libvirt/tests/qemuxml2argvdata/serial-pty.xml

<domain type='qemu'>
  <name>QEMUGuest1</name>
  <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
  <memory unit='KiB'>219136</memory>
  <currentMemory unit='KiB'>219136</currentMemory>
  <vcpu placement='static'>1</vcpu>
  <os>
    <type arch='i686' machine='pc'>hvm</type>
    <boot dev='hd'/>
  </os>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/bin/qemu-system-i686</emulator>
    <disk type='block' device='disk'>
      <driver name='qemu' type='raw'/>
      <source dev='/dev/HostVG/QEMUGuest1'/>
      <target dev='hda' bus='ide'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <controller type='usb' index='0'/>
    <controller type='ide' index='0'/>
    <controller type='pci' index='0' model='pci-root'/>
    <serial type='pty'>
      <target port='0'/>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <memballoon model='none'/>
  </devices>
</domain>
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`<domain type='qemu'>`
			`<name>QEMUGuest1</name>`
			`<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>`
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(memory\\|currentMemory\\|hard_limit\\|soft_limit\\|min_guarantee\\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(capacity\\|allocation\\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/data/.xml: Update all tests. * tests/out/.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise. 2012-02-23 04:48:38 +04:00			`<memory unit='KiB'>219136</memory>`
			`<currentMemory unit='KiB'>219136</currentMemory>`
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs). 2012-05-08 20:04:36 +04:00			`<vcpu placement='static'>1</vcpu>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`<os>`
			`<type arch='i686' machine='pc'>hvm</type>`
			`<boot dev='hd'/>`
			`</os>`
			`<clock offset='utc'/>`
			`<on_poweroff>destroy</on_poweroff>`
			`<on_reboot>restart</on_reboot>`
			`<on_crash>destroy</on_crash>`
			`<devices>`
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com> 2017-04-06 19:19:48 +03:00			`<emulator>/usr/bin/qemu-system-i686</emulator>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`<disk type='block' device='disk'>`
qemu: honor allowDiskFormatProbing when parsing command line My commit 024e9af broke this. 2013-04-29 17:42:45 +04:00			`<driver name='qemu' type='raw'/>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`<source dev='/dev/HostVG/QEMUGuest1'/>`
Add support for -drive QEMU syntax, and virtio bus / disk type 2008-05-09 20:41:19 +04:00			`<target dev='hda' bus='ide'/>`
conf: Introduce new attribute for device address format * src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type. 2012-02-27 14:19:54 +04:00			`<address type='drive' controller='0' bus='0' target='0' unit='0'/>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`</disk>`
domain: add implicit USB controller Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change. 2012-02-08 04:48:25 +04:00			`<controller type='usb' index='0'/>`
Auto-add disk controllers based on defined disks Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already 2010-01-05 16:31:20 +03:00			`<controller type='ide' index='0'/>`
qemu: auto-add pci-root controller for pc machine types <controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating. 2013-04-22 16:16:13 +04:00			`<controller type='pci' index='0' model='pci-root'/>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`<serial type='pty'>`
			`<target port='0'/>`
			`</serial>`
			`<console type='pty'>`
domain conf: Track <console> target type All <console> devices now export a <target> type attribute. QEMU defaults to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen' depending on fullvirt. Understandably there is lots of test fallout. This will be used to differentiate between a serial vs. virtio console for QEMU. Signed-off-by: Cole Robinson <crobinso@redhat.com> 2010-07-22 21:56:21 +04:00			`<target type='serial' port='0'/>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`</console>`
device: cleanup input device code The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> 2016-01-11 14:40:32 +03:00			`<input type='mouse' bus='ps2'/>`
			`<input type='keyboard' bus='ps2'/>`
qemu: parse -device virtio-balloon There are no options to parse here other than the name of the device, and all three possible device names have the same prefix ("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the code is fairly simple. It has been implemented such that it will be easier to add handling for other -device entries that aren't otherwise recognized - just add another "else if (STRPREFIX(opts, ....)" clause. qemuParseCommandLineString() previously would always add a <memballoon model='virtio'/> to every result (the comments erroneously say that it is adding a <memballoon model='none'/>) This has been changed to add model='none', and 84 test case xml's updated accordingly (so that qemuxml2argvtest won't fail). Now that the memballoon device is properly parsed, we can safely add a test for properly ignoring -nodefconfig and -nodefaults. Rather than adding an entire new test case for this (and memballoon), we just randomly pick the clock-utc test and modify it slightly to fulfill the purpose. 2014-06-09 12:11:25 +04:00			`<memballoon model='none'/>`
Implement serial & parallel device support for QEMU driver 2008-04-26 00:46:13 +04:00			`</devices>`
			`</domain>`