shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2025-01-26 14:03:49 +03:00
Code Releases Activity
libvirt/tests/qemuxml2argvdata/numatune-memnode.args

38 lines
1.2 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 13:29:01 +01:00
HOME=/tmp/lib/domain--1-QEMUGuest \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 12:15:07 +01:00
XDG_DATA_HOME=/tmp/lib/domain--1-QEMUGuest/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-QEMUGuest/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest/.config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 18:19:48 +02:00
/usr/bin/qemu-system-x86_64 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-m 24105 \
qemu: Always assume QEMU_CAPS_REALTIME_MLOCK The '-realtime mlock' cmd line argument was introduced in QEMU commit v1.5.0-rc0~190 which matches minimal QEMU version we require. Therefore, the capability will always be present. Apparently, nearly none of our xml2argv test cases had the capability hence slightly bigger change under qemuxml2argvdata/. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 10:03:36 +02:00
-realtime mlock=off \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 13:29:16 +02:00
-smp 32,sockets=32,cores=1,threads=1 \
qemu: command: Switch to bytes when formatting size for memory backends QEMU's command line visitor as well as the JSON interface take bytes by default for memory object sizes. Convert mebibytes to bytes so that we can later refactor the existing code for hotplug purposes.
2015-01-15 17:31:31 +01:00
-object memory-backend-ram,id=ram-node0,size=20971520,host-nodes=3,\
policy=preferred \
qemu: pass numa node binding preferences to qemu Currently, we only bind the whole QEMU domain to memory nodes specified in nodemask altogether. That, however, doesn't make much sense when one wants to control from where the memory for particular guest nodes should be allocated. QEMU allows us to do that by specifying 'host-nodes' parameter for the 'memory-backend-ram' object, so let's use that. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-02 11:15:45 +02:00
-numa node,nodeid=0,cpus=0,memdev=ram-node0 \
qemu: command: Switch to bytes when formatting size for memory backends QEMU's command line visitor as well as the JSON interface take bytes by default for memory object sizes. Convert mebibytes to bytes so that we can later refactor the existing code for hotplug purposes.
2015-01-15 17:31:31 +01:00
-object memory-backend-ram,id=ram-node1,size=676331520,host-nodes=0-7,\
policy=bind \
qemu: pass numa node binding preferences to qemu Currently, we only bind the whole QEMU domain to memory nodes specified in nodemask altogether. That, however, doesn't make much sense when one wants to control from where the memory for particular guest nodes should be allocated. QEMU allows us to do that by specifying 'host-nodes' parameter for the 'memory-backend-ram' object, so let's use that. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-02 11:15:45 +02:00
-numa node,nodeid=1,cpus=1-27,cpus=29,memdev=ram-node1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-object memory-backend-ram,id=ram-node2,size=24578621440,host-nodes=1-2,\
host-nodes=5,host-nodes=7,policy=bind \
qemu: pass numa node binding preferences to qemu Currently, we only bind the whole QEMU domain to memory nodes specified in nodemask altogether. That, however, doesn't make much sense when one wants to control from where the memory for particular guest nodes should be allocated. QEMU allows us to do that by specifying 'host-nodes' parameter for the 'memory-backend-ram' object, so let's use that. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-02 11:15:45 +02:00
-numa node,nodeid=2,cpus=28,cpus=30-31,memdev=ram-node2 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid 9f4b6512-e73a-4a25-93e8-5307802821ce \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-no-user-config \
tests: Unconditionally enable QEMU_CAPS_DEVICE QEMU_CAPS_DEVICE is always enabled for qemu binaries we support. Sync qemuxml2* to match, and regenerate all test output.
2016-01-12 19:26:40 -05:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 10:40:39 -04:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 00:04:58 +02:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-no-shutdown \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-no-acpi \
-usb \
tests: Unconditionally enable QEMU_CAPS_DEVICE QEMU_CAPS_DEVICE is always enabled for qemu binaries we support. Sync qemuxml2* to match, and regenerate all test output.
2016-01-12 19:26:40 -05:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Copy Permalink