shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2025-02-13 01:57:25 +03:00
Code Releases Activity
libvirt/tests/qemuxml2argvdata/cpu-cache-passthrough2.args

30 lines
794 B
Plaintext
Raw Normal View History

qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 13:29:01 +01:00
HOME=/tmp/lib/domain--1-foo \
qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 12:15:07 +01:00
XDG_DATA_HOME=/tmp/lib/domain--1-foo/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-foo/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-foo/.config \
qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-x86_64 \
-name foo \
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-machine pc,accel=kvm,usb=off,dump-guest-core=off \
qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
-cpu host,host-cache-info=on \
-m 214 \
qemu: Always assume QEMU_CAPS_REALTIME_MLOCK The '-realtime mlock' cmd line argument was introduced in QEMU commit v1.5.0-rc0~190 which matches minimal QEMU version we require. Therefore, the capability will always be present. Apparently, nearly none of our xml2argv test cases had the capability hence slightly bigger change under qemuxml2argvdata/. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 10:03:36 +02:00
-realtime mlock=off \
qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-no-user-config \
qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
-nodefaults \
qemu: use long on|off syntax for -chardev boolean option values The preferred syntax for boolean options is to set the value "on" or "off". QEMU 7.1.0 will deprecate the short format we currently use. The long format has been supported with -chardev since at least 1.5.3, so we don't need to check for it. Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-16 11:29:24 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-foo/monitor.sock,\
server=on,wait=off \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 00:04:58 +02:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 12:51:55 +02:00
-no-shutdown \
qemu: Add support for guest CPU cache This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-25 19:07:19 +02:00
-no-acpi \
-usb \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Copy Permalink