IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The layout of my home directory is somewhat peculiar: I store
all git repositories in ~/src/upstream, but since I spend
almost all of my time hacking on libvirt, I also have a
convenience symlink ~/src/libvirt -> ~/src/upstream/libvirt
that I use to access that specific git repository.
The above setup has served me well for years; however, ever
since commit ca1471622d dropped our own custom definitions
for abs_{,top_}{src,build}dir and started using the ones
provided by autotools, virstoragetest has started reliably
failing with errors such as
2) Storage backing chain 2 ...
Offset 0
Expect [chain member: 0
path:/home/abologna/src/upstream/libvirt/tests/virstoragedata/raw
backingStoreRaw: <null>
capacity: 0
encryption: 0
relPath:<null>
type:1
format:1
protocol:none
hostname:<null>
]
Actual [chain member: 0
path:/home/abologna/src/libvirt/tests/virstoragedata/raw
backingStoreRaw: <null>
capacity: 0
encryption: 0
relPath:<null>
type:1
format:1
protocol:none
hostname:<null>
]
... FAILED
Using abolute paths instead of canonical ones in the tests makes
the problem go away.
Note that all tests that are specifically designed to test path
canonicalization via TEST_PATH_CANONICALIZE() were passing even
before this patch and are not touched by it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in fdf6c89ee7, this dependency looks weird. It was
needed because of the way that while() loop was written - it
fetches next argument in every iteration. Therefore, our only
option was for ARG_END to have the same value as QEMU_CAPS_LAST.
This also meant that QEMU_CAPS_* could have been only at the end
of the __VA_ARGS__.
This commit reworks the while() loop and removes the dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is one specific caller (testInfoSetArgs() in
qemuxml2argvtest.c) which expect the va_list argument to change
after returning from the virQEMUCapsSetVAList() function.
However, since we are passing plain va_list this is not
guaranteed. The man page of stdarg(3) says:
If ap is passed to a function that uses va_arg(ap,type), then
the value of ap is undefined after the return of that function.
(ap is a variable of type va_list)
I've seen this in action in fact: on i686 the qemuxml2argvtest
fails on the second test case because testInfoSetArgs() sees
ARG_QEMU_CAPS and calls virQEMUCapsSetVAList to process the
capabilities (in this case there's just one
QEMU_CAPS_SECCOMP_BLACKLIST). But since the changes are not
reflected in the caller, in the next iteration testInfoSetArgs()
sees the QEMU capability and not ARG_END.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The mock fopen() function will abort if "/proc/mounts" is
requested with "r" permissions and VIR_CGROUP_MOCK_FILENAME
env var is not set.
Unfortunately this is triggering by the libselinux library
constructor when it tries to read /proc/mounts to find out
if selinuxfs is mounted in an unusual place.
This, however, only affects libselinux in Debian as that
opens with "r", while in Fedora / RHEL it opens "re" and
thus luckily never triggered the abort(), instead getting
an EACCESS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If qemuFirmwareFetchConfigs() returned more or fewer paths than
expected all that we see is the following error message:
Expected 5 paths, got 7
While it is technically correct (the best kind of correct), we
can do better:
Unexpected path (i=0). Expected /some/path got /some/other/path
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The individual qemuDomainDetach*Device() functions will soon be "less
functional", since some of the code that is duplicated in 10 of the 12
detach functions is going to be moved into the common
qemuDomainDetachDeviceLive(), which calls them all.
qemuhotplugtest.c is the only place any of these individual functions
is called other than qemuDomainDetachDeviceLive() itself. Fortunately,
qemuDomainDetachDeviceLive() provides exactly the functionality needed
by the test driver (except that it supports detach of more device
types than the test driver has tests for).
This patch replaces the calls to
qemuDomainDetach(Chr|Shmen|Watchdog|Disk)Device with a single call to
the higher level function, allowing us to shift functionality between
the lower level functions without breaking the tests.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As the previous commit mentioned, argv mode (such as when you feed
virsh via stdin with <<\EOF instead of via a single shell argument)
didn't permit comments. Do this by treating any command name token
that starts with # as a comment which silently eats all remaining
arguments to the next newline or semicolon.
Note that batch mode recognizes unquoted # at the start of any word as
a command as part of the tokenizer, while this patch only treats # at
the start of the command word as a comment (any other # remaining by
the time vshCommandParse() is processing things was already quoted
during the tokenzier, and as such was probably intended as the actual
argument to the command word earlier in the line).
Now I can do something like:
$ virsh -c test:///default <<EOF
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
EOF
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Continuing from what I did in commit 4817dec0, now I want to write a
sequence that is self-documenting. So I need comments :)
Now I can do something like:
$ virsh -c test:///default '
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
'
Note that this does NOT accept comments in argv mode, another patch
will tackle that.
