Co-authored by: @lunny @appleboy @fuxiaohei and others.
Related projects:
- https://gitea.com/gitea/actions-proto-def
- https://gitea.com/gitea/actions-proto-go
- https://gitea.com/gitea/act
- https://gitea.com/gitea/act_runner
### Summary
The target of this PR is to bring a basic implementation of "Actions",
an internal CI/CD system of Gitea. That means even though it has been
merged, the state of the feature is **EXPERIMENTAL**, and please note
that:
- It is disabled by default;
- It shouldn't be used in a production environment currently;
- It shouldn't be used in a public Gitea instance currently;
- Breaking changes may be made before it's stable.
**Please comment on #13539 if you have any different product design
ideas**, all decisions reached there will be adopted here. But in this
PR, we don't talk about **naming, feature-creep or alternatives**.
### ⚠️ Breaking
`gitea-actions` will become a reserved user name. If a user with the
name already exists in the database, it is recommended to rename it.
### Some important reviews
- What is `DEFAULT_ACTIONS_URL` in `app.ini` for?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954
- Why the api for runners is not under the normal `/api/v1` prefix?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592
- Why DBFS?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178
- Why ignore events triggered by `gitea-actions` bot?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103
- Why there's no permission control for actions?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868
### What it looks like
<details>
#### Manage runners
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png">
#### List runs
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png">
#### View logs
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png">
</details>
### How to try it
<details>
#### 1. Start Gitea
Clone this branch and [install from
source](https://docs.gitea.io/en-us/install-from-source).
Add additional configurations in `app.ini` to enable Actions:
```ini
[actions]
ENABLED = true
```
Start it.
If all is well, you'll see the management page of runners:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png">
#### 2. Start runner
Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow
the
[README](https://gitea.com/gitea/act_runner/src/branch/main/README.md)
to start it.
If all is well, you'll see a new runner has been added:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png">
#### 3. Enable actions for a repo
Create a new repo or open an existing one, check the `Actions` checkbox
in settings and submit.
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png">
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png">
If all is well, you'll see a new tab "Actions":
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png">
#### 4. Upload workflow files
Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can
follow the [quickstart](https://docs.github.com/en/actions/quickstart)
of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions
in most cases, you can use the same demo:
```yaml
name: GitHub Actions Demo
run-name: ${{ github.actor }} is testing out GitHub Actions 🚀
on: [push]
jobs:
Explore-GitHub-Actions:
runs-on: ubuntu-latest
steps:
- run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event."
- run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!"
- run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}."
- name: Check out repository code
uses: actions/checkout@v3
- run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner."
- run: echo "🖥️ The workflow is now ready to test your code on the runner."
- name: List files in the repository
run: |
ls ${{ github.workspace }}
- run: echo "🍏 This job's status is ${{ job.status }}."
```
If all is well, you'll see a new run in `Actions` tab:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png">
#### 5. Check the logs of jobs
Click a run and you'll see the logs:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png">
#### 6. Go on
You can try more examples in [the
documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions)
of GitHub Actions, then you might find a lot of bugs.
Come on, PRs are welcome.
</details>
See also: [Feature Preview: Gitea
Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/)
---------
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 04:45:19 +03:00
actionPerm , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvActionPerm ) , 10 , 64 )
2017-02-25 17:54:40 +03:00
2019-12-26 14:29:45 +03:00
hookOptions := private . HookOptions {
UserID : userID ,
GitAlternativeObjectDirectories : os . Getenv ( private . GitAlternativeObjectDirectories ) ,
GitObjectDirectory : os . Getenv ( private . GitObjectDirectory ) ,
GitQuarantinePath : os . Getenv ( private . GitQuarantinePath ) ,
2020-08-23 19:02:35 +03:00
GitPushOptions : pushOptions ( ) ,
2021-06-23 22:38:19 +03:00
PullRequestID : prID ,
2022-03-22 12:29:07 +03:00
DeployKeyID : deployKeyID ,
Implement actions (#21937)
Close #13539.
Co-authored by: @lunny @appleboy @fuxiaohei and others.
