IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently 'virsh perf domain' errors out as the perf nparams is
incorrectly compared against REMOTE_DOMAIN_MEMORY_PARAMETERS_MAX
instead of REMOTE_DOMAIN_PERF_EVENTS_MAX.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When providing explicit x509 cert/key paths in libvirtd.conf,
the user must provide all three. If one or more is missed,
this leads to obscure errors at runtime when negotiating
the TLS session
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Linux still defaults to a 1024 open file handle limit. This causes
scalability problems for libvirtd / virtlockd / virtlogd on large
hosts which might want > 1024 guest to be running. In fact if each
guest needs > 1 FD, we can't even get to 500 guests. This is not
good enough when we see machines with 100's of physical cores and
TBs of RAM.
In comparison to other memory requirements of libvirtd & related
daemons, the resource usage associated with open file handles
is essentially line noise. It is thus reasonable to increase the
limits unconditionally for all installs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RFC 6331 documents a number of serious security weaknesses in
the SASL DIGEST-MD5 mechanism. As such, libvirtd should not
by using it as a default mechanism. GSSAPI is the only other
viable SASL mechanism that can provide secure session encryption
so enable that by defalt as the replacement.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Pass the registration function name to virDriverLoadModule so that we
can later call specific functions if necessary (e.g. for testing
purposes). This gets rid of the rather ugly automatic name generator and
unifies the code to load/initialize the modules.
It's also clear which registration function gets called.
Since a successful completion of the calls to openvswitch is expected
a longer timeout should be able to be chosen to account for loaded systems.
Therefore this patch provides the ability to specify the timeout value for
openvswitch calls in the libvirtd configuration file.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Provide the ability to specify a default timeout value for
successful completion of openvswitch calls in the libvirtd
configuration file.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After deploying virtlogd by default we identified a number of
mistakes in the systemd unit file. virtlockd's relationship
to libvirtd is the same as virtlogd, so we must apply the
same unit file fixes to virtlockd
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1332019
This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.
NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).
The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.
In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Enable libvirt users to modify daemon's logging output settings from outside.
If either an empty string or NULL is passed, a default logging output will be
used the same way as it would be in case writing an empty string to the
libvirtd.conf
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Now that virLog{Get,Set}DefaultOutput routines are introduced we can wire them
up to the daemon's logging initialization code. Also, change the order of
operations a bit so that we still strictly honor our precedence of settings:
cmdline > env > config now that outputs and filters are not appended anymore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Along with an empty string, it should also be possible for users to pass
NULL to the public APIs which in turn would trigger a routine(future
work) responsible for defining an appropriate default logging output
given the current circumstances.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When trying to install libvirtd from sources I've noticed the
following failure:
/usr/bin/install: cannot stat 'virt-guest-shutdown.target': No such file or directory
Makefile:2792: recipe for target 'install-init-systemd' failed
make[3]: *** [install-init-systemd] Error 1
make[3]: *** Waiting for unfinished jobs....
The problem is that while other files around that location in
Makefile are firstly generated into the builddir and only after
that installed, virt-guest-shutdown.target file is not generated
at all and should be installed from the srcdir.
This was introduced in 01079727.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Do not dereference the 'dmn' until after the virStateCleanup is completed.
During initialization, virStateInitialize requires/uses the "dmn" as the
argument to/for the daemonInhibitCallback functions. Thus, cleanup cannot
dereference 'dmn' until after calling the virStateCleanup which calls the
the daemonInhibitCallback using 'dmn'; otherwise, the following crash occurs:
backtrace (shortened a bit)
1 0x00007fd3a791b2e6 in virCondWait (c=<optimized out>, m=<optimized out>)
at util/virthread.c:154
2 0x00007fd3a791bcb0 in virThreadPoolFree (pool=0x7fd38024ee00)
at util/virthreadpool.c:266
3 0x00007fd38edaa00e in qemuStateCleanup () at qemu/qemu_driver.c:1116
4 0x00007fd3a79abfeb in virStateCleanup () at libvirt.c:808
5 0x00007fd3a85f2c9e in main (argc=<optimized out>, argv=<optimized out>)
at libvirtd.c:1660
Thread 1 (Thread 0x7fd38722d700 (LWP 32256)):
0 0x00007fd3a7900910 in virClassIsDerivedFrom
(klass=0xdfd36058d4853, parent=0x7fd3a8f394d0) at util/virobject.c:169
1 0x00007fd3a7900c4e in virObjectIsClass
(anyobj=anyobj@entry=0x7fd3a8f2f850, klass=<optimized out>)
at util/virobject.c:365
2 0x00007fd3a7900c74 in virObjectLock (anyobj=0x7fd3a8f2f850)
at util/virobject.c:317
3 0x00007fd3a7a24d5d in virNetDaemonRemoveShutdownInhibition
(dmn=0x7fd3a8f2f850) at rpc/virnetdaemon.c:547
4 0x00007fd38ed722cf in qemuProcessStop
(driver=driver@entry=0x7fd380103810, vm=vm@entry=0x7fd38025b6d0,
reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN,
asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=flags@entry=0)
at qemu/qemu_process.c:5786
5 0x00007fd38edd9428 in processMonitorEOFEvent
(vm=0x7fd38025b6d0, driver=0x7fd380103810) at qemu/qemu_driver.c:4588
6 qemuProcessEventHandler (data=<optimized out>, opaque=0x7fd380103810)
at qemu/qemu_driver.c:4632
7 0x00007fd3a791bb55 in virThreadPoolWorker
(opaque=opaque@entry=0x7fd3a8f1e4c0) at util/virthreadpool.c:145
Similar to outputs, parser should do parsing only, thus the 'define' logic
is going to be stripped from virLogParseAndDefineFilters by replacing calls to
this method to virLogSetFilters instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since virLogParseAndDefineOutputs is going to be stripped from 'output defining'
logic, replace all relevant occurrences with virLogSetOutputs call to make the
change transparent to all original callers (daemons mostly).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Right now virLogParse* functions are doing both parsing and defining of filters
and outputs which should be two separate operations. Since the naming is
apparently a bit poor this patch renames these functions to
virLogParseAndDefine* which eventually will be replaced by virLogSet*.