(If I'm not careful, I might turn virsh into a full-fledged 'sh'
replacement? Here's hoping I don't go that far...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Base macro to unify the actual testCompareXMLToArgv test calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* ARG_CAPS_ARCH must be specified with ARG_CAPS_VER
* ARG_QEMU_CAPS shouldn't be specified with ARG_CAPS_*
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move DO_CAPS_TEST* qemuCaps init and all the associated setup
into testInfoSetArgs, adding ARG_CAPS_ARCH and ARG_CAPS_VER
options and using those to build the capsfile path locally
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have tests for simple guests with graphics for basically
all other architectures, so it makes sense to include s390x
too.
The input file was generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks, using a version of virt-manager
that includes commit 7b9de27a990f.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As of commit db6c7070e25a, virt-manager will default to using
virtio-blk rather than virtio-scsi for aarch64/virt guests,
bringing them in line with other architectures. Update our test
case to reflect this change.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Commit 3bd4ed46 introduced this element as required which
breaks backcompat for test driver. Let's make the element optional.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move DO_TEST* qemuCaps init into testInfoSetArgs. This is a step
towards unifying the different test macro implementations
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is closer to the pattern of qemuxml2xml tests, and will make
things easier if we extend testInfo to contain more freeable data
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rather than make callers do it. The operative info is just arch
and ver which we are passing in already.
Fold in stripmachinealiases too since it is just dependent on
ver value
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
They are potentially useful at the moment, but we will be making
things much more flexible
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop parseFlags from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop migrateFrom and migrateFd from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This allows us to drop stub GIC values from DO_TEST_FULL calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is necessary before we can start adding more optional parameter
implementations to DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This establishes a pattern that will allow us to make test macros
more general purpose, by taking optional arguments. The general
format will be:
DO_TEST_FULL(...
ARG_FOO, <value1>,
ARG_BAR, <value2>)
ARG_X are just enum values that we look for in the va_args and know
how to interpret.
Implement this for the existing implicit qemuCaps va_args
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For now it just fills in the qemuCaps list. We will expand it
in future patches
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:
<pool>
...
<refresh>
<volume allocation='capacity'/>
</refresh>
...
</pool>
This is useful for certain backends where computing the actual allocation
of a volume might be an expensive operation.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Change domcaps to skip formatting XML if the default
TRISTATE_BOOL_ABSENT is found. Now when domcaps is extended, driver
XML output won't change until an explicit TRISTATE_BOOL value is set
in driver code.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'full' test verifies the output of a virDomainCapsPtr built
by hand. It has the following problems:
The domcaps test suite nowadays has 3 hypervisor driver implementations
which should give us plenty of opportunity to get full domcaps coverage.
I don't think this test has much value. And it has the following issues:
- Requires manual intervention to test new domcaps XML, which is easy
to miss, for example gic bits aren't covered there.
- The SET_ALL_BITS trick it uses to fill in enums will output
values that are never reported by any driver implementation
(strings like 'default')
Let's remove it
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'empty' demonstrates XML generated when only bare minimum caps
data has been filled in. This will demonstrate changes that alter
the default XML output.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We already document how to generate them, so might as well
go the extra mile and document the remaining steps.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This info can be useful to filter devices visible
to mgmt clients so that they won't see devices that
unsafe/not meaningful to pass thru.
Provide class info the way it is provided by udev or
kernel that is as single 6-digit hexadecimal.
Class element is not optional. I guess this should not
break users that use virNodeDeviceCreateXML because
they probably specify only scsi_host capability on
input and then node device driver gets other capabilities
from udev after device appeared.
HAL driver does not get support for the new element in
this patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.
Let's just use "klass" as field name instead of _class or class
and add syntax rule.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This code snippet has clearly been cargo-culted, and all its
instances can be safely dropped seeing as 1) a much better
way to handle the scenario in C programs would be to pass the
value via the preprocessor, and 2) the value is actually not
used anywhere after being defined.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
TEST_DRIVER_DIR is defined as "$(top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search (the
absolute version of) that directory automatically, which means
passing it through the environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's no longer used as of commit a9694a8e18.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add support in the domXML<->native config converter for
max_grant_frames. Include a test for the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting max_grant_frames in libxl domain config
object and include a test to check that it is properly converted
from XML to libxl domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All Xen domains have a xenbus device. Implicitly add one if not
already explicitly specified in the domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is mostly to avoid a memleak that is not a true memleak
anyway - prefixes will be freed by kernel upon test exit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In theory, it's nice to have virFileWrapperAddPrefix() return a
value that indicates if the function succeeded or not. But in
practice, nobody checks for that and in fact blindly believes
that the function succeeded. Therefore, make the function return
nothing and just abort() if it would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With only a couple minor tweaks, we can make the existing
doCapsTest() functions with testQemuCapsIterate() and finally
remove the need to manually adjust the test programs every time
a new input file is introduced; moreover, this means that the
two lists can't possibly get out of sync anymore.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This function iterates over a directory containing
capabilities-related data, extract some useful bits of
information from the file name, and calls a user-provided
callback.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We're not using any of the functionality offered by the
module at the moment, but we will in just a second.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This removes the awkard escaping and will allow us to perform
some more refactoring later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We're using static string concatenation at the moment, but
that will no longer be a possibility in a bit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This removes a little duplication right away, and will allow
us to avoid introducing more later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This is not particularly useful right now, but will allow us
to refactor some functionality later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
These functions don't do anything too interesting right now,
but will be extended later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1564270
Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.