Related projects:
- https://gitea.com/gitea/actions-proto-def
- https://gitea.com/gitea/actions-proto-go
- https://gitea.com/gitea/act
- https://gitea.com/gitea/act_runner
### Summary
The target of this PR is to bring a basic implementation of "Actions",
an internal CI/CD system of Gitea. That means even though it has been
merged, the state of the feature is **EXPERIMENTAL**, and please note
that:
- It is disabled by default;
- It shouldn't be used in a production environment currently;
- It shouldn't be used in a public Gitea instance currently;
- Breaking changes may be made before it's stable.
**Please comment on #13539 if you have any different product design
ideas**, all decisions reached there will be adopted here. But in this
PR, we don't talk about **naming, feature-creep or alternatives**.
### ⚠️ Breaking
`gitea-actions` will become a reserved user name. If a user with the
name already exists in the database, it is recommended to rename it.
### Some important reviews
- What is `DEFAULT_ACTIONS_URL` in `app.ini` for?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954
- Why the api for runners is not under the normal `/api/v1` prefix?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592
- Why DBFS?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178
- Why ignore events triggered by `gitea-actions` bot?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103
- Why there's no permission control for actions?
- https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868
### What it looks like
<details>
#### Manage runners
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png">
#### List runs
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png">
#### View logs
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png">
</details>
### How to try it
<details>
#### 1. Start Gitea
Clone this branch and [install from
source](https://docs.gitea.io/en-us/install-from-source).
Add additional configurations in `app.ini` to enable Actions:
```ini
[actions]
ENABLED = true
```
Start it.
If all is well, you'll see the management page of runners:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png">
#### 2. Start runner
Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow
the
[README](https://gitea.com/gitea/act_runner/src/branch/main/README.md)
to start it.
If all is well, you'll see a new runner has been added:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png">
#### 3. Enable actions for a repo
Create a new repo or open an existing one, check the `Actions` checkbox
in settings and submit.
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png">
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png">
If all is well, you'll see a new tab "Actions":
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png">
#### 4. Upload workflow files
Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can
follow the [quickstart](https://docs.github.com/en/actions/quickstart)
of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions
in most cases, you can use the same demo:
```yaml
name: GitHub Actions Demo
run-name: ${{ github.actor }} is testing out GitHub Actions 🚀
on: [push]
jobs:
Explore-GitHub-Actions:
runs-on: ubuntu-latest
steps:
- run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event."
- run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!"
- run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}."
- name: Check out repository code
uses: actions/checkout@v3
- run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner."
- run: echo "🖥️ The workflow is now ready to test your code on the runner."
- name: List files in the repository
run: |
ls ${{ github.workspace }}
- run: echo "🍏 This job's status is ${{ job.status }}."
```
If all is well, you'll see a new run in `Actions` tab:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png">
#### 5. Check the logs of jobs
Click a run and you'll see the logs:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png">
#### 6. Go on
You can try more examples in [the
documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions)
of GitHub Actions, then you might find a lot of bugs.
Come on, PRs are welcome.
</details>
See also: [Feature Preview: Gitea
Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/)
---------
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 04:45:19 +03:00
ActionPerm : int ( actionPerm ) ,
2019-12-26 14:29:45 +03:00
}
2017-02-25 17:54:40 +03:00
scanner := bufio . NewScanner ( os . Stdin )
2019-12-26 14:29:45 +03:00
oldCommitIDs := make ( [ ] string , hookBatchSize )
newCommitIDs := make ( [ ] string , hookBatchSize )
2023-05-26 04:04:48 +03:00
refFullNames := make ( [ ] git . RefName , hookBatchSize )
2019-12-26 14:29:45 +03:00
count := 0
total := 0
lastline := 0
2020-01-12 11:46:03 +03:00
var out io . Writer
out = & nilWriter { }
if setting . Git . VerbosePush {
if setting . Git . VerbosePushDelay > 0 {
