1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 01:34:11 +03:00
Commit Graph

71 Commits

Author SHA1 Message Date
Pino Toscano
b4e34d1083 vmx: write firmware back from autoselection
When writing the VMX file from the domain XML, write the firmware key
according to the firmware autoselection.  Though, at the moment only
'efi' is supported.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
2019-04-15 20:03:55 -04:00
Erik Skultety
5165ff0971 src: More cleanup of some system headers already contained in internal.h
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:39 +02:00
Erik Skultety
9403b63102 internal: Move <stdio.h> include to internal.h
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:38 +02:00
Pino Toscano
f10a1a95a2 vmx: write cpuid.coresPerSocket back from CPU topology
When writing the VMX file from the domain XML, write
cpuid.coresPerSocket if there is a specified CPU topology in the guest.

Use the domain XML of esx-in-the-wild-9 in vmx2xml as testcase for
xml2vmxtest.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-04-20 09:11:01 +02:00
Andrea Bolognani
3e7db8d3e8 Remove backslash alignment attempts
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-11-03 13:24:12 +01:00
Michal Privoznik
4f0aeed871 virDomainXMLOption: Introduce virDomainABIStabilityDomain
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-06-05 09:08:52 +02:00
Andrea Bolognani
4ceac4bf29 tests: Rename VIRT_TEST_* macros to VIR_TEST_*
We use the "vir" prefix pretty consistently in our
APIs, both external and internal, which made these
macros stood out.
2017-04-04 17:30:03 +02:00
Michal Privoznik
c41b989112 virDomainDefParse{File,String}: Introduce @parseOpaque argument
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-09-26 16:50:12 +02:00
Tomáš Ryšavý
239caffb1d tests: Rename virtTestCompareToFile to virTestCompareToFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Michal Privoznik
35c3aab44d vmx: Adapt to emptyBackingString for cdrom-image
https://bugzilla.redhat.com/show_bug.cgi?id=1266088

We are missing this value for cdrom-image device. It seems like
there's no added value to extend this to other types of disk
devices [1].

1: https://www.redhat.com/archives/libvir-list/2016-January/msg01038.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-25 08:34:23 +01:00
Matthias Bolte
636a990587 vmx: Expose datacenter path in domain XML
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.

Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
2015-09-17 11:34:54 +01:00
Matthias Bolte
98d8c811ce vmx: Add handling for CDROM devices with SCSI passthru
https://bugzilla.redhat.com/show_bug.cgi?id=1172544
2015-09-07 22:19:42 +02:00
Cole Robinson
ca32929908 tests: Add virtTestCompareToFile
Replaces a common pattern used in many test files
2015-04-23 17:08:48 -04:00
Cole Robinson
bdbe26b504 tests: Use *DefParseFile more 2015-04-23 17:08:48 -04:00
Cole Robinson
835cf84b7e domain: conf: Drop expectedVirtTypes
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
2015-04-20 16:43:43 -04:00
Cole Robinson
4fa6f9b413 caps: Convert to use VIR_DOMAIN_VIRT internally 2015-04-20 16:40:26 -04:00
Cole Robinson
d0440e3269 caps: Switch AddGuest to take VIR_DOMAIN_OSTYPE value
Rather than an opencoded string. This should be a no-op
2015-04-20 16:38:09 -04:00
Daniel P. Berrange
0ecd685109 Give virDomainDef parser & formatter their own flags
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
2015-01-13 16:26:12 +00:00
Martin Kletzander
f5e65e4b71 Remove unnecessary curly brackets in tests/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:36 +01:00
Eric Blake
58156f39ce capabilities: use bool instead of int
While preparing to add a capability for active commit, I noticed
that the existing code was abusing int for boolean values.

