shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-22 17:34:18 +03:00
Code Releases Activity
415cc5c064
libvirt/tests/qemuxml2argvdata/net-vhostuser-multiq.args

46 lines
1.6 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 19:19:48 +03:00
/usr/bin/qemu-system-i686 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 17:29:41 +03:00
-name QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-m 214 \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 14:29:16 +03:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 17:29:52 +03:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-no-user-config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 17:40:39 +03:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 01:04:58 +03:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-no-shutdown \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-no-acpi \
-boot c \
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 17:13:52 +03:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
qemu: assume -drive argument is always available As of QEMU 0.9.1 the -drive argument can be used to configure all disks, so the QEMU driver can assume it is always available and drop support for -hda/-cdrom/etc. Many of the tests need updating because a great many were running without CAPS_DRIVE set, so using the -hda legacy syntax. Fixing the tests uncovered a bug in the argv -> xml convertor which failed to handle disk with if=floppy. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 17:28:57 +03:00
-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \
qemu: add multiqueue vhost-user support This patch adds the support of queues attribute of the driver element for vhost-user interface type. Example: <interface type='vhostuser'> <mac address='52:54:00:ee:96:6d'/> <source type='unix' path='/tmp/vhost2.sock' mode='client'/> <model type='virtio'/> <driver queues='4'/> </interface> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207692 Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com> Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-26 14:45:57 +03:00
-chardev socket,id=charnet0,path=/tmp/vhost0.sock,server \
qemuBuildHostNetStr: Support VIR_DOMAIN_NET_TYPE_VHOSTUSER https://bugzilla.redhat.com/show_bug.cgi?id=1366505 So far, this function lacked support for VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the problem by constructing the command line on their own. This is not ideal as it blocks hot plug support. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-08-16 13:55:02 +03:00
-netdev vhost-user,chardev=charnet0,id=hostnet0 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:ee:96:6b,bus=pci.0,\
addr=0x3 \
qemu: add multiqueue vhost-user support This patch adds the support of queues attribute of the driver element for vhost-user interface type. Example: <interface type='vhostuser'> <mac address='52:54:00:ee:96:6d'/> <source type='unix' path='/tmp/vhost2.sock' mode='client'/> <model type='virtio'/> <driver queues='4'/> </interface> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207692 Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com> Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-26 14:45:57 +03:00
-chardev socket,id=charnet1,path=/tmp/vhost1.sock \
qemuBuildHostNetStr: Support VIR_DOMAIN_NET_TYPE_VHOSTUSER https://bugzilla.redhat.com/show_bug.cgi?id=1366505 So far, this function lacked support for VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the problem by constructing the command line on their own. This is not ideal as it blocks hot plug support. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-08-16 13:55:02 +03:00
-netdev vhost-user,chardev=charnet1,id=hostnet1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-device virtio-net-pci,netdev=hostnet1,id=net1,mac=52:54:00:ee:96:6c,bus=pci.0,\
addr=0x4 \
qemu: add multiqueue vhost-user support This patch adds the support of queues attribute of the driver element for vhost-user interface type. Example: <interface type='vhostuser'> <mac address='52:54:00:ee:96:6d'/> <source type='unix' path='/tmp/vhost2.sock' mode='client'/> <model type='virtio'/> <driver queues='4'/> </interface> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207692 Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com> Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-26 14:45:57 +03:00
-netdev socket,listen=:2015,id=hostnet2 \
test-wrap-argv: set cutoff at 78 characters For every but the last argument, we also need space for a space and a backslash. Rewrap everything longer than 78 characters.
2016-07-11 17:27:53 +03:00
-device rtl8139,netdev=hostnet2,id=net2,mac=52:54:00:95:db:c0,bus=pci.0,\
addr=0x5 \
vhost-user: add support reconnect for vhost-user ports For vhost-user ports, Open vSwitch acts as the server and QEMU the client. When OVS crashes or restarts, the QEMU process should be reconnected to OVS. Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-01-17 19:14:06 +03:00
-chardev socket,id=charnet3,path=/tmp/vhost2.sock,reconnect=10 \
-netdev vhost-user,chardev=charnet3,id=hostnet3 \
-device virtio-net-pci,netdev=hostnet3,id=net3,mac=52:54:00:ee:96:6d,bus=pci.0,\
addr=0x6 \
-chardev socket,id=charnet4,path=/tmp/vhost3.sock,reconnect=0 \
-netdev vhost-user,chardev=charnet4,queues=4,id=hostnet4 \
-device virtio-net-pci,mq=on,vectors=10,netdev=hostnet4,id=net4,\
mac=52:54:00:ee:96:6e,bus=pci.0,addr=0x7
Copy Permalink