dWriter := newDelayWriter ( os . Stdout , setting . Git . VerbosePushDelay )
defer dWriter . Close ( )
out = dWriter
} else {
out = os . Stdout
}
}
2024-05-06 19:34:16 +03:00
supportProcReceive := git . DefaultFeatures ( ) . SupportProcReceive
2021-07-28 12:42:56 +03:00
2019-12-26 14:29:45 +03:00
for scanner . Scan ( ) {
2017-02-25 17:54:40 +03:00
// TODO: support news feeds for wiki
if isWiki {
continue
}
fields := bytes . Fields ( scanner . Bytes ( ) )
if len ( fields ) != 3 {
continue
}
2017-09-14 11:16:22 +03:00
oldCommitID := string ( fields [ 0 ] )
2017-02-25 17:54:40 +03:00
newCommitID := string ( fields [ 1 ] )
2023-05-26 04:04:48 +03:00
refFullName := git . RefName ( fields [ 2 ] )
2019-12-26 14:29:45 +03:00
total ++
lastline ++
2017-02-25 17:54:40 +03:00
2021-06-25 17:28:55 +03:00
// If the ref is a branch or tag, check if it's protected
2022-11-26 19:21:54 +03:00
// if supportProcReceive all ref should be checked because
2021-07-28 12:42:56 +03:00
// permission check was delayed
2023-05-26 04:04:48 +03:00
if supportProcReceive || refFullName . IsBranch ( ) || refFullName . IsTag ( ) {
2019-12-26 14:29:45 +03:00
oldCommitIDs [ count ] = oldCommitID
newCommitIDs [ count ] = newCommitID
refFullNames [ count ] = refFullName
count ++
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "*" )
2019-12-26 14:29:45 +03:00
if count >= hookBatchSize {
2021-06-25 17:28:55 +03:00
fmt . Fprintf ( out , " Checking %d references\n" , count )
2019-12-26 14:29:45 +03:00
hookOptions . OldCommitIDs = oldCommitIDs
hookOptions . NewCommitIDs = newCommitIDs
hookOptions . RefFullNames = refFullNames
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
extra := private . HookPreReceive ( ctx , username , reponame , hookOptions )
if extra . HasError ( ) {
return fail ( ctx , extra . UserMsg , "HookPreReceive(batch) failed: %v" , extra . Error )
2019-12-26 14:29:45 +03:00
}
count = 0
lastline = 0
2017-03-01 18:01:03 +03:00
}
2019-12-26 14:29:45 +03:00
} else {
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "." )
2019-12-26 14:29:45 +03:00
}
if lastline >= hookBatchSize {
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "\n" )
2019-12-26 14:29:45 +03:00
lastline = 0
2017-02-25 17:54:40 +03:00
}
}
2019-12-26 14:29:45 +03:00
if count > 0 {
hookOptions . OldCommitIDs = oldCommitIDs [ : count ]
hookOptions . NewCommitIDs = newCommitIDs [ : count ]
hookOptions . RefFullNames = refFullNames [ : count ]
2021-06-25 17:28:55 +03:00
fmt . Fprintf ( out , " Checking %d references\n" , count )
2019-12-26 14:29:45 +03:00
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
extra := private . HookPreReceive ( ctx , username , reponame , hookOptions )
if extra . HasError ( ) {
return fail ( ctx , extra . UserMsg , "HookPreReceive(last) failed: %v" , extra . Error )
2019-12-26 14:29:45 +03:00
}
} else if lastline > 0 {
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "\n" )
2019-12-26 14:29:45 +03:00
}
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "Checked %d references in total\n" , total )
2017-02-23 06:40:44 +03:00
return nil
}
2024-09-02 10:38:27 +03:00
// runHookUpdate avoid to do heavy operations on update hook because it will be
// invoked for every ref update which does not like pre-receive and post-receive
2017-02-23 06:40:44 +03:00
func runHookUpdate ( c * cli . Context ) error {
2024-09-02 10:38:27 +03:00
if isInternal , _ := strconv . ParseBool ( os . Getenv ( repo_module . EnvIsInternal ) ) ; isInternal {
return nil
}
2019-12-27 18:21:33 +03:00
// Update is empty and is kept only for backwards compatibility
2024-09-02 10:38:27 +03:00
if len ( os . Args ) < 3 {
return nil
}
refName := git . RefName ( os . Args [ len ( os . Args ) - 3 ] )
if refName . IsPull ( ) {
// ignore update to refs/pull/xxx/head, so we don't need to output any information
os . Exit ( 1 )
}
2017-02-23 06:40:44 +03:00
return nil
}
func runHookPostReceive ( c * cli . Context ) error {
2021-07-14 17:43:13 +03:00
ctx , cancel := installSignals ( )
defer cancel ( )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
setup ( ctx , c . Bool ( "debug" ) )
2022-06-16 18:47:44 +03:00
2020-10-13 19:24:06 +03:00
// First of all run update-server-info no matter what
2022-04-01 05:55:30 +03:00
if _ , _ , err := git . NewCommand ( ctx , "update-server-info" ) . RunStdString ( nil ) ; err != nil {
2022-10-24 22:29:17 +03:00
return fmt . Errorf ( "Failed to call 'git update-server-info': %w" , err )
2020-10-13 19:24:06 +03:00
}
// Now if we're an internal don't do anything else
2022-05-08 19:46:32 +03:00
if isInternal , _ := strconv . ParseBool ( os . Getenv ( repo_module . EnvIsInternal ) ) ; isInternal {
2019-12-28 00:15:04 +03:00
return nil
}
2017-02-23 06:40:44 +03:00
if len ( os . Getenv ( "SSH_ORIGINAL_COMMAND" ) ) == 0 {
2019-11-15 01:39:48 +03:00
if setting . OnlyAllowPushIfGiteaEnvironmentSet {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , ` Rejecting changes as Gitea environment not set .
