1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 21:34:54 +03:00
Commit Graph

569 Commits

Author SHA1 Message Date
Daniel Veillard
8fd68675e2 Release of libvirt-1.3.1
* docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: regenerated
2016-01-17 10:29:57 +08:00
Cole Robinson
da176bf6b7 examples: Use one top level makefile
Using one Makefile per example subdirectory essentially serializes 'make'
calls. Convert to one example/Makefile that builds and distributes
all the subdir files. This reduces example/ rebuild time from about 5.8
seconds to 1.5 seconds on my machine.

One slight difference is that we no longer ship Makefile.am with the
examples in the rpm. This was virtually useless anyways since the Makefile
was very specific to libvirt infrastructure, so wasn't generically
reusable anyways.

Tested with 'make distcheck' and 'make rpm'
2016-01-09 21:14:12 -05:00
Michael Chapman
3e86757358 spec: chkconfig(8) and service(8) are in /sbin/, not /bin/
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-01-05 17:28:05 -05:00
Michael Chapman
c0617421ab spec: dbus-devel is needed as build dependency if polkit support is enabled
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-01-05 15:48:06 -05:00
Daniel Veillard
11288f56ee Release of libvirt-1.3.0
* docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: regenerated
2015-12-09 17:13:48 +08:00
Daniel P. Berrange
da054f35ab rpm: explicitly enable & start virtlogd on install
When installing the libvirt-daemon RPM, we have a %post rule to
enable the libvirtd.service, virtlockd.socket and virtlogd.socket
files. This is only done, however, when the RPM is first installed,
not when upgrading RPMs. So virtlogd will not get activated on
upgrading, which is a problem as libvirt qemu driver will expect
it to be available by default.

This adds a trigger that is run when uninstalling libvirt-daemon
older than 1.3.0 that will enable & start virtlogd.socket if
libvirtd is enabled and/or started. Using the trigger rather
than %post ensures that it only runs once, allowing admins to
disable it explicitly thereafter without future upgrades
re-enabling it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-08 11:08:16 +00:00
Martin Kletzander
2340f3ebfb admin: Distribute libvirt-admin.conf
Commit 48cd3dfa66 introduced configuration
file for libvirt-admin but forgot to distribute it.  Also the change
made to libvirt.conf in commit dbecb87f94
should've been removed thanks to introduction of separate config file.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-12-01 11:44:48 +01:00
Martin Kletzander
15b0a6d641 spec: Temporarily disable new admin-related files
The virt-admin binary and its man page should not yet be distributed,
but we need libvirt-common.h.  RPM build fails without specifying these.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-12-01 11:42:44 +01:00
Daniel P. Berrange
323a329b26 Import stripped down virtlockd code as basis of virtlogd
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-26 14:28:55 +00:00
Daniel Veillard
b091fef5cf Release of libvirt-1.2.21
* docs/news.html.in libvirt.spec.in: Updated for the release
* po/*.po*: regenerated
2015-11-04 10:59:12 +08:00
Michal Privoznik
7c8250d765 wireshark: Install to generic plugin directory
There has been a report on the list [1] that we are not
installing the wireshark dissector into the correct plugin
directory. And in fact we are not. The problem is, the plugin
directory path is constructed at compile time. However, it's
dependent on the wireshark version, e.g.

  /usr/lib/wireshark/plugins/1.12.6

This is rather unfortunate, because if libvirt RPMs were built
with one version, but installed on a system with newer one, the
plugins are not really loaded. This problem lead fedora packagers
to unify plugin path to:

  /usr/lib/wireshark/plugins/

Cool! But this was enabled just in wireshark-1.12.6-4. Therefore,
we must require at least that version.

And while at it, on some distributions, the wireshark.pc file
already has a variable that defines where plugin dir is. Use that
if possible.

1: https://www.redhat.com/archives/libvirt-users/2015-October/msg00063.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-10-29 13:55:06 +01:00
Cole Robinson
62ff210e5d spec: Delete .git after applying patches
I'm hitting this little annoyance in fedora's package repo:

$ fedpkg prep
Downloading libvirt-1.2.20.tar.gz
...
+ /usr/bin/gzip -dc /home/crobinso/src/fedora/libvirt/libvirt-1.2.20.tar.gz
$ git clean -xdf
Removing libvirt-1.2.20.tar.gz
Skipping repository libvirt-1.2.20/

We git-ify the libvirt directory as part of applying patches in the spec
file, but 'git clean' will ignore subfolders that appear to be standalone
git repos.

