2013-07-12 14:13:04 +04:00
/*
2014-03-17 13:38:38 +04:00
* Copyright ( C ) 2013 , 2014 Red Hat , Inc .
2013-07-12 14:13:04 +04:00
*
* This library is free software ; you can redistribute it and / or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation ; either
* version 2.1 of the License , or ( at your option ) any later version .
*
* This library is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the GNU
* Lesser General Public License for more details .
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library . If not , see
* < http : //www.gnu.org/licenses/>.
*
* Author : Daniel P . Berrange < berrange @ redhat . com >
*/
# include <config.h>
# include <stdlib.h>
# include "virdbuspriv.h"
# include "virlog.h"
# include "testutils.h"
2014-02-28 16:16:17 +04:00
VIR_LOG_INIT ( " tests.dbustest " ) ;
2013-07-12 14:13:04 +04:00
# define VERIFY(typname, valorig, valnew, fmt) \
do { \
VIR_DEBUG ( " Compare " typname " ' " fmt " ' to ' " \
fmt " ' " , valorig , valnew ) ; \
if ( valorig ! = valnew ) { \
fprintf ( stderr , " Failed to round-trip " typname " ' " \
fmt " ' to ' " fmt " ' \n " , valorig , valnew ) ; \
goto cleanup ; \
} \
} while ( 0 )
# define VERIFY_STR(typname, valorig, valnew, fmt) \
do { \
VIR_DEBUG ( " Compare " typname " ' " fmt " ' to ' " \
fmt " ' " , valorig , valnew ) ; \
if ( STRNEQ ( valorig , valnew ) ) { \
fprintf ( stderr , " Failed to round-trip " typname " ' " \
fmt " ' to ' " fmt " ' \n " , valorig , valnew ) ; \
goto cleanup ; \
} \
} while ( 0 )
static int testMessageSimple ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
unsigned char in_byte = 200 , out_byte = 0 ;
2014-11-18 03:18:58 +03:00
bool in_bool = true , out_bool = false ;
2013-07-29 20:29:00 +04:00
short in_int16 = 0xfefe , out_int16 = 0 ;
unsigned short in_uint16 = 32000 , out_uint16 = 0 ;
2013-07-12 14:13:04 +04:00
int in_int32 = 100000000 , out_int32 = 0 ;
unsigned int in_uint32 = 200000000 , out_uint32 = 0 ;
2013-08-09 17:42:06 +04:00
long long in_int64 = 1000000000000LL , out_int64 = 0 ;
unsigned long long in_uint64 = 2000000000000LL , out_uint64 = 0 ;
2014-08-26 02:26:56 +04:00
double in_double = 3.14159265359 , out_double = 0 ;
2013-07-12 14:13:04 +04:00
const char * in_string = " Hello World " ;
char * out_string = NULL ;
const char * in_objectpath = " /org/libvirt/test " ;
char * out_objectpath = NULL ;
const char * in_signature = " ybnqiuxtdsog " ;
char * out_signature = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" ybnqiuxtdsog " ,
in_byte , in_bool ,
in_int16 , in_uint16 ,
in_int32 , in_uint32 ,
in_int64 , in_uint64 ,
in_double , in_string ,
in_objectpath , in_signature ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" ybnqiuxtdsog " ,
& out_byte , & out_bool ,
& out_int16 , & out_uint16 ,
& out_int32 , & out_uint32 ,
& out_int64 , & out_uint64 ,
& out_double , & out_string ,
& out_objectpath , & out_signature ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
VERIFY ( " byte " , in_byte , out_byte , " %d " ) ;
VERIFY ( " bool " , in_bool , out_bool , " %d " ) ;
VERIFY ( " int16 " , in_int16 , out_int16 , " %d " ) ;
VERIFY ( " uint16 " , in_int16 , out_int16 , " %d " ) ;
VERIFY ( " int32 " , in_int32 , out_int32 , " %d " ) ;
VERIFY ( " uint32 " , in_int32 , out_int32 , " %d " ) ;
VERIFY ( " int64 " , in_int64 , out_int64 , " %lld " ) ;
VERIFY ( " uint64 " , in_int64 , out_int64 , " %lld " ) ;
VERIFY ( " double " , in_double , out_double , " %lf " ) ;
VERIFY_STR ( " string " , in_string , out_string , " %s " ) ;
VERIFY_STR ( " objectpath " , in_objectpath , out_objectpath , " %s " ) ;
