IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The table was manually converted to a set of 'list-table'-s for better
experience of viewing the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also update the link from 'formatstorageencryption' to the
'usage-type-volume' anchor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extra care is taken to preserve the 'codeofconduct' anchor which is used
in our page template. Upcoming patch will change that but we'll retain
the anchor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Special care is given to preserve the 'quality' anchor in the 'bugs'
page as we link to it directly from the gitlab issue template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The page is not referenced from anywhere and contains dead links for the
output and links to old repos.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The page isn't linked from anywhere and the project was archived.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
An update to meson 0.61.1 meant that it started showing warnings due to the fact
that the default for run_command's 'check' parameter is going to change. It
unveiled the fact that we were even missing that parameter in some calls where
we expected different outcome. To make sure the behaviour does not change
specify the parameter explicitly. In places where we check for the return code
the parameter should be 'false' so that meson does not fail. In all other cases
the parameter should be set to 'true' to make sure possible failure also stops
meson.
The warning in meson was added in https://github.com/mesonbuild/meson/pull/9304
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Detect these commands in docs/meson.build, i.e. only when
users enable documentation.
Signed-off-by: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This unclutters the top-level docs directory.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This unclutters the top-level docs directory.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Apart from the bulk conversion itself, the section names 'general
metadata' and 'target elements' were duplicated between the storage pool
and storage volume sections. To prevent heading name clashes they were
renamed appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The internals/eventloop document uses two images for
illustrative purposes, but unlike other graphics included
in the documentation these are not part of libvirt.git but
rather were added to libvirt-media.git with
commit fae5622074cf5e18d190496f8a43260c614599b2
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Mon Jun 6 17:27:50 2016 +0200
Add two event loop images
These images are going to be used in our documentation of the
event loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
fae5622074
and are requested directly from there. Specifically, the
URLs point to the libvirt.org mirror of libvirt-media.git
instead of the primary repository hosted on GitLab.
Import the images into libvirt.git so that the website
doesn't rely on external resources and can, if desired, be
browsed entirely offline from installed packages.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After conversion the table doesn't have to custom colors, but otherwise
seems to hold well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The meson 0.60.0 release introduced a bug with the '/' operator when
using an empty path component. '/foo' / '' will now result in '/foo'
not '/foo/'
https://github.com/mesonbuild/meson/issues/9450
This breaks libvirt because xsltproc requires the trailing '/' on the
output directory path. Fortunately the explicit 'join_paths' function
is not affected by the regression
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we expose libvirt Go packages at
libvirt.org/libvirt-go
libvirt.org/libvirt-go-xml
These packages have not supported Go modules historically and when we
tried to introduce modules, we hit the problem that we're not using
semver for versioning.
The only way around this is to introduce new packages under a different
namespace, that will have the exact same code, but be tagged with a
different version numbering scheme.
This change proposes:
libvirt.org/go/libvirt
libvirt.org/go/libvirtxml
Note the hyphen is removed so that the import basename matches the
Go package name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
There are two links to this document using anchors so they need to be
updated as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The page isn't linked from anywhere and the contents is dated.
Images related to the page are also dropped.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There were a number of occurrences where we used nested inline markup
(verbatim + refs) which is currently not possible with RST syntax [1].
There is a possible workaround involving substitution definitions like
.. |virConnectPtr| replace:: ``virConnectPtr``
.. _virConnectPtr: /html/libvirt-libvirt-host.html#virConnectPtr
Substitutions cannot be made generic, hence we cannot create a template
for substitution and use a single template everywhere, so we'd end up
with a lot of clutter and convolution. Therefore, we can make an
exception and just link the data type without further style markup.
[1] https://docutils.sourceforge.io/FAQ.html#is-nested-inline-markup-possible
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move docs/kbase.rst to docs/kbase/index.rst so that the directory itself
shows our index page rather than the autogenerated list of files by the
webserver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Meson unfortunately doesn't give us any means to share the code using
xsltproc to output HTMLs processed by our template. This means we will
have to resort to copy&paste engineering.
To make things simpler, let's use the same block of code in
docs/meson.build but also any of the subdirs which generate htmls.
This will be achieved by making it configurable and wrapping it in a
comment that instructs anybody editing it to keep it identical.
We need to be able to configure the template file used and installation
directory. The rest of the processing is same as we do in
docs/meson.build.
This code will then be copied to subdirs to refactor the current
approach used there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since we no longer reformat the XSLT-transformed files, there's no need
to use an external script any more.
Unfortunately this hid errors from 'xsltproc' as return value was not
checked and the stderr was piped into xmllints stdin. The result was
that any invalid input file would result into an empty output file.
Since the script's only purpose was to prevent additional temporary
files at the time we were reformatting the output in a pipeline we no
longer need this.
Moving the generation directly into the meson definition makes it more
obvious what's happening and saves readers from having to parse what's
going on. A free bonus is that errors are now properly caught and
reported.
This patch converts the main docs/ directory for now with cleanup of
other comming later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Only 'acl.html' output file includes that file so there's no need to
make everything depend on it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We switched to meson in the meantime so the conversion
to HTML has to be explicitly requested.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
For now just plain conversion to rst. Anchors which existed until now
are preserved, but the table of contents now uses the docutils-generated
ones.
Additionally <code> which was nested in a link (<a>) was removed as rst
doesn't support nesting of inline markup.
The only anchor which wasn't restored is
'elementsDiskBackingStoreIndex' and its only reference was removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'docutils' add a stylesheet to the output html file for direct
consumption. Since we use the html files just as an intermediate step
which is post-processed to add our own stylesheet and drop the docutils
one in the process we can ask 'rst2html' to not add any for an
intermediate file with less garbage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
NEWS.rst is based in the root of the repository and 'hvsupport.html'
doesn't have a backing file which can be edited since it's fully
generated. Our 'contribute -> edit this page' link on the bottom of the
page is wrong in those cases.
Fix it by adding the contribute section only when there's a source and
base the 'source' of a html file in the root of the repository.
Along with that we need to modify the scripts/meson-html-gen.py script
to accept optional 'pagesrc' and the XSL template to skip the
'contribute' section when we don't have a source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just convert 'docs_html_in_files' into 'docs_html_in_gen'. The target
definitions for those were almost the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