At the same time, introduce bunch of tests to test the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test firmware description parsing so far.
The test files come from three locations:
1) ovmf-sb-keys.json and ovmf-sb.json come from OVMF
package from RHEL-7 (with slight name change to reflect their
features in filename too),
2) bios.json and aavmf.json come from example JSON documents from
firmware.json from qemu's git (3a0adfc9bf),
3) ovmf.json is then copied from ovmf-sb.json and stripped
of SECURE_BOOT and REQUIRES_SMM flags, OVMF path change,
description update and machine type expanded for both pc and q35
machine types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This is going to extend virDomainLoader enum. The reason is that
once loader path is NULL its type makes no sense. However, since
value of zero corresponds to VIR_DOMAIN_LOADER_TYPE_ROM the
following XML would be produced:
<os>
<loader type='rom'/>
...
</os>
To solve this, introduce VIR_DOMAIN_LOADER_TYPE_NONE which would
correspond to value of zero and then use post parse callback to
set the default loader type to 'rom' if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In qemuxml2xmltest, both activeVcpus and blockjobs members
of the testInfo struct have been entirely unused ever since
commit d1a7fc8bb3.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
So far we are providing the suppressions file with a relative
path to valgrind. This apparently doesn't work on some distros
like Ubuntu and its derivates. Providing the absolute path fixes
the problem.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The existing behavior for ppc64 guests is to always add a USB
keyboard and mouse combo if graphics are present; unfortunately,
this means any attempt to use a USB tablet will cause both pointing
devices to show up in the guest, which in turn will result in poor
user experience.
We can't just stop adding the USB mouse or start adding a USB tablet
instead, because existing applications and users might rely on the
current behavior; however, we can avoid adding the USB mouse if a USB
tablet is already present, thus allowing users and applications to
create guests that contain a single pointing device.
https://bugzilla.redhat.com/show_bug.cgi?id=1683681
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These are similar to the existing simple headless guests, but
also include a graphical output and some input devices.
Input files were generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While the parser and schema have to accept all possible models,
virtio-(non-)transitional models are only applicable to
type=passthrough and should be otherwise rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we pass XML to virDomainDefineXML API with these two elements:
...
<title></title>
<description></description>
...
libvirt correctly ignores these two elements and they will not appear
in the parsed XML.
However, if we use virDomainSetMetadata API and with "" as value for
title or description we will end up with the parsed XML that contains
these empty elements.
Let's fix the behavior of this API to behave the same as
virDomainDefineXML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1518042
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element. It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing. Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags. We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
While this function is not, strictly speaking, a predicate,
it still mostly behaves like one as evidenced by the vast
majority of its callers, so using bool rather than int as
the return type makes sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It may happen that both symbols are present. Especially when
chaining mocks. For instance if a test is using virpcimock and
then both stat and __xstat would be present in the address space
as virpcimock implements both. Then, if the test would try to use
say virfilewrapper (which again uses VIR_MOCK_REAL_INIT_ALT() to
init real_stat and real___xstat) it would find stat() from
virpcimock and stop there. The virfilewrapper.c:real___xstat
wouldn't be initialized and thus it may result in a segfault.
The reason for segfault is that sys/stat.h may redefine stat() to
call __xstat().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Capabilities should not duplicate data that are obvious from our
documentation and will not change with different QEMU binaries
or the way how we compile libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When dealing with internal paths we don't need to worry about
whether or not suffixes are lowercase since we have full control
over them, which means we can avoid performing case-insensitive
string comparisons.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Add a new test for the storage pool capabilities. There will be
one test mocked with every backend available (full) and one where
only the file system pool is available.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Define a schema for the storage pool capabilities along with
a test to show the general format.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The sheepdog pool is documented as not using the volume type,
so let's just remove it. Besides it would have produced bad
results since the defaultType is FILE but the formatting used
the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If none of the 'capabilities' features are enabled we'd still format the
opening and closing tag for the <capabilities element.
The implementation is suboptimal but will be refactored for a better
approach. This is done prior to the refactor to show that tests are not
impacted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as
Skylake-Client.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>