IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The --disk-password argument was present in early impls of the patch but
replaced by the more generic --inject-secret argument.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As of commit 9e3cc0ff5 the virtsecretd daemon does not timeout
while it keeps any ephemeral secrets.
https://bugzilla.redhat.com/show_bug.cgi?id=2035985
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove the reference to "running domains" for daemons that happily
exit while domains are running.
https://bugzilla.redhat.com/show_bug.cgi?id=2035985
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
For unmanaged ethernet <interface/>, it is user's responsibility
to set up the interface. And as such it can be just anything.
Therefore, it's (almost) impossible for the
virDomainInterfaceStats() API to tell whether RX/TX values need
to be swapped or copied verbatim into the return structure.
Document this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The --loader syntax was left over from an earlier version of the code
before it was renamed to --firmware.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The manpages for 'virt-pki-query-dn', 'virt-qemu-qmp-proxy' and
'virt-ssh-helper.rst' were not referenced from the manpage index or any
other place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the examples refer to virt-dom-sev-validate. Replace them with
the proper name.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The limits are different with cgroups v1 and v2 but our XML
documentation and virsh manpage mentioned only cgroups v1 limits without
explicitly saying it only applies to cgroups v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In commit c43718ef67 I've added a disclaimer that the new stats which
are fetched from qemu and passed directly to the user are not guaranteed
by libvirt. I didn't notice that per-vcpu hypervisor specific stats are
also snuck into the VIR_DOMAIN_STATS_VCPU group along with other
pre-existing stats we do guarantee.
Extend the disclaimer for VIR_DOMAIN_STATS_VCPU too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Despite efforts to make the virt-qemu-sev-validate tool friendly, it is
a certainty that almost everyone who tries it will hit false negative
results, getting a failure despite the VM being trustworthy.
Diagnosing these problems is no easy matter, especially for those not
familiar with SEV/SEV-ES in general. This extra docs text attempts to
set out a checklist of items to look at to identify what went wrong.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is possible to build OVMF for SEV with an embedded Grub that can
fetch LUKS disk secrets. This adds support for injecting secrets in
the required format.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When validating a SEV-ES guest, we need to know the CPU count and VMSA
state. We can get the CPU count directly from libvirt's guest info. The
VMSA state can be constructed automatically if we query the CPU SKU from
host capabilities XML. Neither of these is secure, however, so this
behaviour is restricted.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VMSA files contain the expected CPU register state for the VM. Their
content varies based on a few pieces of the stack
- AMD CPU architectural initial state
- KVM hypervisor VM CPU initialization
- QEMU userspace VM CPU initialization
- AMD CPU SKU (family/model/stepping)
The first three pieces of information we can obtain through code
inspection. The last piece of information we can take on the command
line. This allows a user to validate a SEV-ES guest merely by providing
the CPU SKU information, using --cpu-family, --cpu-model,
--cpu-stepping. This avoids the need to obtain or construct VMSA files
directly.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the SEV-ES policy the VMSA state of each vCPU must be included in
the measured data. The VMSA state can be generated using the 'sevctl'
tool, by telling it a QEMU VMSA is required, and passing the hypevisor's
CPU SKU (family, model, stepping).
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When connected to libvirt we can validate that the guest configuration
has the kernel hashes property enabled, otherwise including the kernel
GUID table in our expected measurements is not likely to match the
actual measurement.
When running locally we can also automatically detect the kernel/initrd
paths, along with the cmdline string from the XML.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When doing direct kernel boot we need to include the kernel, initrd and
cmdline in the measurement.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Accept information about a connection to libvirt and a guest on the
command line. Talk to libvirt to obtain the running guest state and
automatically detect as much configuration as possible.
It will refuse to use a libvirt connection that is thought to be local
to the current machine, as running this tool on the hypervisor itself is
not considered secure. This can be overridden using the --insecure flag.
When querying the guest, it will also analyse the XML configuration in
an attempt to detect any options that are liable to be mistakes. For
example the NVRAM being measured should not have a persistent varstore.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-qemu-sev-validate program will compare a reported SEV/SEV-ES
domain launch measurement, to a computed launch measurement. This
determines whether the domain has been tampered with during launch.
This initial implementation requires all inputs to be provided
explicitly, and as such can run completely offline, without any
connection to libvirt.
The tool is placed in the libvirt-client-qemu sub-RPM since it is
specific to the QEMU driver.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow users to request validation of the storage volume XML. Add new
flag and virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The node device APIs which get XML from the user don't yet support XML
validation flags. Introduce virNodeDeviceCreateXMLFlags and
virNodeDeviceDefineXMLFlags with the appropriate flags and add virsh
support for the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The original patches adding the functionality neglected to add any form
of documentation for the stats fields returned for this group.
The stats are directly converted from qemu's 'query-stats(-schema)' QMP
command without any further interpretation. The 'query-stats-schema' has
the following disclaimer:
Note: runtime-collected statistics and their names fall outside QEMU's usual
deprecation policies. QEMU will try to keep the set of available data
stable, together with their names, but will not guarantee stability
at all costs; the same is true of providers that source statistics
externally, e.g. from Linux. For example, if the same value is being
tracked with different names on different architectures or by different
providers, one of them might be renamed. A statistic might go away if
an algorithm is changed or some code is removed; changing a default
might cause previously useful statistics to always report 0. Such
changes, however, are expected to be rare.
Since libvirt is not doing any form of conversion of the stats we can't
meaningfully document any of the returned fields. At the same time we
can't even meaningfully provide any form of API stability for the field
names.