2019-11-15 01:39:48 +03:00
If you are pushing over SSH you must push with a key managed by
Gitea or set your environment appropriately . ` , "" )
}
2021-07-14 17:43:13 +03:00
return nil
2017-02-23 06:40:44 +03:00
}
2020-01-12 11:46:03 +03:00
var out io . Writer
var dWriter * delayWriter
out = & nilWriter { }
if setting . Git . VerbosePush {
if setting . Git . VerbosePushDelay > 0 {
dWriter = newDelayWriter ( os . Stdout , setting . Git . VerbosePushDelay )
defer dWriter . Close ( )
out = dWriter
} else {
out = os . Stdout
}
}
2021-07-08 14:38:13 +03:00
// the environment is set by serv command
2022-05-08 19:46:32 +03:00
repoUser := os . Getenv ( repo_module . EnvRepoUsername )
isWiki , _ := strconv . ParseBool ( os . Getenv ( repo_module . EnvRepoIsWiki ) )
repoName := os . Getenv ( repo_module . EnvRepoName )
pusherID , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvPusherID ) , 10 , 64 )
2024-05-07 10:36:48 +03:00
prID , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvPRID ) , 10 , 64 )
2022-05-08 19:46:32 +03:00
pusherName := os . Getenv ( repo_module . EnvPusherName )
2017-02-25 17:54:40 +03:00
2019-12-26 14:29:45 +03:00
hookOptions := private . HookOptions {
UserName : pusherName ,
UserID : pusherID ,
GitAlternativeObjectDirectories : os . Getenv ( private . GitAlternativeObjectDirectories ) ,
GitObjectDirectory : os . Getenv ( private . GitObjectDirectory ) ,
GitQuarantinePath : os . Getenv ( private . GitQuarantinePath ) ,
2020-08-23 19:02:35 +03:00
GitPushOptions : pushOptions ( ) ,
2024-05-07 10:36:48 +03:00
PullRequestID : prID ,
PushTrigger : repo_module . PushTrigger ( os . Getenv ( repo_module . EnvPushTrigger ) ) ,
2019-12-26 14:29:45 +03:00
}
oldCommitIDs := make ( [ ] string , hookBatchSize )
newCommitIDs := make ( [ ] string , hookBatchSize )
2023-05-26 04:04:48 +03:00
refFullNames := make ( [ ] git . RefName , hookBatchSize )
2019-12-26 14:29:45 +03:00
count := 0
total := 0
wasEmpty := false
masterPushed := false
results := make ( [ ] private . HookPostReceiveBranchResult , 0 )
2017-02-25 17:54:40 +03:00
scanner := bufio . NewScanner ( os . Stdin )
for scanner . Scan ( ) {
// TODO: support news feeds for wiki
if isWiki {
continue
}
fields := bytes . Fields ( scanner . Bytes ( ) )
if len ( fields ) != 3 {
continue
}
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "." )
2019-12-26 14:29:45 +03:00
oldCommitIDs [ count ] = string ( fields [ 0 ] )
newCommitIDs [ count ] = string ( fields [ 1 ] )
2023-05-26 04:04:48 +03:00
refFullNames [ count ] = git . RefName ( fields [ 2 ] )
2023-12-14 00:02:00 +03:00
2023-12-19 10:20:47 +03:00
commitID , _ := git . NewIDFromString ( newCommitIDs [ count ] )
2023-12-14 00:02:00 +03:00
if refFullNames [ count ] == git . BranchPrefix + "master" && ! commitID . IsZero ( ) && count == total {
2019-12-26 14:29:45 +03:00
masterPushed = true
}
count ++
total ++
if count >= hookBatchSize {
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , " Processing %d references\n" , count )
2019-12-26 14:29:45 +03:00
hookOptions . OldCommitIDs = oldCommitIDs
hookOptions . NewCommitIDs = newCommitIDs
hookOptions . RefFullNames = refFullNames
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
resp , extra := private . HookPostReceive ( ctx , repoUser , repoName , hookOptions )
if extra . HasError ( ) {
2020-01-12 11:46:03 +03:00
_ = dWriter . Close ( )
2019-12-26 14:29:45 +03:00