VERIFY_STR ( " signature " , in_signature , out_signature , " %s " ) ;
ret = 0 ;
2014-03-25 10:53:44 +04:00
cleanup :
2013-07-12 14:13:04 +04:00
VIR_FREE ( out_string ) ;
VIR_FREE ( out_signature ) ;
VIR_FREE ( out_objectpath ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
2013-07-12 14:13:04 +04:00
return ret ;
}
static int testMessageVariant ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_str1 = " Hello " ;
int in_int32 = 100000000 , out_int32 = 0 ;
const char * in_str2 = " World " ;
char * out_str1 = NULL , * out_str2 = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" svs " ,
in_str1 ,
" i " , in_int32 ,
in_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" svs " ,
& out_str1 ,
" i " , & out_int32 ,
& out_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
VERIFY_STR ( " str1 " , in_str1 , out_str1 , " %s " ) ;
VERIFY ( " int32 " , in_int32 , out_int32 , " %d " ) ;
VERIFY_STR ( " str2 " , in_str2 , out_str2 , " %s " ) ;
ret = 0 ;
2014-03-25 10:53:44 +04:00
cleanup :
2013-07-12 14:13:04 +04:00
VIR_FREE ( out_str1 ) ;
VIR_FREE ( out_str2 ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
2013-07-12 14:13:04 +04:00
return ret ;
}
static int testMessageArray ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_str1 = " Hello " ;
2013-08-09 18:55:06 +04:00
int in_int32a = 1000000000 , out_int32a = 0 ;
int in_int32b = 2000000000 , out_int32b = 0 ;
int in_int32c = - 2000000000 , out_int32c = 0 ;
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
bool in_bool [ ] = { true , false , true } , out_bool [ ] = { false , true , false } ;
2013-07-12 14:13:04 +04:00
const char * in_str2 = " World " ;
char * out_str1 = NULL , * out_str2 = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
" saiabs " ,
2013-07-12 14:13:04 +04:00
in_str1 ,
virdbustest: Don't pass number of arguments as long long
since sizeof(int) != sizeof(long long) on 32bit archs.
This unbreaks virdbustest which otherwise fails like:
(gdb) bt
#0 __strlen_sse2_bsf () at ../sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S:50
#1 0x405907d2 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
#2 0x4057c140 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
#3 0x4057e7ec in dbus_message_iter_append_basic () from /lib/i386-linux-gnu/libdbus-1.so.3
#4 0x400742ec in virDBusMessageIterEncode (args=0xbfd4b8f0 "k\321\004\b.", types=0x804d260 "",
rootiter=0xbfd4b844) at util/virdbus.c:560
#5 virDBusMessageEncodeArgs (msg=msg@entry=0x893c278, types=types@entry=0x804d25c "sais",
args=args@entry=0xbfd4b8d8 "r\320\004\b\003") at util/virdbus.c:921
#6 0x40075917 in virDBusMessageEncode (msg=0x893c278, types=0x804d25c "sais") at util/virdbus.c:959
#7 0x0804a4a1 in testMessageArray (args=0x0) at virdbustest.c:195
#8 0x0804c404 in virtTestRun (title=title@entry=0x804cfcb "Test message array ",
nloops=nloops@entry=1, body=body@entry=0x804a3f0 <testMessageArray>, data=data@entry=0x0)
at testutils.c:168
#9 0x08049346 in mymain () at virdbustest.c:384
#10 0x0804cb2e in virtTestMain (argc=argc@entry=1, argv=argv@entry=0xbfd4bb24,
func=func@entry=0x80492c0 <mymain>) at testutils.c:764
#11 0x080491af in main (argc=1, argv=0xbfd4bb24) at virdbustest.c:393
2013-07-25 01:19:43 +04:00
3 , in_int32a , in_int32b , in_int32c ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
3 , in_bool [ 0 ] , in_bool [ 1 ] , in_bool [ 2 ] ,
2013-07-12 14:13:04 +04:00
in_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
" saiabs " ,
2013-07-12 14:13:04 +04:00
& out_str1 ,
3 , & out_int32a , & out_int32b , & out_int32c ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
3 , & out_bool [ 0 ] , & out_bool [ 1 ] , & out_bool [ 2 ] ,
