shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2025-01-11 09:17:52 +03:00
Code Releases Activity
c2195bee24
libvirt/tests/networkxml2firewalldata/nat-ipv6-linux.args

157 lines
3.0 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol tcp \
--destination-port 67 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol udp \
--destination-port 67 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_OUT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--out-interface virbr0 \
--protocol udp \
--destination-port 68 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol tcp \
--destination-port 53 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol udp \
--destination-port 53 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWO \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--jump REJECT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWI \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--out-interface virbr0 \
--jump REJECT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWX \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--out-interface virbr0 \
--jump ACCEPT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWO \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--jump REJECT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWI \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--out-interface virbr0 \
--jump REJECT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWX \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--out-interface virbr0 \
--jump ACCEPT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol tcp \
--destination-port 53 \
--jump ACCEPT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol udp \
--destination-port 53 \
--jump ACCEPT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_INP \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--in-interface virbr0 \
--protocol udp \
--destination-port 547 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWO \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 192.168.122.0/24 \
--in-interface virbr0 \
--jump ACCEPT
iptables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWI \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--destination 192.168.122.0/24 \
--out-interface virbr0 \
--match conntrack \
--ctstate ESTABLISHED,RELATED \
--jump ACCEPT
iptables \
--table nat \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_PRT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 192.168.122.0/24 '!' \
--destination 192.168.122.0/24 \
--jump MASQUERADE
iptables \
--table nat \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_PRT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 192.168.122.0/24 \
-p udp '!' \
--destination 192.168.122.0/24 \
--jump MASQUERADE \
--to-ports 1024-65535
iptables \
--table nat \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_PRT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 192.168.122.0/24 \
-p tcp '!' \
--destination 192.168.122.0/24 \
--jump MASQUERADE \
--to-ports 1024-65535
iptables \
--table nat \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_PRT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 192.168.122.0/24 \
--destination 255.255.255.255/32 \
--jump RETURN
iptables \
--table nat \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_PRT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 192.168.122.0/24 \
--destination 224.0.0.0/24 \
--jump RETURN
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWO \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--source 2001:db8:ca2:2::/64 \
--in-interface virbr0 \
--jump ACCEPT
ip6tables \
--table filter \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_FWI \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--destination 2001:db8:ca2:2::/64 \
--out-interface virbr0 \
--jump ACCEPT
iptables \
--table mangle \
util: move virtual network firwall rules into private chains The previous commit created new chains to hold the firewall rules. This commit changes the code that creates rules to place them in the new private chains instead of the builtin top level chains. With two networks running, the rules in the filter table now look like -N LIBVIRT_FWI -N LIBVIRT_FWO -N LIBVIRT_FWX -N LIBVIRT_INP -N LIBVIRT_OUT -A INPUT -j LIBVIRT_INP -A FORWARD -j LIBVIRT_FWX -A FORWARD -j LIBVIRT_FWI -A FORWARD -j LIBVIRT_FWO -A OUTPUT -j LIBVIRT_OUT -A LIBVIRT_FWI -d 192.168.0.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWI -d 192.168.1.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A LIBVIRT_FWI -o virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.0.0/24 -i virbr0 -j ACCEPT -A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWO -s 192.168.1.0/24 -i virbr1 -j ACCEPT -A LIBVIRT_FWO -i virbr1 -j REJECT --reject-with icmp-port-unreachable -A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT -A LIBVIRT_FWX -i virbr1 -o virbr1 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p udp -m udp --dport 67 -j ACCEPT -A LIBVIRT_INP -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT -A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT -A LIBVIRT_OUT -o virbr1 -p udp -m udp --dport 68 -j ACCEPT While in the nat table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -s 192.168.0.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.0.0/24 ! -d 192.168.0.0/24 -j MASQUERADE -A LIBVIRT_PRT -s 192.168.1.0/24 -d 224.0.0.0/24 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 -d 255.255.255.255/32 -j RETURN -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A LIBVIRT_PRT -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE And finally the mangle table: -N LIBVIRT_PRT -A POSTROUTING -j LIBVIRT_PRT -A LIBVIRT_PRT -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A LIBVIRT_PRT -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-05 18:53:55 +03:00
--insert LIBVIRT_PRT \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 16:20:06 +03:00
--out-interface virbr0 \
--protocol udp \
--destination-port 68 \
--jump CHECKSUM \
--checksum-fill
Copy Permalink