Let's just delete the .git directory after we're done with it.
2015-10-06 15:54:47 -04:00
Daniel P. Berrange
e3155cac18 libvirt.spec: fix accidental conditional inclusion of polkit docs
In previous change:

  commit 29b5167417
  Author: Jiri Denemark <jdenemar@redhat.com>
  Date:   Tue Aug 4 14:05:52 2015 +0200

    examples: Add example polkit ACL rules

The polkit examples were accidentally added to the spec inside
a %if %{with_network} conditional.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-02 16:08:02 +01:00
Daniel Veillard
439760214c Release of libvirt-1.2.20
* docs/news.html.in libvirt.spec.in: update for new release
* po/*.po*: regenerate localization
2015-10-02 13:17:16 +02:00
Cole Robinson
dae1250b24 spec: Fix some warnings with latest rpmbuild
$ rpmbuild -ba libvirt.spec
warning: Macro expanded in comment on line 5: # If neither fedora nor rhel was defined, try to guess them from %{dist}

warning: Macro %enable_autotools defined but not used within scope
warning: Macro %client_only defined but not used within scope
...
2015-09-22 15:57:23 -04:00
Martin Kletzander
f05f005c8b qemu: Allow others to browse /var/lib/libvirt/qemu
Commit f1f68ca334 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.

The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.

Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-09-14 10:06:00 +02:00
Martin Kletzander
732ce2789b examples: Add missing build data for 'rename'
Commit e755186c5c added the rename example, but forgot to build some
essential files in there as well as add it to the spec file.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-09-07 09:00:19 +02:00
Jiri Denemark
29b5167417 examples: Add example polkit ACL rules
Creating ACL rules is not exactly easy and existing examples are pretty
simple. This patch adds a somewhat complex example which defines several
roles. Admins can do everything, operators can do basic operations
on any domain and several groups of users who act as operators but only
on a limited set of domains.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-09-04 17:26:04 +02:00
Daniel Veillard
66c5f02b96 Release of libvirt-1.2.19
* docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: regenerated
2015-09-02 10:19:20 +08:00
Daniel Veillard
bd311d3a8a Fix a trailing space in spec file 2015-08-03 17:43:34 +08:00
Daniel Veillard
bcfdd8e836 Release of libvirt-1.2.18
* docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: regenerated
2015-08-03 17:36:39 +08:00
Cole Robinson
6600f4f3d8 spec: Fix polkit dep on F23
As of fedora polkit-0.113-2, polkit-devel only pulls in polkit-libs, not
full polkit, but we need the latter for pkcheck otherwise our configure
test fails.
2015-07-21 14:06:37 -04:00
Daniel Veillard
845184b2fd Release of libvirt-1.2.17
* docs/news.html.in libvirt.spec.in: updated for the release
* po/*po*: regenerated
2015-07-02 13:22:30 +08:00
Martin Kletzander
1bcc88bbdd Temporarily disable admin API
Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.

Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-28 11:34:25 +08:00
Martin Kletzander
886eb3c787 spec: Remove admin package specification
Its only file must be included in the daemon package anyway, since the
daemon is linked with the admin library and so then it's just an empty
package until we have virt-admin binary which we can decide later on
whether to just move it to clients or create a new package for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-28 11:34:19 +08:00
Michal Privoznik
6fc122c6b9 libvirt.spec: Don't expect virt-admin in libvirt-admin yet
While Martin introduced the binary (and its manpage) in commit
4e7ccf8713 it was pushed by mistake. Therefore it was reverted in
220393bfb0. The problem is, the original commit was not quite right
as the binary was added into the spec file in a different commit:
55e0c840af. So as long as the binary does not exist, we must remove it
from the spec file too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-17 14:22:23 +02:00
Maxim Nestratov
9156991668 parallels: substitute parallels with vz spec file and Makefile
Since we have changed the name of the driver to vz, let's
reference it as vz everywhere.

Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
2015-06-17 15:07:55 +03:00
Martin Kletzander
878bf2a3c9 Add XML files with admin API specification
No online docs are build from it since it doesn't really fit into our
document structure and new page will need to be created for it, but this
is at least a heads-up commit for easier parsing in order to build some
documentation (or python bindings) later on.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:20 +02:00
Martin Kletzander
55e0c840af Add libvirt-admin library
Initial scratch of the admin library.  It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.

There's pkg-config file added and spec-file adjusted as well.

Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it.  Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:20 +02:00
Jim Fehlig
df37c26e73 spec: fixes for recently introduced libxl conf files
Commit 198cc1d3 introduced libxl-lockd and libxl-sanlock config
files but forgot to add them to the spec file.  Follow-up commit
62b18d98 added the files to daemon-driver-libxl, but missed adding
them to the daemon package when configuring libvirt
--without-driver-modules.  In addition, commit 62b18d98 added
libxl-sanlock to daemon-driver-libxl, but it should be included
in lock-sanlock when libvirt is configured --with-sanlock.
2015-06-01 12:01:18 -06:00
Daniel Veillard
77fd04aaae Release of libvirt-1.2.16
- docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: regenerate
2015-06-01 10:30:29 +08:00
Jim Fehlig
77664cb406 libxl: add logrotate config file
Add logrotate config for log files in /var/log/libvirt/libxl.
2015-05-05 09:08:11 -06:00
Cole Robinson
e94979e901 polkit: Allow password-less access for 'libvirt' group
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.

Let's finally add official support for this.

Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install

https://bugzilla.redhat.com/show_bug.cgi?id=957300
2015-05-04 12:57:06 -04:00
Daniel Veillard
b978b85b24 Release of libvirt-1.2.15
- docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: regenerated
2015-05-04 11:43:04 +08:00
Pavel Hrdina
62b18d981c rpm-build: update %files section for libxl
Recent commit 198cc1d3 introduced integration of lockd and sanlock into
libxl, but forget to update libvirt.spec.in to also list new files
distributed via package.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-04-30 17:21:07 +02:00
Cole Robinson
19425d110b qemu: Build nvram directory at driver startup
Similar to what was done for the channel socket in the previous commit.
2015-04-24 10:30:42 -04:00
Cole Robinson
e31ab02fd0 qemu: Build channel autosocket directory at driver startup
Rather than depend on the RPM to put it in place, since this doesn't
cover the qemu:///session case. Currently auto allocated socket path is
completely busted with qemu:///session

https://bugzilla.redhat.com/show_bug.cgi?id=1105274

And because we chown the directory at driver startup now, this also fixes
autosocket startup failures when using user/group=root

https://bugzilla.redhat.com/show_bug.cgi?id=1044561
https://bugzilla.redhat.com/show_bug.cgi?id=1146886
2015-04-24 10:30:42 -04:00
Cole Robinson
f93e121129 spec: Point fedora --with-loader-nvram at nightly firmware repo
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos

Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
2015-04-22 18:29:39 -04:00
Cole Robinson
fa19aca168 spec: Fix libxl build with driver modules 2015-04-22 15:44:19 -04:00
Jim Fehlig
d0baac09e6 libxl: Introduce configuration file for libxl driver
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-04-21 14:23:40 -06:00
Jiri Denemark
0c68ec7d78 daemon: Prefix sysctl configuration filename with a number
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.

https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-04-16 14:39:38 +02:00
Daniel Veillard
ecb9a5319a Release of libvirt-1.2.14
- docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: regenerated localization
2015-04-02 15:48:08 +08:00
Peter Krempa
6cfc8834c8 spec: Enable RBD storage driver in RHEL-7
Use correct package names too as they differ.
2015-03-05 16:24:53 +01:00
Daniel Veillard
1723cad6e7 Release of libvirt-1.2.13 2015-03-02 11:40:05 +08:00
Pavel Hrdina
259dfe24a8 libvirt.spec: remove vbox storage and network .so files
Commit 55ea7be7 removed separated modules for vbox_network and
vbox_storage drivers but forget to update libvirt.spec.in file. This
patch will fix rpm build.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-01-28 19:05:25 +01:00
Daniel Veillard
fd596a4583 Release of libvirt-1.2.12
* docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: regenerated the po
2015-01-27 16:01:12 +08:00
Jiri Denemark
97c6271150 spec: Fix syntax
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-12-16 09:21:40 +01:00
Daniel P. Berrange
34f03984a6 spec: Disable -Werror in Fedora RPM builds
Since we switched to using GIT to apply patches in the RPM spec,
we automagically also turned on -Werror, since the .git directory
now exists. We don't want this on in Fedora, since changing
header files often lead to new warnings being issued. Explicitly
turn off -Werror for non-RHEL platforms, instead of relying on
the defaults
2014-12-15 18:08:45 +00:00
Daniel Veillard
d171cac6a5 Release of libvirt-1.2.11
- docs/news.html.in libvirt.spec.in: update for release
- po/*.po*: updated localization and regenerated
2014-12-13 10:43:56 +08:00
Martin Kletzander
e9e5eee5a8 build: Move check for XML::XPath into bootstrap
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-12-09 08:23:21 +01:00