* src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost)
(virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve
types.
* src/conf/capabilities.c (virCapabilitiesNew)
(virCapabilitiesAddGuestFeature): Adjust signature.
* src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update
clients.
* src/esx/esx_driver.c (esxCapsInit): Likewise.
* src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise.
* src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise.
* src/openvz/openvz_conf.c (openvzCapsInit): Likewise.
* src/parallels/parallels_driver.c (parallelsBuildCapabilities):
Likewise.
* src/phyp/phyp_driver.c (phypCapsInit): Likewise.
* src/qemu/qemu_capabilities.c (virQEMUCapsInit)
(virQEMUCapsInitGuestFromBinary): Likewise.
* src/security/virt-aa-helper.c (get_definition): Likewise.
* src/test/test_driver.c (testBuildCapabilities): Likewise.
* src/uml/uml_conf.c (umlCapsInit): Likewise.
* src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise.
* src/vmware/vmware_conf.c (vmwareCapsInit): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities):
Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject): Likewise.
* tests/qemucaps2xmltest.c (testGetCaps): Likewise.
* tests/testutils.c (virTestGenericCapsInit): Likewise.
* tests/testutilslxc.c (testLXCCapsInit): Likewise.
* tests/testutilsqemu.c (testQemuCapsInit): Likewise.
* tests/testutilsxen.c (testXenCapsInit): Likewise.
* tests/vircaps2xmltest.c (buildVirCapabilities): Likewise.
* tests/vircapstest.c (buildNUMATopology): Likewise.
* tests/vmx2xmltest.c (testCapsInit): Likewise.
* tests/xml2vmxtest.c (testCapsInit): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-14 08:00:46 -06:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Daniel P. Berrange
53a699a07b Exercise the ABI stability check code in test suite
Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-01-10 20:32:48 +00:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Doug Goldstein
7ab7c9a2e9 VMX: Add a VMWare Fusion 5 configuration for tests
A user was having an issue with this specific VMWare Fusion config and
he gave me permission to add it as part of our test suite to further
expand our VMX test coverage. Unfortunately our VMX parser and
generator does not support many features contained within and just
silently ignores fields it does not understand so they had to
be removed out in the xml2vmx test. The original unmodified version
exists in the vmx2xml test.
2013-09-17 14:10:41 -05:00
Doug Goldstein
834aebcc2f VMX: Add support for 'auto detect' fileNames
VMWare Fusion 5 can set the CD-ROM's device name to be 'auto detect' when
using the physical drive via 'cdrom-raw' device type. VMWare will then
connect to first available host CD-ROM to the virtual machine upon start
up according to VMWare documentation. If no device is available, it
appears that the device will remain disconnected.

To better model this a CD-ROM that is marked as "auto detect" when in
the off state would be modeled as the following with this patch:
  <disk type='block' device='lun'>
    <source startupPolicy='optional'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>

Once the domain transitions to the powered on state, libvirt can
populate the remaining source data with what is connected, if anything.
However future power cycles, the domain may not always start with that
device attached.
2013-09-17 14:10:40 -05:00
Doug Goldstein
f8456e5a18 VMX: Add cdrom-raw dev type from VMWare Fusion
According to VMWare's documentation 'cdrom-raw' is an acceptable value
for deviceType for a CD-ROM drive. The documentation states that the VMX
configuration for a CD-ROM deviceType is as follows:

ide|scsi(n):(n).deviceType = "cdrom-raw|atapi-cdrom|cdrom-image"

From the documentation it appears the following is true:
- cdrom-image = Provides the ISO to the VM
- atapi-cdrom = Provides a NEC emulated ATAPI CD-ROM on top of the host
  CD-ROM
- cdrom-raw = Passthru for a host CD-ROM drive. Allows CD-R burning from
  within the guest.

A CD-ROM prior to this patch would always provide an 'atapi-cdrom' is
modeled as:
  <disk type='block' device='cdrom'>
    <source dev='/dev/scd0'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>

This patch allows the 'device' attribute to be set to 'lun' for a raw
acccess CD-ROM such as:
  <disk type='block' device='lun'>
    <source dev='/dev/scd0'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>
2013-09-02 17:41:30 -05:00
Michal Privoznik
e60b9783e1 Adapt to VIR_STRDUP and VIR_STRNDUP in tests/* 2013-05-10 11:54:29 +02:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Osier Yang
2beae9c202 cleanup: Only include testutils.h once
No reason to include it in both "if" and "else" branches.
2013-04-17 15:41:04 +08:00
Peter Krempa
482e5f159c virCaps: get rid of defaultConsoleTargetType callback
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
2013-04-04 22:42:39 +02:00
Peter Krempa
46becc18ba virCaps: get rid of macPrefix field
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
2013-04-04 22:42:38 +02:00
Peter Krempa
8960d65674 virCaps: get rid of hasWideScsiBus
Use the virDomainXMLConf structure to hold this data.
2013-04-04 22:42:38 +02:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
43b99fc4c0 conf: Add post XML parse callbacks and prepare for cleaning of virCaps
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.

