IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is a large and complex PR, so let me explain in detail its changes.
First, I had to create new index mappings for Bleve and ElasticSerach as
the current ones do not support search by filename. This requires Gitea
to recreate the code search indexes (I do not know if this is a breaking
change, but I feel it deserves a heads-up).
I've used [this
approach](https://www.elastic.co/guide/en/elasticsearch/reference/7.17/analysis-pathhierarchy-tokenizer.html)
to model the filename index. It allows us to efficiently search for both
the full path and the name of a file. Bleve, however, does not support
this out-of-box, so I had to code a brand new [token
filter](https://blevesearch.com/docs/Token-Filters/) to generate the
search terms.
I also did an overhaul in the `indexer_test.go` file. It now asserts the
order of the expected results (this is important since matches based on
the name of a file are more relevant than those based on its content).
I've added new test scenarios that deal with searching by filename. They
use a new repo included in the Gitea fixture.
The screenshot below depicts how Gitea shows the search results. It
shows results based on content in the same way as the current version
does. In matches based on the filename, the first seven lines of the
file contents are shown (BTW, this is how GitHub does it).
Resolves#32096
---------
Signed-off-by: Bruno Sofiato <bruno.sofiato@gmail.com>
This will allow instance admins to view signup pattern patterns for
public instances. It is modelled after discourse, mastodon, and
MediaWiki's approaches.
Note: This has privacy implications, but as the above-stated open-source
projects take this approach, especially MediaWiki, which I have no doubt
looked into this thoroughly, it is likely okay for us, too. However, I
would be appreciative of any feedback on how this could be improved.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
### Notes on updating permissions
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
We have some instances that only allow using an external authentication
source for authentication. In this case, users changing their email,
password, or linked OpenID connections will not have any effect, and
we'd like to prevent showing that to them to prevent confusion.
Included in this are several changes to support this:
* A new setting to disable user managed authentication credentials
(email, password & OpenID connections)
* A new setting to disable user managed MFA (2FA codes & WebAuthn)
* Fix an issue where some templates had separate logic for determining
if a feature was disabled since it didn't check the globally disabled
features
* Hide more user setting pages in the navbar when their settings aren't
enabled
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Before we had just the plain mail address as recipient. But now we
provide additional Information for the Mail clients.
---
*Sponsored by Kithara Software GmbH*
Fix#31361, and add tests
And this PR introduces an undocumented & debug-purpose-only config
option: `USE_SUB_URL_PATH`. It does nothing for end users, it only helps
the development of sub-path related problems.
And also fix#31366
Co-authored-by: @ExplodingDragon
Remove "EncodeSha1", it shouldn't be used as a general purpose hasher
(just like we have removed "EncodeMD5" in #28622)
Rewrite the "time-limited code" related code and write better tests, the
old code doesn't seem quite right.
Suggested by logs in #30729
- Remove `math/rand.Seed`
`rand.Seed is deprecated: As of Go 1.20 there is no reason to call Seed
with a random value.`
- Replace `math/rand.Read`
`rand.Read is deprecated: For almost all use cases, [crypto/rand.Read]
is more appropriate.`
- Replace `math/rand` with `math/rand/v2`, which is available since Go
1.22
Follow #30454
And fix#24957
When using "preferred_username", if no such field,
`extractUserNameFromOAuth2` (old `getUserName`) shouldn't return an
error. All other USERNAME options do not return such error.
And fine tune some logic and error messages, make code more stable and
more friendly to end users.
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
1. check `IsActive` before calling `IsLastAdminUser`.
2. Fix some comments and error messages.
3. Don't `return err` if "removing file" fails in `DeleteUser`.
4. Remove incorrect `DeleteInactiveEmailAddresses`. Active users could
also have inactive emails, and inactive emails do not support
"olderThan"
5. Add tests
## Changes
- Adds setting `EXTERNAL_USER_DISABLE_FEATURES` to disable any supported
user features when login type is not plain
- In general, this is necessary for SSO implementations to avoid
inconsistencies between the external account management and the linked
account
- Adds helper functions to encourage correct use
just some refactoring bits towards replacing **util.OptionalBool** with
**optional.Option[bool]**
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Thanks to inferenceus : some sort orders on the "explore/users" page
could list users by their lastlogintime/updatetime.
It leaks user's activity unintentionally. This PR makes that page only
use "supported" sort orders.
Removing the "sort orders" could also be a good solution, while IMO at
the moment keeping the "create time" and "name" orders is also fine, in
case some users would like to find a target user in the search result,
the "sort order" might help.
Fix#14459
The following users can add/remove review requests of a PR
- the poster of the PR
- the owner or collaborators of the repository
- members with read permission on the pull requests unit
Commit 360b3fd17c (Include username in email headers (#28981),
2024-02-03) adds usernames to the From field of notification emails in
the form of `Display Name (@username)`, to prevent spoofing. However,
some email filtering software flags "@" in the display name part of the
From field as potential spoofing, as you could set the display name part
to another email address than the one you are sending from (e.g.
`From: "apparent@email-address" <actual@email-address>`). To avoid
being flagged, instead send emails from `Display Name (username)`.
Closes: #29107
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Emails from Gitea comments do not contain the username of the commenter
anywhere, only their display name, so it is not possible to verify who
made a comment from the email itself:
From: "Alice" <email@gitea>
X-Gitea-Sender: Alice
X-Gitea-Recipient: Bob
X-GitHub-Sender: Alice
X-GitHub-Recipient: Bob
This comment looks like it's from @alice.
The X-Gitea/X-GitHub headers also use display names, which is not very
reliable for filtering, and inconsistent with GitHub's behavior:
X-GitHub-Sender: lunny
X-GitHub-Recipient: gwymor
This change includes both the display name and username in the From
header, and switches the other headers from display name to username:
From: "Alice (@fakealice)" <email@gitea>
X-Gitea-Sender: fakealice
X-Gitea-Recipient: bob
X-GitHub-Sender: fakealice
X-GitHub-Recipient: bob
This comment looks like it's from @alice.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