Modify the documentation for the 'VIR_DOMAIN_STATS_VM' group both in the
API docs and in the virsh man page to reflect that and disclaim any form
of stability guarantees we provide normally.
Fixes: 8c9e3dae14
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is part of our man page that describes how to switch to the
traditional (non-socket) activation but it might still happens sometimes that
there is an extra --timeout option specified for the daemon.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the setup of the modular daemon service files the reverting to non-socket
activated daemons could have never worked. The reason is that masking the
socket files prevents starting the daemons since they require (as in Requires=
rather than Wants= in the service file) the sockets. On top of that it creates
issues with some libvirt-guests setups and needlessly increases our support
matrix.
Nothing prevents users to modify their setup in a way that will still work
without socket activation, but supporting such setup only creates burden on our
part.
This technically reverts most of commit 59d30adacd except the change made to
the libvirtd manpage since the monolithic daemon still supports traditional mode
of starting even on systemd.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The build_root() method is deprecated in 0.56.0 and we're
recommended to use project_build_root() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option can be used as a shortcut for creating a single XML with
just a CPU model name and no features:
$ virsh hypervisor-cpu-baseline --model Skylake-Server
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Skylake-Server</model>
<feature policy='disable' name='avx512f'/>
<feature policy='disable' name='avx512dq'/>
<feature policy='disable' name='clwb'/>
<feature policy='disable' name='avx512cd'/>
<feature policy='disable' name='avx512bw'/>
<feature policy='disable' name='avx512vl'/>
<feature policy='disable' name='pku'/>
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt provides QMP passthrough APIs for the QEMU driver and these are
exposed in virsh. It is not especially pleasant, however, using the raw
QMP JSON syntax. QEMU has a tool 'qmp-shell' which can speak QMP and
exposes a human friendly interactive shell. It is not possible to use
this with libvirt managed guest, however, since only one client can
attach to the QMP socket at any point in time. While it would be
possible to configure a second QMP socket for a VM, it may not be
an known requirement at the time the guest is provisioned.
The virt-qmp-proxy tool aims to solve this problem. It opens a UNIX
socket and listens for incoming client connections, speaking QMP on
the connected socket. It will forward any QMP commands received onto
the running libvirt QEMU guest, and forward any replies back to the
QMP client. It will also forward back events.
$ virsh start demo
$ virt-qmp-proxy demo demo.qmp &
$ qmp-shell demo.qmp
Welcome to the QMP low-level shell!
Connected to QEMU 6.2.0
(QEMU) query-kvm
{
"return": {
"enabled": true,
"present": true
}
}
Note this tool of course has the same risks as the raw libvirt
QMP passthrough. It is safe to run query commands to fetch information
but commands which change the QEMU state risk disrupting libvirt's
management of QEMU, potentially resulting in data loss/corruption in
the worst case. Any use of this tool will cause the guest to be marked
as tainted as an warning that it could be in an unexpected state.
Since this tool introduces a python dependency it is not desirable
to include it in any of the existing RPMs in libvirt. This tool is
also QEMU specific, so isn't appropriate to bundle with the generic
tools. Thus a new RPM is introduced 'libvirt-clients-qemu', to
contain additional QEMU specific tools, with extra external deps.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After some debugging and discussion with systemd team it turns out we
are misusing the ordering in libvirt-guests.service. That happened
because we want to support both monolithic and modular daemon setups and
on top of that we also want to support socket activation and services
without socket activation. Unfortunately this is impossible to express
in the unit file because of how transactions are handled in systemd when
dependencies are resolved and multiple actions (jobs) are queued. For
explanation from Michal Sekletar see comment #7 in the BZ this patch is
fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1964855#c7
In order to support all the scenarios this patch also amends the
manpages so that users that are changing the default can also read how
to correct the dependency ordering in libvirt-guests unit file.
Ideally we would also keep the existing configuration during upgrade,
but due to our huge support matrix this seems hardly feasible as it
could introduce even more problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a simple command to drive the new 'virAdmConnectSetDaemonTimeout'
API.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While you can chain the virsh output up to a later 'xmllint' or 'xpath'
command, integrating it into virsh avoids needs for installing extra
binaries which we've often found to be missing on production installs
of libvirt. It also gives better response if the initial virsh command
hits an error, as you don't get an aborted pipeline.
$ virsh pool-dumpxml --xpath //permissions default
<permissions>
<mode>0711</mode>
<owner>1000</owner>
<group>1000</group>
<label>unconfined_u:object_r:svirt_home_t:s0</label>
</permissions>
If multiple nodes match, they are emitted individually:
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
but if intending to post-process the output further, the results
can be wrapped in a parent node
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<nodes>
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
</nodes>
Fixes https://gitlab.com/libvirt/libvirt/-/issues/244
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since virsh implements a wrapper over virDomainSetIOThreadParams()
(command iothreadset) let's wire up new typed parameters there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add these XML formats validation in manpage or script:
cpu, domainbackup, domaincaps, domaincheckpoint, networkport,
storagepoolcaps.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Useful for knowing how to construct the XML and debugging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Additionally hyperlinks in other parts of the documentation are updated
to match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 42d36b65a3 added new fields to the API docs but didn't add the
virsh man page equivalent.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2073867
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we had two top level XSL files for top level and nested
documents which only differ in what they pass for 'href_base' to the
main 'page.xsl' file.
We can instead pass the variable as argument from the build system so
that we have just one XSL file and also allow for more nested document
trees in the future.
The '404' page is special even with the current XSL way so we add a
special case for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The KVM device assignment was removed in v5.7.0-rc1~103 but virsh
and its manpage still mention it. Don't do that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