hookPrintResults ( results )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , extra . UserMsg , "HookPostReceive failed: %v" , extra . Error )
2019-12-26 14:29:45 +03:00
}
wasEmpty = wasEmpty || resp . RepoWasEmpty
results = append ( results , resp . Results ... )
count = 0
}
}
if count == 0 {
if wasEmpty && masterPushed {
// We need to tell the repo to reset the default branch to master
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
extra := private . SetDefaultBranch ( ctx , repoUser , repoName , "master" )
if extra . HasError ( ) {
return fail ( ctx , extra . UserMsg , "SetDefaultBranch failed: %v" , extra . Error )
2019-12-26 14:29:45 +03:00
}
}
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "Processed %d references in total\n" , total )
2019-12-26 14:29:45 +03:00
2020-01-12 11:46:03 +03:00
_ = dWriter . Close ( )
2019-12-26 14:29:45 +03:00
hookPrintResults ( results )
return nil
}
2017-02-25 17:54:40 +03:00
2019-12-26 14:29:45 +03:00
hookOptions . OldCommitIDs = oldCommitIDs [ : count ]
hookOptions . NewCommitIDs = newCommitIDs [ : count ]
hookOptions . RefFullNames = refFullNames [ : count ]
2018-10-20 09:59:06 +03:00
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , " Processing %d references\n" , count )
2019-12-26 14:29:45 +03:00
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
resp , extra := private . HookPostReceive ( ctx , repoUser , repoName , hookOptions )
2019-12-26 14:29:45 +03:00
if resp == nil {
2020-01-12 11:46:03 +03:00
_ = dWriter . Close ( )
2019-12-26 14:29:45 +03:00
hookPrintResults ( results )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , extra . UserMsg , "HookPostReceive failed: %v" , extra . Error )
2019-12-26 14:29:45 +03:00
}
wasEmpty = wasEmpty || resp . RepoWasEmpty
results = append ( results , resp . Results ... )
2020-01-12 11:46:03 +03:00
fmt . Fprintf ( out , "Processed %d references in total\n" , total )
2019-12-26 14:29:45 +03:00
if wasEmpty && masterPushed {
// We need to tell the repo to reset the default branch to master
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
extra := private . SetDefaultBranch ( ctx , repoUser , repoName , "master" )
if extra . HasError ( ) {
return fail ( ctx , extra . UserMsg , "SetDefaultBranch failed: %v" , extra . Error )
2019-06-01 18:00:21 +03:00
}
2019-12-26 14:29:45 +03:00
}
2020-01-12 11:46:03 +03:00
_ = dWriter . Close ( )
2019-12-26 14:29:45 +03:00
hookPrintResults ( results )
2018-10-20 09:59:06 +03:00
2019-12-26 14:29:45 +03:00
return nil
}
func hookPrintResults ( results [ ] private . HookPostReceiveBranchResult ) {
for _ , res := range results {
2024-04-09 06:43:17 +03:00
hookPrintResult ( res . Message , res . Create , res . Branch , res . URL )
}
}
2018-10-20 09:59:06 +03:00
2024-04-09 06:43:17 +03:00
func hookPrintResult ( output , isCreate bool , branch , url string ) {
if ! output {
return
}
fmt . Fprintln ( os . Stderr , "" )
if isCreate {
fmt . Fprintf ( os . Stderr , "Create a new pull request for '%s':\n" , branch )
fmt . Fprintf ( os . Stderr , " %s\n" , url )
} else {
fmt . Fprint ( os . Stderr , "Visit the existing pull request:\n" )
fmt . Fprintf ( os . Stderr , " %s\n" , url )
2017-02-25 17:54:40 +03:00
}
2024-04-09 06:43:17 +03:00
fmt . Fprintln ( os . Stderr , "" )
2024-04-22 14:48:42 +03:00
_ = os . Stderr . Sync ( )
2017-02-23 06:40:44 +03:00
}
2020-08-23 19:02:35 +03:00
func pushOptions ( ) map [ string ] string {
opts := make ( map [ string ] string )
