shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 21:34:54 +03:00
Code Releases Activity
cf521fc8ba
libvirt/tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml

53 lines
1.7 KiB
XML
Raw Normal View History

conf: alter disk mirror xml output Now that we track a disk mirror as a virStorageSource, we might as well update the XML to theoretically allow any type of mirroring destination (not just a local file). A later patch will also be reusing <mirror> to track the block commit of the top layer of a chain, which is another case where libvirt needs to update the backing chain after the job is finally pivoted, and since backing chains can have network backing files as the destination to commit into, it makes more sense to display that in the XML. This patch changes output-only XML; it was already documented that <mirror> does not affect a domain definition at this point (because qemu doesn't provide persistent bitmaps yet). Any application that was starting a block copy job with older libvirt and then relying on the domain XML to determine if it was complete will no longer be able to access the file= and format= attributes of mirror that were previously used. However, this is not going to be a problem in practice: the only time a block copy job works is on a transient domain, and any app that is managing a transient domain probably already does enough of its own bookkeeping to know which file it is mirroring into without having to re-read it from the libvirt XML. The one thing that was likely to be used in a mirroring job was the ready= attribute, which is unchanged. Meanwhile, I made sure the schema and parser still accept the old format, even if we no longer output it, so that upgrading from an older version of libvirt is seamless. * docs/schemas/domaincommon.rng (diskMirror): Alter definition. * src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two styles of mirror elements. (virDomainDiskDefFormat): Output new style. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New file, copied from... * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here before modernizing. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New files. * tests/qemuxml2xmltest.c (mymain): Test both styles. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-22 08:39:57 +04:00
<domain type='qemu' id='1'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
<memory unit='KiB'>219136</memory>
<currentMemory unit='KiB'>219136</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='i686' machine='pc'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu</emulator>
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<backingStore/>
blockcommit: track job type in xml A future patch is going to wire up qemu active block commit jobs; but as they have similar events and are canceled/pivoted in the same way as block copy jobs, it is easiest to track all bookkeeping for the commit job by reusing the <mirror> element. This patch adds domain XML to track which job was responsible for creating a mirroring situation, and adds a job='copy' attribute to all existing uses of <mirror>. Along the way, it also massages the qemu monitor backend to read the new field in order to generate the correct type of libvirt job (even though it requires a future patch to actually cause a qemu event that can be reported as an active commit). It also prepares to update persistent XML to match changes made to live XML when a copy completes. * docs/schemas/domaincommon.rng: Enhance schema. * docs/formatdomain.html.in: Document it. * src/conf/domain_conf.h (_virDomainDiskDef): Add a field. * src/conf/domain_conf.c (virDomainBlockJobType): String conversion. (virDomainDiskDefParseXML): Parse job type. (virDomainDiskDefFormat): Output job type. * src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish active from regular commit. * src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type. (qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type on completion. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml: Update tests. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise. * tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New file. * tests/qemuxml2xmltest.c (mymain): Drive new test. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-29 07:46:44 +04:00
<mirror type='file' file='/dev/HostVG/QEMUGuest1Copy' job='copy' ready='yes'>
conf: alter disk mirror xml output Now that we track a disk mirror as a virStorageSource, we might as well update the XML to theoretically allow any type of mirroring destination (not just a local file). A later patch will also be reusing <mirror> to track the block commit of the top layer of a chain, which is another case where libvirt needs to update the backing chain after the job is finally pivoted, and since backing chains can have network backing files as the destination to commit into, it makes more sense to display that in the XML. This patch changes output-only XML; it was already documented that <mirror> does not affect a domain definition at this point (because qemu doesn't provide persistent bitmaps yet). Any application that was starting a block copy job with older libvirt and then relying on the domain XML to determine if it was complete will no longer be able to access the file= and format= attributes of mirror that were previously used. However, this is not going to be a problem in practice: the only time a block copy job works is on a transient domain, and any app that is managing a transient domain probably already does enough of its own bookkeeping to know which file it is mirroring into without having to re-read it from the libvirt XML. The one thing that was likely to be used in a mirroring job was the ready= attribute, which is unchanged. Meanwhile, I made sure the schema and parser still accept the old format, even if we no longer output it, so that upgrading from an older version of libvirt is seamless. * docs/schemas/domaincommon.rng (diskMirror): Alter definition. * src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two styles of mirror elements. (virDomainDiskDefFormat): Output new style. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New file, copied from... * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here before modernizing. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New files. * tests/qemuxml2xmltest.c (mymain): Test both styles. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-22 08:39:57 +04:00
<source file='/dev/HostVG/QEMUGuest1Copy'/>
</mirror>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='block' device='cdrom'>
<source dev='/dev/HostVG/QEMUGuest2'/>
<backingStore/>
<target dev='hdc' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='1' target='0' unit='0'/>
</disk>
<disk type='file' device='disk'>
<source file='/tmp/data.img'/>
<backingStore/>
blockcommit: track job type in xml A future patch is going to wire up qemu active block commit jobs; but as they have similar events and are canceled/pivoted in the same way as block copy jobs, it is easiest to track all bookkeeping for the commit job by reusing the <mirror> element. This patch adds domain XML to track which job was responsible for creating a mirroring situation, and adds a job='copy' attribute to all existing uses of <mirror>. Along the way, it also massages the qemu monitor backend to read the new field in order to generate the correct type of libvirt job (even though it requires a future patch to actually cause a qemu event that can be reported as an active commit). It also prepares to update persistent XML to match changes made to live XML when a copy completes. * docs/schemas/domaincommon.rng: Enhance schema. * docs/formatdomain.html.in: Document it. * src/conf/domain_conf.h (_virDomainDiskDef): Add a field. * src/conf/domain_conf.c (virDomainBlockJobType): String conversion. (virDomainDiskDefParseXML): Parse job type. (virDomainDiskDefFormat): Output job type. * src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish active from regular commit. * src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type. (qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type on completion. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml: Update tests. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise. * tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New file. * tests/qemuxml2xmltest.c (mymain): Drive new test. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-29 07:46:44 +04:00
<mirror type='file' file='/tmp/copy.img' format='qcow2' job='copy'>
conf: alter disk mirror xml output Now that we track a disk mirror as a virStorageSource, we might as well update the XML to theoretically allow any type of mirroring destination (not just a local file). A later patch will also be reusing <mirror> to track the block commit of the top layer of a chain, which is another case where libvirt needs to update the backing chain after the job is finally pivoted, and since backing chains can have network backing files as the destination to commit into, it makes more sense to display that in the XML. This patch changes output-only XML; it was already documented that <mirror> does not affect a domain definition at this point (because qemu doesn't provide persistent bitmaps yet). Any application that was starting a block copy job with older libvirt and then relying on the domain XML to determine if it was complete will no longer be able to access the file= and format= attributes of mirror that were previously used. However, this is not going to be a problem in practice: the only time a block copy job works is on a transient domain, and any app that is managing a transient domain probably already does enough of its own bookkeeping to know which file it is mirroring into without having to re-read it from the libvirt XML. The one thing that was likely to be used in a mirroring job was the ready= attribute, which is unchanged. Meanwhile, I made sure the schema and parser still accept the old format, even if we no longer output it, so that upgrading from an older version of libvirt is seamless. * docs/schemas/domaincommon.rng (diskMirror): Alter definition. * src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two styles of mirror elements. (virDomainDiskDefFormat): Output new style. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New file, copied from... * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here before modernizing. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New files. * tests/qemuxml2xmltest.c (mymain): Test both styles. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-22 08:39:57 +04:00
<format type='qcow2'/>
<source file='/tmp/copy.img'/>
</mirror>
<target dev='vda' bus='virtio'/>
</disk>
<disk type='file' device='disk'>
<source file='/tmp/logs.img'/>
<backingStore/>
<target dev='vdb' bus='virtio'/>
</disk>
<controller type='usb' index='0'/>
<controller type='ide' index='0'/>
<controller type='pci' index='0' model='pci-root'/>
<memballoon model='virtio'/>
</devices>
</domain>
Copy Permalink