2013-07-12 14:13:04 +04:00
& out_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
VERIFY_STR ( " str1 " , in_str1 , out_str1 , " %s " ) ;
VERIFY ( " int32a " , in_int32a , out_int32a , " %d " ) ;
VERIFY ( " int32b " , in_int32b , out_int32b , " %d " ) ;
VERIFY ( " int32c " , in_int32c , out_int32c , " %d " ) ;
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
VERIFY ( " bool[0] " , in_bool [ 0 ] , out_bool [ 0 ] , " %d " ) ;
VERIFY ( " bool[1] " , in_bool [ 1 ] , out_bool [ 1 ] , " %d " ) ;
VERIFY ( " bool[2] " , in_bool [ 2 ] , out_bool [ 2 ] , " %d " ) ;
2013-07-12 14:13:04 +04:00
VERIFY_STR ( " str2 " , in_str2 , out_str2 , " %s " ) ;
ret = 0 ;
2014-03-25 10:53:44 +04:00
cleanup :
2013-07-12 14:13:04 +04:00
VIR_FREE ( out_str1 ) ;
VIR_FREE ( out_str2 ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
2013-07-12 14:13:04 +04:00
return ret ;
}
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
static int testMessageEmptyArrayRef ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_strv1 [ ] = { } ;
size_t out_nstrv1 ;
char * * out_strv1 = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" a&s " ,
0 , in_strv1 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" a&s " ,
& out_nstrv1 , & out_strv1 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
if ( out_nstrv1 ! = 0 ) {
fprintf ( stderr , " Expected 0 string, but got %zu \n " ,
out_nstrv1 ) ;
goto cleanup ;
}
ret = 0 ;
cleanup :
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
return ret ;
}
static int testMessageSingleArrayRef ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_strv1 [ ] = {
" Fishfood " ,
} ;
char * * out_strv1 = NULL ;
size_t out_nstrv1 = 0 ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" a&s " ,
1 , in_strv1 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" a&s " ,
& out_nstrv1 , & out_strv1 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
if ( out_nstrv1 ! = 1 ) {
fprintf ( stderr , " Expected 1 string, but got %zu \n " ,
out_nstrv1 ) ;
goto cleanup ;
}
VERIFY_STR ( " strv1[0] " , in_strv1 [ 0 ] , out_strv1 [ 0 ] , " %s " ) ;
ret = 0 ;
cleanup :
if ( out_strv1 )
VIR_FREE ( out_strv1 [ 0 ] ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
return ret ;
}
2014-03-13 19:38:18 +04:00
static int testMessageArrayRef ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_str1 = " Hello " ;
int in_int32 [ ] = {
100000000 , 2000000000 , - 2000000000
} ;
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
bool in_bool [ ] = { true , false , true } ;
2014-03-13 19:38:18 +04:00
const char * in_strv1 [ ] = {
" Fishfood " ,
} ;
const char * in_strv2 [ ] = {
" Hello " , " World " ,
} ;
int * out_int32 = NULL ;
size_t out_nint32 = 0 ;
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
bool * out_bool = NULL ;
size_t out_nbool = 0 ;
2014-03-13 19:38:18 +04:00
char * * out_strv1 = NULL ;
char * * out_strv2 = NULL ;
size_t out_nstrv1 = 0 ;
size_t out_nstrv2 = 0 ;
const char * in_str2 = " World " ;
char * out_str1 = NULL , * out_str2 = NULL ;
2014-03-31 01:35:56 +04:00
size_t i ;
2014-03-13 19:38:18 +04:00
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
" sa&sa&ia&ba&ss " ,
2014-03-13 19:38:18 +04:00
in_str1 ,
1 , in_strv1 ,
3 , in_int32 ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
3 , in_bool ,
2014-03-13 19:38:18 +04:00
2 , in_strv2 ,
in_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
" sa&sa&ia&ba&ss " ,
2014-03-13 19:38:18 +04:00
& out_str1 ,
& out_nstrv1 , & out_strv1 ,
& out_nint32 , & out_int32 ,
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
& out_nbool , & out_bool ,