if pushCount , err := strconv . Atoi ( os . Getenv ( private . GitPushOptionCount ) ) ; err == nil {
for idx := 0 ; idx < pushCount ; idx ++ {
opt := os . Getenv ( fmt . Sprintf ( "GIT_PUSH_OPTION_%d" , idx ) )
kv := strings . SplitN ( opt , "=" , 2 )
if len ( kv ) == 2 {
opts [ kv [ 0 ] ] = kv [ 1 ]
}
}
}
return opts
}
2021-07-28 12:42:56 +03:00
func runHookProcReceive ( c * cli . Context ) error {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
ctx , cancel := installSignals ( )
defer cancel ( )
setup ( ctx , c . Bool ( "debug" ) )
2021-07-28 12:42:56 +03:00
if len ( os . Getenv ( "SSH_ORIGINAL_COMMAND" ) ) == 0 {
if setting . OnlyAllowPushIfGiteaEnvironmentSet {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , ` Rejecting changes as Gitea environment not set .
2021-07-28 12:42:56 +03:00
If you are pushing over SSH you must push with a key managed by
Gitea or set your environment appropriately . ` , "" )
}
return nil
}
2024-05-06 19:34:16 +03:00
if ! git . DefaultFeatures ( ) . SupportProcReceive {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , "No proc-receive support" , "current git version doesn't support proc-receive." )
2021-07-28 12:42:56 +03:00
}
reader := bufio . NewReader ( os . Stdin )
2022-05-08 19:46:32 +03:00
repoUser := os . Getenv ( repo_module . EnvRepoUsername )
repoName := os . Getenv ( repo_module . EnvRepoName )
pusherID , _ := strconv . ParseInt ( os . Getenv ( repo_module . EnvPusherID ) , 10 , 64 )
pusherName := os . Getenv ( repo_module . EnvPusherName )
2021-07-28 12:42:56 +03:00
// 1. Version and features negotiation.
// S: PKT-LINE(version=1\0push-options atomic...) / PKT-LINE(version=1\n)
// S: flush-pkt
// H: PKT-LINE(version=1\0push-options...)
// H: flush-pkt
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
rs , err := readPktLine ( ctx , reader , pktLineTypeData )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
const VersionHead string = "version=1"
var (
hasPushOptions bool
response = [ ] byte ( VersionHead )
requestOptions [ ] string
)
index := bytes . IndexByte ( rs . Data , byte ( 0 ) )
if index >= len ( rs . Data ) {
2024-09-10 05:23:07 +03:00
return fail ( ctx , "Protocol: format error" , "pkt-line: format error %s" , rs . Data )
2021-07-28 12:42:56 +03:00
}
if index < 0 {
if len ( rs . Data ) == 10 && rs . Data [ 9 ] == '\n' {
index = 9
} else {
2024-09-10 05:23:07 +03:00
return fail ( ctx , "Protocol: format error" , "pkt-line: format error %s" , rs . Data )
2021-07-28 12:42:56 +03:00
}
}
if string ( rs . Data [ 0 : index ] ) != VersionHead {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return fail ( ctx , "Protocol: version error" , "Received unsupported version: %s" , string ( rs . Data [ 0 : index ] ) )
2021-07-28 12:42:56 +03:00
}
requestOptions = strings . Split ( string ( rs . Data [ index + 1 : ] ) , " " )
for _ , option := range requestOptions {
if strings . HasPrefix ( option , "push-options" ) {
response = append ( response , byte ( 0 ) )
response = append ( response , [ ] byte ( "push-options" ) ... )
hasPushOptions = true
}
}
response = append ( response , '\n' )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
_ , err = readPktLine ( ctx , reader , pktLineTypeFlush )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , response )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeFlushPktLine ( ctx , os . Stdout )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
// 2. receive commands from server.
