IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The second CHECK macro was used for string parameters. Let's rename it
to CHECK_STR and move it up to have all checks in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The first CHECK macro in the test is used for checking integer values.
Let's make it a bit more generic to be usable for any numeric type and
use it for a new CHECK_INT macro.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Prior to qemu 2.5 the node names would not be generated, thus would be
missing from 'query-blockstats' and 'query-named-block-nodes'. Test that
the code correctly detects nothing.
Additionally make sure that a VM without disks does not cause problems.
The test case change is necessary as our test file checker does not play
well with empty files.
qemu 2.9 returns an extra layer in the backing data if a block job is
active. Add a test case to see whether our code properly detects and
ignores such layer.
The test data was prepared by creating a backing chain of qcow2 images
(with qemu-img and with libvirt's snapshot feature).
One of the layers was then merged back by doing a block-commit:
virsh blockcommit VM hda --top /var/lib/libvirt/images/b
and then a block-copy job was started and kept in synchronized phase:
virsh blockcopy VM hda /tmp/tgt.img --transient job
Reviewed-by: Eric Blake <eblake@redhat.com>
Add the blockstats data and fix the expected output.
Test data was created as:
qemu-img create -f qcow2 img0 10M
qemu-img create -f qcow2 -o "backing_fmt=qcow2,backing_file=img0" img1
qemu-img create -f qcow2 -o "backing_fmt=qcow2,backing_file=img1" img2
...
Reviewed-by: Eric Blake <eblake@redhat.com>
With the new approach we are actually able to correctly detect node
names for the two instances of the same backing file.
Test images were created as:
qemu-img create -f qcow2 /var/lib/libvirt/images/base.qcow2 10M
qemu-img create -f qcow2 \
-o "backing_fmt=qcow2,backing_file=/var/lib/libvirt/images/base.qcow2 \
/var/lib/libvirt/images/a.qcow2
qemu-img create -f qcow2 \
-o "backing_fmt=qcow2,backing_file=/var/lib/libvirt/images/base.qcow2 \
/var/lib/libvirt/images/b.qcow2
and then used for two separate disks.
Reviewed-by: Eric Blake <eblake@redhat.com>
We can now iterate the hash table and print all detected backing chains.
This simplifies calling of the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove the complex and unreliable code which inferred the node name
hierarchy only from data returned by 'query-named-block-nodes'. It turns
out that query-blockstats contain the full hierarchy of nodes as
perceived by qemu so the inference code is not necessary.
In query blockstats, the 'parent' object corresponds to the storage
behind a storage volume and 'backing' corresponds to the lower level of
backing chain. Since all have node names this data can be really easily
used to detect node names.
In addition to the code refactoring the one remaining test case needed
to be fixed along.
Reviewed-by: Eric Blake <eblake@redhat.com>
Extract the test prefix path into a variable and reuse
virTestLoadFileJSON to load the sample json files rather than doing it
manually.
Reviewed-by: Eric Blake <eblake@redhat.com>
The node name and backing file name can be inferred from the hierarchy.
This will also help when converting to detect node names using
query-blockstats data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename 'json' and related variables to 'nodeNameJson'. Also rename the
test files along. This is a preparation for modifying how we detect node
names which will also require data from 'query-blockstats'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Test cases named '1' and '2' differed only in the length of the backing
chain, so remove test case '2' and rename test '1' to 'basic'.
Reviewed-by: Eric Blake <eblake@redhat.com>
On domain startup, bind host or bind service can be omitted
and we will format a working command line.
Extend this to hotplug as well and specify the service to QEMU
even if the host is missing.
https://bugzilla.redhat.com/show_bug.cgi?id=1452441
vcpu properties gathered from query-hotpluggable cpus need to be passed
back to qemu. As qemu did not use the node-id property until now and
libvirt forgot to pass it back properly (it was parsed but not passed
around) we did not honor this.
This patch adds node-id to the structures where it was missing and
passes it around as necessary.
The test data was generated with a VM with following config:
<numa>
<cell id='0' cpus='0,2,4,6' memory='512000' unit='KiB'/>
<cell id='1' cpus='1,3,5,7' memory='512000' unit='KiB'/>
</numa>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452053
oVirt uses relative names with directories in them. Test such
configuration. Also tests a snapshot done with _REUSE_EXTERNAL and a
relative backing file pre-specified in the qcow2 metadata.
Since we have to match the images by filename a common backing image
will break the detection process. Add a test case to see that the code
correctly did not continue the detection process.
Add the fields to support setting tls-creds and tls-hostname during
a migration (either source or target). Modify the query migration
function to check for the presence and set the field for future
consumers to determine which of 3 conditions is being met (NULL,
present and set to "", or present and sent to something). These
correspond to qemu commit id '4af245dc3' which added support to
default the value to "" and allow setting (or resetting) to ""
in order to disable. This reset option allows libvirt to properly
use the tls-creds and tls-hostname parameters.
Modify code paths that either allocate or use stack space in order
to call qemuMigrationParamsClear or qemuMigrationParamsFree for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
qemuMonitorGetGuestCPU can now optionally create CPU data from
filtered-features in addition to feature-words.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In cases where CPU hotplug is supported by qemu force the monitor to
reject invalid or broken responses to 'query-cpus'. It's expected that
the command returns usable data in such case.
QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.
We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:
<domainCapabilities>
...
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'>
<model fallback='allow'>Skylake-Client</model>
...
</mode>
<mode name='custom' supported='yes'>
<model usable='yes'>qemu64</model>
<model usable='yes'>qemu32</model>
<model usable='no'>phenom</model>
<model usable='yes'>pentium3</model>
<model usable='yes'>pentium2</model>
<model usable='yes'>pentium</model>
<model usable='yes'>n270</model>
<model usable='yes'>kvm64</model>
<model usable='yes'>kvm32</model>
<model usable='yes'>coreduo</model>
<model usable='yes'>core2duo</model>
<model usable='no'>athlon</model>
<model usable='yes'>Westmere</model>
<model usable='yes'>Skylake-Client</model>
...
</mode>
</cpu>
...
</domainCapabilities>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 3f71c79768 added 'qemu_id' field to track the id of the cpu
as reported by query-cpus. The patch did not include changes necessary
to propagate the id through the functions matching the data to the
libvirt cpu structures and thus all vcpus had id 0.
The field is named 'enable_id' in other structures and a patch recently
added 'qemu_id' which has different semantics. To avoid confusion in the
tests rename the field.
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Since introduction of chardev hotplug the code was wrong for the UDP
case and basically created a TCP socket instead. Use proper objects and
type for UDP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1377602
Until now the test was rather useless since it didn't check the
arguments formatted and didn't use properly configured chardev objects.
Add the expected arguments and instrument the test to validate them.
Modify some test cases to actually add valid data.
Note that the UDP test data is currently wrong due to a bug.
The chardev attach test would do all the tests in one virTestRun
instance. If one sub-test failed then the test would report failure
improperly and the error would be hard to debug since the error pointer
was overwritten.