shaba/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 21:34:54 +03:00
Code Releases Activity
e9a85a6e4f
libvirt/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie-autoadd.xml

149 lines
6.3 KiB
XML
Raw Normal View History

qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<domain type='qemu'>
<name>q35-test</name>
<uuid>11dbdcdd-4c3b-482b-8903-9bdb8c0a2774</uuid>
<memory unit='KiB'>2097152</memory>
<currentMemory unit='KiB'>2097152</currentMemory>
<vcpu placement='static' cpuset='0-1'>2</vcpu>
<os>
<type arch='x86_64' machine='q35'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/libexec/qemu-kvm</emulator>
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='vdb' bus='virtio'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</disk>
<controller type='virtio-serial' index='0'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
<controller type='scsi' index='0' model='virtio-scsi'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
<controller type='usb' index='0' model='nec-xhci'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
<controller type='sata' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pcie-root'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='1' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<target chassis='1' port='0x10'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='2' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='2' port='0x11'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='3' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='3' port='0x12'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='4' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='4' port='0x13'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='5' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='5' port='0x14'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='6' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='6' port='0x15'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x5'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='7' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='7' port='0x16'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x6'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='8' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='8' port='0x17'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x7'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='9' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='9' port='0x18'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0' multifunction='on'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='10' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='10' port='0x19'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x1'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='11' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='11' port='0x1a'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x2'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='12' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='12' port='0x1b'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x3'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<controller type='pci' index='13' model='pcie-root-port'>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='13' port='0x1c'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x4'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</controller>
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 03:37:30 +03:00
<controller type='pci' index='14' model='pcie-root-port'>
<model name='ioh3420'/>
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 22:46:01 +03:00
<target chassis='14' port='0x1d'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x5'/>
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 03:37:30 +03:00
</controller>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
<filesystem type='mount' accessmode='passthrough'>
<source dir='/export/to/guest'/>
<target dir='/import/from/host'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</filesystem>
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</interface>
<interface type='user'>
<mac address='00:11:22:33:44:66'/>
<model type='e1000e'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</interface>
<input type='passthrough' bus='virtio'>
<source evdev='/dev/input/event1234'/>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</input>
<input type='mouse' bus='virtio'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x0b' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</input>
<input type='keyboard' bus='virtio'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x0c' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</input>
<input type='tablet' bus='virtio'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x0d' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<video>
<model type='virtio' heads='1' primary='yes'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
</video>
<memballoon model='virtio'>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</memballoon>
<rng model='virtio'>
<rate bytes='123' period='1234'/>
<backend model='random'>/dev/urandom</backend>
qemu: don't force-add a dmi-to-pci-bridge just on principle Now the a dmi-to-pci-bridge is automatically added just as it's needed (when a pci-bridge is being added), we no longer have any need to force-add one to every single Q35 domain.
2016-09-20 00:11:20 +03:00
<address type='pci' domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 21:38:47 +03:00
</rng>
</devices>
</domain>
Copy Permalink