// S: PKT-LINE(<old-oid> <new-oid> <ref>)
// S: ... ...
// S: flush-pkt
// # [receive push-options]
// S: PKT-LINE(push-option)
// S: ... ...
// S: flush-pkt
hookOptions := private . HookOptions {
UserName : pusherName ,
UserID : pusherID ,
}
hookOptions . OldCommitIDs = make ( [ ] string , 0 , hookBatchSize )
hookOptions . NewCommitIDs = make ( [ ] string , 0 , hookBatchSize )
2023-05-26 04:04:48 +03:00
hookOptions . RefFullNames = make ( [ ] git . RefName , 0 , hookBatchSize )
2021-07-28 12:42:56 +03:00
for {
// note: pktLineTypeUnknow means pktLineTypeFlush and pktLineTypeData all allowed
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
rs , err = readPktLine ( ctx , reader , pktLineTypeUnknow )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
if rs . Type == pktLineTypeFlush {
break
}
t := strings . SplitN ( string ( rs . Data ) , " " , 3 )
if len ( t ) != 3 {
continue
}
hookOptions . OldCommitIDs = append ( hookOptions . OldCommitIDs , t [ 0 ] )
hookOptions . NewCommitIDs = append ( hookOptions . NewCommitIDs , t [ 1 ] )
2023-05-26 04:04:48 +03:00
hookOptions . RefFullNames = append ( hookOptions . RefFullNames , git . RefName ( t [ 2 ] ) )
2021-07-28 12:42:56 +03:00
}
hookOptions . GitPushOptions = make ( map [ string ] string )
if hasPushOptions {
for {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
rs , err = readPktLine ( ctx , reader , pktLineTypeUnknow )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
if rs . Type == pktLineTypeFlush {
break
}
kv := strings . SplitN ( string ( rs . Data ) , "=" , 2 )
if len ( kv ) == 2 {
hookOptions . GitPushOptions [ kv [ 0 ] ] = kv [ 1 ]
}
}
}
// 3. run hook
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
resp , extra := private . HookProcReceive ( ctx , repoUser , repoName , hookOptions )
if extra . HasError ( ) {
return fail ( ctx , extra . UserMsg , "HookProcReceive failed: %v" , extra . Error )
2021-07-28 12:42:56 +03:00
}
// 4. response result to service
// # a. OK, but has an alternate reference. The alternate reference name
// # and other status can be given in option directives.
// H: PKT-LINE(ok <ref>)
// H: PKT-LINE(option refname <refname>)
// H: PKT-LINE(option old-oid <old-oid>)
// H: PKT-LINE(option new-oid <new-oid>)
// H: PKT-LINE(option forced-update)
// H: ... ...
// H: flush-pkt
// # b. NO, I reject it.
// H: PKT-LINE(ng <ref> <reason>)
// # c. Fall through, let 'receive-pack' to execute it.