2014-03-13 19:38:18 +04:00
& out_nstrv2 , & out_strv2 ,
& out_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
VERIFY_STR ( " str1 " , in_str1 , out_str1 , " %s " ) ;
if ( out_nstrv1 ! = 1 ) {
fprintf ( stderr , " Expected 1 string, but got %zu \n " ,
out_nstrv1 ) ;
goto cleanup ;
}
VERIFY_STR ( " strv1[0] " , in_strv1 [ 0 ] , out_strv1 [ 0 ] , " %s " ) ;
if ( out_nint32 ! = 3 ) {
fprintf ( stderr , " Expected 3 integers, but got %zu \n " ,
out_nint32 ) ;
goto cleanup ;
}
VERIFY ( " int32a " , in_int32 [ 0 ] , out_int32 [ 0 ] , " %d " ) ;
VERIFY ( " int32b " , in_int32 [ 1 ] , out_int32 [ 1 ] , " %d " ) ;
VERIFY ( " int32c " , in_int32 [ 2 ] , out_int32 [ 2 ] , " %d " ) ;
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
if ( out_nbool ! = 3 ) {
fprintf ( stderr , " Expected 3 bools, but got %zu \n " ,
out_nbool ) ;
goto cleanup ;
}
VERIFY ( " bool[0] " , in_bool [ 0 ] , out_bool [ 0 ] , " %d " ) ;
VERIFY ( " bool[1] " , in_bool [ 1 ] , out_bool [ 1 ] , " %d " ) ;
VERIFY ( " bool[2] " , in_bool [ 2 ] , out_bool [ 2 ] , " %d " ) ;
2014-03-13 19:38:18 +04:00
if ( out_nstrv2 ! = 2 ) {
fprintf ( stderr , " Expected 2 strings, but got %zu \n " ,
out_nstrv2 ) ;
goto cleanup ;
}
VERIFY_STR ( " strv2[0] " , in_strv2 [ 0 ] , out_strv2 [ 0 ] , " %s " ) ;
VERIFY_STR ( " strv2[1] " , in_strv2 [ 1 ] , out_strv2 [ 1 ] , " %s " ) ;
VERIFY_STR ( " str2 " , in_str2 , out_str2 , " %s " ) ;
ret = 0 ;
2014-03-25 10:53:44 +04:00
cleanup :
2014-03-13 19:38:18 +04:00
VIR_FREE ( out_int32 ) ;
dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-22 03:03:34 +03:00
VIR_FREE ( out_bool ) ;
2014-03-13 19:38:18 +04:00
VIR_FREE ( out_str1 ) ;
VIR_FREE ( out_str2 ) ;
2014-03-31 01:35:56 +04:00
for ( i = 0 ; i < out_nstrv1 ; i + + )
VIR_FREE ( out_strv1 [ i ] ) ;
VIR_FREE ( out_strv1 ) ;
for ( i = 0 ; i < out_nstrv2 ; i + + )
VIR_FREE ( out_strv2 [ i ] ) ;
VIR_FREE ( out_strv2 ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
2014-03-13 19:38:18 +04:00
return ret ;
}
2013-07-12 14:13:04 +04:00
static int testMessageStruct ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
unsigned char in_byte = 200 , out_byte = 0 ;
2014-11-18 03:18:58 +03:00
bool in_bool = true , out_bool = false ;
2013-07-29 20:29:00 +04:00
short in_int16 = 12000 , out_int16 = 0 ;
unsigned short in_uint16 = 32000 , out_uint16 = 0 ;
2013-07-12 14:13:04 +04:00
int in_int32 = 100000000 , out_int32 = 0 ;
unsigned int in_uint32 = 200000000 , out_uint32 = 0 ;
2013-08-09 18:55:06 +04:00
long long in_int64 = - 1000000000000LL , out_int64 = 0 ;
2013-08-09 17:42:06 +04:00
unsigned long long in_uint64 = 2000000000000LL , out_uint64 = 0 ;
2014-08-26 02:26:56 +04:00
double in_double = 3.14159265359 , out_double = 0 ;
2013-07-12 14:13:04 +04:00
const char * in_string = " Hello World " ;
char * out_string = NULL ;
const char * in_objectpath = " /org/libvirt/test " ;
char * out_objectpath = NULL ;
const char * in_signature = " ybnqiuxtdsog " ;
char * out_signature = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" ybn(qiuxtds)og " ,
in_byte , in_bool ,
in_int16 , in_uint16 ,
in_int32 , in_uint32 ,
in_int64 , in_uint64 ,
in_double , in_string ,
in_objectpath , in_signature ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" ybn(qiuxtds)og " ,
& out_byte , & out_bool ,
& out_int16 , & out_uint16 ,
& out_int32 , & out_uint32 ,
& out_int64 , & out_uint64 ,
& out_double , & out_string ,
& out_objectpath , & out_signature ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
VERIFY ( " byte " , in_byte , out_byte , " %d " ) ;
VERIFY ( " bool " , in_bool , out_bool , " %d " ) ;
