shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 21:34:54 +03:00
Code Releases Activity
649a9dd7a4
libvirt/tests/qemuxml2argvdata/event_idx.args

35 lines
1.1 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 19:19:48 +03:00
/usr/bin/qemu-system-x86_64 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 17:29:41 +03:00
-name test \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-S \
-M pc-0.13 \
-m 1024 \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 14:29:16 +03:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 17:29:52 +03:00
-uuid bba65c0e-c049-934f-b6aa-4e2c0582acdf \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-nographic \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-no-user-config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 17:40:39 +03:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-test/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 01:04:58 +03:00
-mon chardev=charmonitor,id=monitor,mode=control \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
-no-acpi \
-boot dc \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 17:13:52 +03:00
-drive file=/var/lib/libvirt/images/f14.img,format=qcow2,if=none,\
id=drive-virtio-disk0 \
tests: split long lines Long lines are harder to read and harder to diff; in fact, if lines get too long (> 1000 bytes), it starts causing issues where git send-email refuses to send patches for the file. I've cleaned up the tests directory in the past (see commits bd6c46f, 3b750d1), but new long lines have been introduced in the meantime. Why 90 instead of 80? Because there were too many tests on the fringe edge, and I didn't want to edit that many files. Add a syntax check to prevent future long lines. * cfg.mk (sc_prohibit_long_lines): New rule. * tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any file with content longer than 90 columns. * tests/storagevolxml2argvdata/*.argv: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-17 21:47:01 +04:00
-device virtio-blk-pci,event_idx=on,scsi=off,bus=pci.0,addr=0x4,\
drive=drive-virtio-disk0,id=virtio-disk0 \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 17:13:52 +03:00
-drive file=/var/lib/libvirt/Fedora-14-x86_64-Live-KDE.iso,format=raw,if=none,\
qemu: command: Move around order of generating -drive arguments Move together sections which are conditionaly executed depending on whether -device will be used together with the -drive.
2017-11-22 12:36:30 +03:00
id=drive-ide0-1-0,media=cdrom,readonly=on \
qemu: support event_idx parameter for virtio disk and net devices In some versions of qemu, both virtio-blk-pci and virtio-net-pci devices can have an event_idx setting that determines some details of event processing. When it is enabled, it "reduces the number of interrupts and exits for the guest". qemu will automatically enable this feature when it is available, but there may be cases where this new feature could actually make performance worse (NB: no such case has been found so far). As a safety switch in case such a situation is encountered in the field, this patch adds a new attribute "event_idx" to the <driver> element of both disk and interface devices. event_idx can be set to "on" (to force event_idx on in case qemu has it disabled by default) or "off" (for force event_idx off). In the case that event_idx support isn't present in qemu, the attribute is ignored (this on the advice of the qemu developer). docs/formatdomain.html.in: document the new flag (marking it as "don't mess with this!" docs/schemas/domain.rng: add event_idx in appropriate places src/conf/domain_conf.[ch]: add event_idx to parser and formatter src/libvirt_private.syms: export virDomainVirtioEventIdx(From|To)String src/qemu/qemu_capabilities.[ch]: detect and report event_idx in disk/net src/qemu/qemu_command.c: add event_idx parameter to qemu commandline when appropriate. tests/qemuxml2argvdata/qemuxml2argv-event_idx.args, tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-13 10:32:45 +04:00
-device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 \
qemu: deprecate QEMU_CAPS_NETDEV This makes qemuDomainSupportsNetdev identical to qemuDomainSupportsNicdev and leaves some code in qemuDomainAttachNetDevice to be cleaned up later. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 00:36:13 +03:00
-netdev user,id=hostnet0 \
-device virtio-net-pci,event_idx=off,netdev=hostnet0,id=net0,\
mac=52:54:00:e5:48:58,bus=pci.0,addr=0x3 \
qemu: support event_idx parameter for virtio disk and net devices In some versions of qemu, both virtio-blk-pci and virtio-net-pci devices can have an event_idx setting that determines some details of event processing. When it is enabled, it "reduces the number of interrupts and exits for the guest". qemu will automatically enable this feature when it is available, but there may be cases where this new feature could actually make performance worse (NB: no such case has been found so far). As a safety switch in case such a situation is encountered in the field, this patch adds a new attribute "event_idx" to the <driver> element of both disk and interface devices. event_idx can be set to "on" (to force event_idx on in case qemu has it disabled by default) or "off" (for force event_idx off). In the case that event_idx support isn't present in qemu, the attribute is ignored (this on the advice of the qemu developer). docs/formatdomain.html.in: document the new flag (marking it as "don't mess with this!" docs/schemas/domain.rng: add event_idx in appropriate places src/conf/domain_conf.[ch]: add event_idx to parser and formatter src/libvirt_private.syms: export virDomainVirtioEventIdx(From|To)String src/qemu/qemu_capabilities.[ch]: detect and report event_idx in disk/net src/qemu/qemu_command.c: add event_idx parameter to qemu commandline when appropriate. tests/qemuxml2argvdata/qemuxml2argv-event_idx.args, tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-13 10:32:45 +04:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
Copy Permalink