IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When running libvirtd from a build directory on a system with unmodified
libtool, libvirtd's binary is not renamed as "lt-libvirtd". Check for
"/daemon/.libs/libvirtd" in addition to "lt-libvirtd".
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.
This reverts commit ec5b7bd2ec and most of
aae5cfb699.
This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
Remove the use of a manually run virLogStartup and
virNodeSuspendInitialize methods. Instead make sure they
are automatically run using VIR_ONCE_GLOBAL_INIT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daemon uses the following pattern when dispatching APIs with typed
parameters:
VIR_ALLOC_N(params, nparams);
virDomain*(dom, params, &nparams, flags);
virTypedParameterArrayClear(params, nparams);
In case nparams was originally set to 0, virDomain* API would fill it
with the number of typed parameters it can provide and we would use this
number (rather than zero) to clear params. Because VIR_ALLOC* returns
non-NULL pointer even if size is 0, the code would end up walking
through random memory. If we were lucky enough and the memory contained
7 (VIR_TYPED_PARAM_STRING) at the right place, we would try to free a
random pointer and crash.
Let's make sure params stays NULL when nparams is 0.
Update the gendispatch.pl script to get a little closer to
being able to generate code for the LXC monitor, by passing
in the struct prefix separately from the procedure prefix.
Also allow method names using virCapitalLetters instead
of vir_underscore_separator
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The copyright dates in the manpages haven't been updated in awhile.
Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.
Believe it or not, there's even a BZ for this:
https://bugzilla.redhat.com/show_bug.cgi?id=819364
WITH_INTERFACE is not defined, it should be WITH_NETCF there to load
the interface driver.
Eric posted patch weeks ago to resolve the problems in the whole
build system, but it's not finalised yet:
https://www.redhat.com/archives/libvir-list/2012-June/msg01299.html
I'm going to simply fix the wrong macro name here so that the
interface driver could loaded, and continue the work on the listing
API for interface driver.
When using libnl, use the variables pkg-config provides in case there are
additional libraries or CFLAGS required to build it. Specifically if
the libnl headers are not directly in /usr/include.
When running directly from GIT, libvirtd attempts to locate
the directory containing loadable modules. This currently
only works if executing libvirtd with a CWD inside the libvirt
source tree. Switch to locate based on the path to the current
binary instead
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Update the libvirtd dispatch code to use virReportError
instead of the virNetError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the libvirtd config handling code to use virReportError
instead of the virConfError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Domains configured with autostart may fail to start if the host
network stack has not been started. E.g. when using bridged
networking autostarting a domain can fail with
libvirtd[1403]: 2012-06-20 13:23:49.833+0000: 1485: error :
qemuAutostartDomain:177 : Failed to autostart VM 'test': Cannot get
interface MTU on 'br0': No such device
The callback that is invoked when a new RPC client is
initialized does not have any opaque parameter. Add
one so that custom data can be passed into the callback
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The generator doesn't handle lists of virDomainSnapshotPtr, so
this commit requires a bit more work than some RPC additions.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_LIST_ALL_SNAPSHOTS)
(REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_ALL_CHILDREN): New RPC calls,
with corresponding structs.
* daemon/remote.c (remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren): New functions.
* src/remote/remote_driver.c (remoteDomainListAllSnapshots)
(remoteDomainSnapshotListAllChildren): Likewise.
* src/remote_protocol-structs: Regenerate.
This patch wires up the RPC protocol handlers for
virConnectListAllDomains(). The RPC generator has no support for the way
how virConnectListAllDomains() returns the results so the handler code
had to be done manually.
The new api is handled by REMOTE_PROC_CONNECT_LIST_ALL_DOMAINS, with
number 273 and marked with high priority.
Previous commit
commit 32a9aac2e0
Author: William Jon McCann <william.jon.mccann@gmail.com>
Date: Thu May 3 12:36:27 2012 -0400
Use XDG Base Directories instead of storing in home directory
Accidentally changed the umask when creating /var/run/libvirt
to 077. This prevents /var/run/libvirt being readable by non-root,
which is required for non-root to connect to libvirtd. Fix the
code so that umask 077 is only used for the non-privileged libvirtd
instance.
Only the non-privileged libvirtd instance uses $HOME. So avoid
running the code for migrating to XDG directories unless using
a non-privileged libvirtd
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined. Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.
Based on analysis by Osier Yang.
* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
Some of our rules used $(PERL), while others used 'perl'. Always
using the variable allows a developer to point to a different (often
better) perl than the default one found on $PATH.
* daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL).
* src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h)
(PDWTAGS, %protocol.c, %_probes.stp): Likewise.
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.
Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.
* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
There was no rule forcing libvirt_qemu_probes.o to be built
before libvirt_qemu_probes.lo was used. Also libvirtd was
still referencing the .o file, rather than the .lo file.