// H: PKT-LINE(ok <ref>)
// H: PKT-LINE(option fall-through)
for _ , rs := range resp . Results {
if len ( rs . Err ) > 0 {
2023-05-26 04:04:48 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "ng " + rs . OriginalRef . String ( ) + " " + rs . Err ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
continue
}
if rs . IsNotMatched {
2023-05-26 04:04:48 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "ok " + rs . OriginalRef . String ( ) ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "option fall-through" ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
continue
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "ok " + rs . OriginalRef ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "option refname " + rs . Ref ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
2023-12-19 10:20:47 +03:00
commitID , _ := git . NewIDFromString ( rs . OldOID )
2023-12-14 00:02:00 +03:00
if ! commitID . IsZero ( ) {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "option old-oid " + rs . OldOID ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "option new-oid " + rs . NewOID ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
if rs . IsForcePush {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeDataPktLine ( ctx , os . Stdout , [ ] byte ( "option forced-update" ) )
2021-07-28 12:42:56 +03:00
if err != nil {
return err
}
}
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
err = writeFlushPktLine ( ctx , os . Stdout )
2021-07-28 12:42:56 +03:00
2024-04-09 06:43:17 +03:00
if err == nil {
for _ , res := range resp . Results {
hookPrintResult ( res . ShouldShowMessage , res . IsCreatePR , res . HeadBranch , res . URL )
}
}
2021-07-28 12:42:56 +03:00
return err
}
// git PKT-Line api
// pktLineType message type of pkt-line
type pktLineType int64
const (
// UnKnow type
pktLineTypeUnknow pktLineType = 0
// flush-pkt "0000"
pktLineTypeFlush pktLineType = iota
// data line
pktLineTypeData
)
// gitPktLine pkt-line api
type gitPktLine struct {
Type pktLineType
Length uint64
Data [ ] byte
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
func readPktLine ( ctx context . Context , in * bufio . Reader , requestType pktLineType ) ( * gitPktLine , error ) {
2021-07-28 12:42:56 +03:00
var (
err error
r * gitPktLine
)
// read prefix
lengthBytes := make ( [ ] byte , 4 )
for i := 0 ; i < 4 ; i ++ {
lengthBytes [ i ] , err = in . ReadByte ( )
if err != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return nil , fail ( ctx , "Protocol: stdin error" , "Pkt-Line: read stdin failed : %v" , err )
2021-07-28 12:42:56 +03:00
}
}
r = new ( gitPktLine )
r . Length , err = strconv . ParseUint ( string ( lengthBytes ) , 16 , 32 )
if err != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return nil , fail ( ctx , "Protocol: format parse error" , "Pkt-Line format is wrong :%v" , err )
2021-07-28 12:42:56 +03:00
}
if r . Length == 0 {
if requestType == pktLineTypeData {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return nil , fail ( ctx , "Protocol: format data error" , "Pkt-Line format is wrong" )
2021-07-28 12:42:56 +03:00
}
r . Type = pktLineTypeFlush
return r , nil
}
if r . Length <= 4 || r . Length > 65520 || requestType == pktLineTypeFlush {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return nil , fail ( ctx , "Protocol: format length error" , "Pkt-Line format is wrong" )
2021-07-28 12:42:56 +03:00
}
r . Data = make ( [ ] byte , r . Length - 4 )
for i := range r . Data {
r . Data [ i ] , err = in . ReadByte ( )
if err != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
return nil , fail ( ctx , "Protocol: data error" , "Pkt-Line: read stdin failed : %v" , err )
2021-07-28 12:42:56 +03:00
}
}
r . Type = pktLineTypeData
return r , nil
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
func writeFlushPktLine ( ctx context . Context , out io . Writer ) error {
2021-07-28 12:42:56 +03:00
l , err := out . Write ( [ ] byte ( "0000" ) )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
if err != nil || l != 4 {
return fail ( ctx , "Protocol: write error" , "Pkt-Line response failed: %v" , err )
2021-07-28 12:42:56 +03:00
}
return nil
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
func writeDataPktLine ( ctx context . Context , out io . Writer , data [ ] byte ) error {
2021-07-28 12:42:56 +03:00
hexchar := [ ] byte ( "0123456789abcdef" )
hex := func ( n uint64 ) byte {
return hexchar [ ( n ) & 15 ]
}
length := uint64 ( len ( data ) + 4 )
tmp := make ( [ ] byte , 4 )
tmp [ 0 ] = hex ( length >> 12 )
tmp [ 1 ] = hex ( length >> 8 )
tmp [ 2 ] = hex ( length >> 4 )
tmp [ 3 ] = hex ( length )
lr , err := out . Write ( tmp )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
if err != nil || lr != 4 {
return fail ( ctx , "Protocol: write error" , "Pkt-Line response failed: %v" , err )
2021-07-28 12:42:56 +03:00
}
lr , err = out . Write ( data )
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687)
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 09:32:26 +03:00
if err != nil || int ( length - 4 ) != lr {
return fail ( ctx , "Protocol: write error" , "Pkt-Line response failed: %v" , err )
2021-07-28 12:42:56 +03:00
}
return nil
}