VERIFY ( " int16 " , in_int16 , out_int16 , " %d " ) ;
VERIFY ( " uint16 " , in_int16 , out_int16 , " %d " ) ;
VERIFY ( " int32 " , in_int32 , out_int32 , " %d " ) ;
VERIFY ( " uint32 " , in_int32 , out_int32 , " %d " ) ;
VERIFY ( " int64 " , in_int64 , out_int64 , " %lld " ) ;
VERIFY ( " uint64 " , in_int64 , out_int64 , " %lld " ) ;
VERIFY ( " double " , in_double , out_double , " %lf " ) ;
VERIFY_STR ( " string " , in_string , out_string , " %s " ) ;
VERIFY_STR ( " objectpath " , in_objectpath , out_objectpath , " %s " ) ;
VERIFY_STR ( " signature " , in_signature , out_signature , " %s " ) ;
ret = 0 ;
2014-03-25 10:53:44 +04:00
cleanup :
2013-07-12 14:13:04 +04:00
VIR_FREE ( out_string ) ;
VIR_FREE ( out_signature ) ;
VIR_FREE ( out_objectpath ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
2013-07-12 14:13:04 +04:00
return ret ;
}
static int testMessageDict ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_str1 = " Hello " ;
int in_int32a = 100000000 , out_int32a = 0 ;
const char * in_key1 = " turnover " ;
int in_int32b = 200000000 , out_int32b = 0 ;
const char * in_key2 = " revenue " ;
int in_int32c = 300000000 , out_int32c = 0 ;
const char * in_key3 = " debt " ;
const char * in_str2 = " World " ;
char * out_str1 = NULL , * out_str2 = NULL ;
char * out_key1 = NULL , * out_key2 = NULL , * out_key3 = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
" (sa{si}s) " ,
2013-07-12 14:13:04 +04:00
in_str1 ,
3 ,
in_key1 , in_int32a ,
in_key2 , in_int32b ,
in_key3 , in_int32c ,
in_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
" (sa{si}s) " ,
2013-07-12 14:13:04 +04:00
& out_str1 ,
3 ,
& out_key1 , & out_int32a ,
& out_key2 , & out_int32b ,
& out_key3 , & out_int32c ,
& out_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments " ) ;
goto cleanup ;
}
VERIFY_STR ( " str1 " , in_str1 , out_str1 , " %s " ) ;
VERIFY ( " int32a " , in_int32a , out_int32a , " %d " ) ;
VERIFY ( " int32b " , in_int32b , out_int32b , " %d " ) ;
VERIFY ( " int32c " , in_int32c , out_int32c , " %d " ) ;
VERIFY_STR ( " key1 " , in_key1 , out_key1 , " %s " ) ;
VERIFY_STR ( " key1 " , in_key2 , out_key2 , " %s " ) ;
VERIFY_STR ( " key1 " , in_key3 , out_key3 , " %s " ) ;
VERIFY_STR ( " str2 " , in_str2 , out_str2 , " %s " ) ;
ret = 0 ;
2014-03-25 10:53:44 +04:00
cleanup :
2013-07-12 14:13:04 +04:00
VIR_FREE ( out_str1 ) ;
VIR_FREE ( out_str2 ) ;
VIR_FREE ( out_key1 ) ;
VIR_FREE ( out_key2 ) ;
VIR_FREE ( out_key3 ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
2013-07-12 14:13:04 +04:00
return ret ;
}
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
static int testMessageDictRef ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_str1 = " Hello " ;
const char * in_strv1 [ ] = {
" Fruit1 " , " Apple " ,
" Fruit2 " , " Orange " ,
" Fruit3 " , " Kiwi " ,
} ;
const char * in_str2 = " World " ;
char * out_str1 = NULL ;
size_t out_nint32 = 0 ;
char * * out_strv1 = NULL ;
char * out_str2 = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" (sa&{ss}s) " ,
in_str1 ,
3 , in_strv1 ,
in_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" (sa&{ss}s) " ,
& out_str1 ,
& out_nint32 ,
& out_strv1 ,
& out_str2 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments: '%s' " , virGetLastErrorMessage ( ) ) ;
goto cleanup ;
}
VERIFY_STR ( " str1 " , in_str1 , out_str1 , " %s " ) ;
VERIFY_STR ( " strv1[0] " , in_strv1 [ 0 ] , out_strv1 [ 0 ] , " %s " ) ;
VERIFY_STR ( " strv1[1] " , in_strv1 [ 1 ] , out_strv1 [ 1 ] , " %s " ) ;
VERIFY_STR ( " strv1[2] " , in_strv1 [ 2 ] , out_strv1 [ 2 ] , " %s " ) ;
VERIFY_STR ( " strv1[3] " , in_strv1 [ 3 ] , out_strv1 [ 3 ] , " %s " ) ;
