shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 01:34:11 +03:00
Code Releases Activity
ad5a9fbb97
libvirt/tests/qemuxml2argvdata/q35-usb2-reorder.args

48 lines
2.3 KiB
Plaintext
Raw Normal View History

qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 15:29:01 +03:00
HOME=/tmp/lib/domain--1-q35-test \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 14:15:07 +03:00
XDG_DATA_HOME=/tmp/lib/domain--1-q35-test/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-q35-test/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-q35-test/.config \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 19:19:48 +03:00
/usr/bin/qemu-system-x86_64 \
qemu: command: Always assume support for '-name guest=' and '-name debug-threads=on' All QEMU versions we support have these and it's very unlikely that they will be removed. Remove the capability checks. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-10 17:39:38 +03:00
-name guest=q35-test,debug-threads=on \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-S \
qemu: Always assume presence of QEMU_CAPS_OBJECT_SECRET The secret object is supported since qemu-2.6 and can't be compiled out. Assume the presence to simplify the code. This enables the use of the secret key for most tests not using real caps. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 18:50:00 +03:00
-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-q35-test/master-key.aes \
qemu: Switch to -accel We currently use -machine accel=XXX which is just a syntax sugar for -accel XXX. The former doesn't allow specifying arguments for accelerator, because all arguments passed to -machine are treated as arguments of machine itself. The -accel argument was introduced in QEMU commit v2.9.0-rc0~70^2~19 and since our minimum required version is newer (2.11.0) we can safely assume its existence and use it without any capability. Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-11-05 11:38:10 +03:00
-machine q35,usb=off,dump-guest-core=off \
-accel tcg \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-m 2048 \
qemu: command: Always assume QEMU_CAPS_OVERCOMMIT Starting with qemu-3.1 we always have the '-overcommit' argument and use it instead of '-realtime'. Remove the capability check and fix all fake-caps tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-10 14:57:26 +03:00
-overcommit mem-lock=off \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 14:29:16 +03:00
-smp 2,sockets=2,cores=1,threads=1 \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-no-user-config \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-nodefaults \
qemu: Always assume QEMU_CAPS_CHARDEV_FD_PASS_COMMANDLINE All qemu versions now support FD passing either directly or via FDset. Assume that we always have this capability so that we can simplify chardev handling in many cases. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-03 15:31:28 +03:00
-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 01:04:58 +03:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 13:51:55 +03:00
-no-shutdown \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-no-acpi \
qemu: command: Always assume 'QEMU_CAPS_BOOT_STRICT' Added by c8a6ae8bb9 in qemu-v1.5.0 and can't be compiled out. Assume that it's present and fix all fake-caps tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-20 17:22:59 +03:00
-boot strict=on \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
conf: allow use of slot 0 in a dmi-to-pci-bridge When support for dmi-to-pci-bridge was added, it was assumed that, just as with the pci-root bus, slot 0 was reserved. This is not the case - it can be used to connect a device just like any other slot, so remove the restriction and update the test cases that auto-assign an address on a dmi-to-pci-bridge.
2016-03-02 23:29:33 +03:00
-device pci-bridge,chassis_nr=56,id=pci.2,bus=pci.1,addr=0x0 \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x1d.0x7 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 11:46:36 +03:00
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x1d \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x1d.0x1 \
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x1d.0x2 \
-device ich9-usb-ehci1,id=usb1,bus=pcie.0,addr=0x1a.0x7 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 11:46:36 +03:00
-device ich9-usb-uhci1,masterbus=usb1.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x1a \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 22:08:49 +03:00
-device ich9-usb-uhci3,masterbus=usb1.0,firstport=4,bus=pcie.0,addr=0x1a.0x2 \
-device ich9-usb-uhci2,masterbus=usb1.0,firstport=2,bus=pcie.0,addr=0x1a.0x1 \
-device ich9-usb-ehci1,id=usb2,bus=pci.2,addr=0x1.0x7 \
-device ich9-usb-uhci3,masterbus=usb2.0,firstport=4,bus=pci.2,addr=0x1.0x2 \
-device ich9-usb-uhci2,masterbus=usb2.0,firstport=2,bus=pci.2,addr=0x1.0x1 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 11:46:36 +03:00
-device ich9-usb-uhci1,masterbus=usb2.0,firstport=0,bus=pci.2,multifunction=on,addr=0x1 \
tests: Force QEMU_CAPS_BLOCKDEV(_HOSTDEV_SCSI) in fake caps tests Until we finish removing the capabilities we need to force them in the tests so that it's obvious that the code changes have no impact. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-07-20 16:37:19 +03:00
-blockdev '{"driver":"host_device","filename":"/dev/HostVG/QEMUGuest1","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-1-format","read-only":false,"driver":"raw","file":"libvirt-1-storage"}' \
-device ide-hd,bus=ide.0,drive=libvirt-1-format,id=sata0-0-0,bootindex=1 \
qemu: command: Always assume QEMU_CAPS_AUDIODEV Generate only new version of the '-audiodev' commandline. The leftover old code and validation will be removed in subsequent patches. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-22 16:36:23 +03:00
-audiodev '{"id":"audio1","driver":"none"}' \
qemuBuildDeviceVideoCmd: Simplify formatting of 'max_outputs' property Since there's no capability to check now, we can simply move the formatting of 'max_outputs' earlier. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-18 18:31:28 +03:00
-device qxl-vga,id=video0,max_outputs=1,ram_size=67108864,vram_size=33554432,bus=pcie.0,addr=0x1 \
qemu: command: Always assume support for '-msg timestamp=on' All supported QEMU versions have this option so there's no need for us to base it on the capability. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-10 18:07:10 +03:00
-msg timestamp=on
Copy Permalink