Additionally, virLogParse{Filter,Output} will be later (after the split) reused,
so that these functions do exactly what the their name suggests.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We already guarantee that virtlogd.socket is enabled/disabled
along with libvirtd.service, but if libvirtd.service has just
been installed and is started before rebooting, then
virtlogd.socket will not be running and guest startup will
fail.
Add Requires=virtlogd.socket to libvirtd.service to make sure
virtlogd.socket is always started along with libvirtd.service,
and add Before=libvirtd.service to both virtlogd.socket and
virtlogd.service so that virtlogd never disappears before
libvirtd has exited.
Also add PartOf=libvirtd.service to both virtlogd.socket and
virtlogd.service, so that virtlogd can be shut down when not
needed.
Resolves: https://bugzilla.redhat.com/1372576
This way we make naming consistent to API calls and make subsequent
ACL checks possible (otherwise ACL check would discover name
discrepancies).
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
Once the SASL authentication process has successfully passed, we should also
save the SASL username used to client's identity, so that when a client like
virt-admin tries to obtain it, the server will actually format the username to
the response data.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When commit 4a0e9108 added a support for client information retrieval, it made
the API return SASL identity info only for clients connected remotely, yet SASL
can be happily used with UNIX sockets as well.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virNetServerClientGetInfo returns the client's remote address
as a string, which is a part of the client object.
Use VIR_STRDUP to make a copy which can be freely accessed
even after the virNetServerClient object is unlocked.
To reproduce, put a sleep between virObjectUnlock in
virNetServerClientGetInfo and virTypedParamsAddString in
adminClientGetInfo, then close the queried connection during
that sleep.
https://bugzilla.redhat.com/show_bug.cgi?id=1343442
When a client connects, it is placed into a queue. As soon as it
authenticate, it is taken out of that queue and placed into a
different one. Now, we have a setting in the daemon config file
that allows users to control the length of the queue of yet not
authenticated clients. By default, it has a value 20 but in the
description to the config knob we clam it's zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This partially reverts commit 9b45c9f049.
It changed the default format of socket address from the one SASL
requires, but did not adjust all the callers.
It also removed the test coverage for it.
Revert most of the changes except the virSocketAddrFormatFull support
for URI-formatted strings.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1345743 while
reverting the format used by virt-admin's client-info command from
the URI one to the SASL one.
https://bugzilla.redhat.com/show_bug.cgi?id=1345743
Add a "tls_priority" config option to /etc/libvirt/libvirtd.conf
to allow the administrator to override the built-in default
setting. This only affects the server side configuration.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the virNetTLSContextNew* constructors to allow
the TLS priority string to be passed in, overriding the
compile time default.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Opposite operation to virAdmServerGetClientLimits. Understandably though,
setting values for current number of clients connected or still waiting
for authentication does not make sense, since changes to these values are event
dependent, i.e. a client connects - counter is increased. Thus only the limits
to maximum clients connected and waiting for authentication can be set. Should
a request for other controls to be set arrive (provided such a setting will
be first introduced to the config), the set of configuration controls can be
later expanded (thanks to typed params). This patch also introduces a
constraint that the maximum number of clients waiting for authentication has to
be less than the overall maximum number of clients connected and any attempt to
violate this constraint will be denied.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enable retrieval of the number of maximum clients connected to all sockets
combined, as well as the number of maximum clients waiting for authentication,
in order to be successfully connected. These are the attributes configurable
through libvirtd.conf, however, it could be handy to not only know values for
these limits, but also the values for the current number of clients
connected and number of clients currently waiting for authentication which are
changing dynamically. This API does both, retrieves the limits as well as the
current dynamic values.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When registering admin UNIX socket, a new service is created for it. This
service is incorrectly initialized to be readonly, which is later inherited by
all clients connected to the socket. In libvirt-admin's case there currently
isn't any use for the attribute anyway, but since the socket has root-only
access permissions, the least we can do is to make every admin client
connected to it report readonly as false.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Once we're able to list and identify all clients connected to a specific
server, we can then support force-closing a connection. This patch introduces
a simple API calling virNetServerClientClose on a specific client, which
can be later extended easily, e.g. by sending an event once the client is
disconnected successfully.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