VERIFY_STR ( " strv1[4] " , in_strv1 [ 4 ] , out_strv1 [ 4 ] , " %s " ) ;
VERIFY_STR ( " strv1[5] " , in_strv1 [ 5 ] , out_strv1 [ 5 ] , " %s " ) ;
VERIFY_STR ( " str2 " , in_str2 , out_str2 , " %s " ) ;
ret = 0 ;
cleanup :
VIR_FREE ( out_str1 ) ;
VIR_FREE ( out_str2 ) ;
if ( out_strv1 ) {
VIR_FREE ( out_strv1 [ 0 ] ) ;
VIR_FREE ( out_strv1 [ 1 ] ) ;
VIR_FREE ( out_strv1 [ 2 ] ) ;
VIR_FREE ( out_strv1 [ 3 ] ) ;
VIR_FREE ( out_strv1 [ 4 ] ) ;
VIR_FREE ( out_strv1 [ 5 ] ) ;
}
VIR_FREE ( out_strv1 ) ;
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
return ret ;
}
static int testMessageEmptyDictRef ( const void * args ATTRIBUTE_UNUSED )
{
DBusMessage * msg = NULL ;
int ret = - 1 ;
const char * in_strv1 [ ] = { } ;
size_t out_nint32 = 0 ;
char * * out_strv1 = NULL ;
if ( ! ( msg = dbus_message_new_method_call ( " org.libvirt.test " ,
" /org/libvirt/test " ,
" org.libvirt.test.astrochicken " ,
" cluck " ) ) ) {
VIR_DEBUG ( " Failed to allocate method call " ) ;
goto cleanup ;
}
if ( virDBusMessageEncode ( msg ,
" a&{ss} " ,
0 , in_strv1 ) < 0 ) {
VIR_DEBUG ( " Failed to encode arguments " ) ;
goto cleanup ;
}
if ( virDBusMessageDecode ( msg ,
" a&{ss} " ,
& out_nint32 ,
& out_strv1 ) < 0 ) {
VIR_DEBUG ( " Failed to decode arguments: '%s' " , virGetLastErrorMessage ( ) ) ;
goto cleanup ;
}
if ( out_nint32 ! = 0 ) {
fprintf ( stderr , " Unexpected dict entries \n " ) ;
goto cleanup ;
}
ret = 0 ;
cleanup :
2016-02-11 13:14:11 +03:00
virDBusMessageUnref ( msg ) ;
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
return ret ;
}
2013-07-12 14:13:04 +04:00
static int
mymain ( void )
{
int ret = 0 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message simple " , testMessageSimple , NULL ) < 0 )
2013-07-12 14:13:04 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message variant " , testMessageVariant , NULL ) < 0 )
2013-07-12 14:13:04 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message array " , testMessageArray , NULL ) < 0 )
2013-07-12 14:13:04 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message array empty ref " , testMessageEmptyArrayRef , NULL ) < 0 )
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message array single ref " , testMessageSingleArrayRef , NULL ) < 0 )
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message array ref " , testMessageArrayRef , NULL ) < 0 )
2014-03-13 19:38:18 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message struct " , testMessageStruct , NULL ) < 0 )
2013-07-12 14:13:04 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message dict " , testMessageDict , NULL ) < 0 )
2013-07-12 14:13:04 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message dict empty ref " , testMessageEmptyDictRef , NULL ) < 0 )
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
ret = - 1 ;
2016-05-26 18:01:50 +03:00
if ( virTestRun ( " Test message dict ref " , testMessageDictRef , NULL ) < 0 )
Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline
virDBusMessageEncode("a{ss}",
3,
"key1", "val1",
"key2", "val2",
"key3", "val3");
virDBusMessageDecode("a{ss}",
3,
&key1, &val1,
&key2, &val2,
&key3, &val3);
This allows them to be passed by reference
const char **dictin = {
"key1", "val1",
"key2", "val2",
"key3", "val3"
};
char **dictout;
size_t ndictout;
virDBusMessageEncode("a&{ss}",
ARRAY_CARDINALITY(dict) / 2,
dictin);
virDBusMessageDecode("a&{ss}",
&ndictout,
&dictout);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-09 18:19:58 +04:00
ret = - 1 ;
2014-03-17 13:38:38 +04:00
return ret = = 0 ? EXIT_SUCCESS : EXIT_FAILURE ;
2013-07-12 14:13:04 +04:00
}
VIRT_TEST_MAIN ( mymain )