Both the .lo and .o file must be listed as DEPENDENCIES,
otherwise libtool will unhelpfully delete the .o file
once the .lo file is created.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.
To address this, the augeas test cases need to be auto-generated
from the example config files.
* build-aux/augeas-gentest.pl: Helper to generate an
augeas test file, substituting in elements from the
example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
src/locking/test_libvirt_sanlock.aug,
src/locking/test_libvirt_sanlock.aug.in,
src/lxc/test_libvirtd_lxc.aug,
src/lxc/test_libvirtd_lxc.aug.in,
src/qemu/test_libvirtd_qemu.aug,
src/qemu/test_libvirtd_qemu.aug.in: Remove example
config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of doing
# example_config
use
#example_config
so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions
Also delete rogue trailing comma not allowed by lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* daemon/libvirtd.c: Set custom driver module dir if the current
binary name is 'lt-libvirtd' (indicating execution directly
from GIT checkout)
* src/driver.c, src/driver.h, src/libvirt_driver_modules.syms: Add
virDriverModuleInitialize to allow driver module location to
be changed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it
* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
in probes.d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver modules all use symbols which are defined in libvirt.so.
Thus for loading of modules to work, the binary that libvirt.so
is linked to must export its symbols back to modules. If the
libvirt.so itself is dlopen()d then the RTLD_GLOBAL flag must
be set. Unfortunately few, if any, programming languages use
the RTLD_GLOBAL flag when loading modules :-( This means is it
not practical to use driver modules for any libvirt client side
drivers (OpenVZ, VMWare, Hyper-V, Remote client, test).
This patch changes the build process so only server side drivers
are built as modules (Xen, QEMU, LXC, UML)
* daemon/libvirtd.c: Add missing load of 'interface' driver
* src/Makefile.am: Only build server side drivers as modules
* src/libvirt.c: Don't load any driver modules
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Adding syslog.target is obsolete, avahi.target does not
exist and dbus.target is also obsolete
Reported-by: Lennart Poettering <lpoetter@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 2223ea98 removed the only use of 'server' param in
remoteDispatchAuthPolkit(). Mark the parameter with ATTRIBUTE_UNUSED
to fix the build when configuring with polkit0.
Due to a bug in editing /etc/sysconfig/libvirtd, VDSM was causing
libvirt processes to run with the following command line args
/usr/sbin/libvirtd --listen '#' 'by vdsm'
While it correctly rejects any invalid option flags, libvirtd
was not rejecting any non-option command line arguments
* daemon/libvirtd.c: Reject non-option argv
There is no 'udev.target' unit in systemd (only 'udev.service')
yet libvirtd's unit file had a dep on one. There's no compelling
reason for a dep on udev, so remove it altogether.
Reported-by: Avi Kivity <avi@redhat.com>
The current unprivileged user libvirtd sockets are in the abstract
namespace. This has a number of problems
- You can't connect to them remotely using the nc/ssh tunnel
- This is not portable for OS-X, BSD & probably others
- Parent directory permissions don't apply
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
* daemon/libvirtd-config.c (daemonConfigFree): fix memory leaks.
How to reproduce?
% make && make -C tests check TESTS=libvirtdconftest
% cd tests && valgrind -v --leak-check=full ./libvirtdconftest
actual result:
==11008== 185 bytes in 5 blocks are definitely lost in loss record 3 of 5
==11008== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==11008== by 0x39CF07F6E1: strdup (strdup.c:43)
==11008== by 0x406626: daemonConfigLoadOptions (libvirtd-config.c:438)
==11008== by 0x406800: daemonConfigLoadData (libvirtd-config.c:492)
==11008== by 0x403CCF: testCorrupt (libvirtdconftest.c:110)
==11008== by 0x404FAD: virtTestRun (testutils.c:145)
==11008== by 0x403A34: mymain (libvirtdconftest.c:219)
==11008== by 0x404687: virtTestMain (testutils.c:700)
==11008== by 0x39CF01ECDC: (below main) (libc-start.c:226)
==11008==
==11008== LEAK SUMMARY:
==11008== definitely lost: 185 bytes in 5 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Rename existing daemonConfigLoad API to daemonConfigLoadFile and
add an alternative daemonConfigLoadData
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Add
daemonConfigLoadData and rename daemonConfigLoad to
daemonConfigLoadFile
* daemon/libvirtd.c: Update for renamed API
To enable creation of unit tests, split the libvirtd config file
loading code out into separate files.
* daemon/libvirtd.c: Delete config loading code / structs
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Config
file loading APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* configure.ac: Set WITH_SYSCTL only on Linux hosts
* daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Jason Helfman <jhelfman@e-e.com>