With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.

Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
  - called for a single device parsed and for every single device in a
    domain config. A virDomainDeviceDefPtr is passed along with the
    domain definition and virCaps.

* virDomainDefPostParseCallback, (domainPostParseCallback)
  - A callback that is meant to process the domain config after it's
  parsed.  A virDomainDefPtr is passed along with virCaps.

Both types of callbacks support arbitrary opaque data passed for the
callback functions.

Errors may be reported in those callbacks resulting in a XML parsing
failure.
2013-04-04 22:29:48 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Daniel P. Berrange
fed92f08db Turn virCapabilities into a virObject
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:26 +00:00
John Ferlan
7ac12d84d0 tests: check and handle error for virAsprintf() calls 2013-01-04 10:57:20 -07:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
392c192240 Fix test cases for virArch changes 2012-12-18 19:32:23 +00:00
Viktor Mihajlovski
b1c88c1476 capabilities: defaultConsoleTargetType can depend on architecture
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.

Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.

Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.

N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-11-09 09:20:59 -07:00
Jean-Baptiste Rouault
1f2bd1072a vmx: handle shared folders formatting
This patch adds support for generating vmx files with
shared folders enabled.

Update test suite accordingly.
2012-07-21 19:45:02 +02:00
Jean-Baptiste Rouault
f246cdb5ac vmx: Better Workstation vmx handling
This patch adds support for vmx files with empty networkName
values (which is the case for vmx generated by Workstation).
It also adds support for vmx containing NATed network interfaces.

Update test suite accordingly
2012-02-24 11:53:23 +01:00
Eric Blake
da8061eefe build: properly skip tests
I got this failure on FreeBSD:

shunloadtest.c: In function 'main':
shunloadtest.c:150: error: 'EXIT_AM_SKIP' undeclared (first use in this function)

but inspection showed several other problems, all fixed here.

* tests/domainsnapshotxml2xmltest.c [!WITH_QEMU]: Ensure
EXIT_AM_SKIP is defined.
* tests/esxutilstest.c [!WITH_ESX]: Likewise.
* tests/openvzutilstest.c [!WITH_OPENVZ]: Likewise.
* tests/qemuargv2xmltest.c [!WITH_QEMU]: Likewise.
* tests/qemuhelptest.c [!WITH_QEMU]: Likewise.
* tests/qemuxml2argvtest.c [!WITH_QEMU]: Likewise.
* tests/qemuxml2xmltest.c [!WITH_QEMU]: Likewise.
* tests/qemuxmlnstest.c [!WITH_QEMU]: Likewise.
* tests/shunloadtest.c [!linux]: Likewise.
* tests/vmx2xmltest.c [!WITH_VMX]: Likewise.
* tests/xml2vmxtest.c [!WITH_VMX]: Likewise.
2011-12-01 13:49:20 -07:00
Daniel P. Berrange
209c2880b9 Fix default console type setting
The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.

A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.

* src/conf/capabilities.h: Use a callback for default console
  type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
  for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
  src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
  src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
  src/xenapi/xenapi_driver.c: Set default console type callback
2011-11-03 12:01:48 +00:00
Marc-André Lureau
8631bdc0c8 Rename virDomainControllerModel to virDomainControllerModelSCSI
Since we are about to add USB controller support let's remove the
ambiguity
2011-09-02 23:22:56 +08:00
Matthias Bolte
aa14709a47 Add domain type checking
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.
2011-07-11 19:38:51 +02:00
Matthias Bolte
4540f8d227 tests: Use EXIT_AM_SKIP instead of 77 directly 2011-07-09 10:14:38 +02:00
Matthias Bolte
8357d91b65 esx: Fix regression in absolute file name handling
Before commit 145d6cb05c (in August 2010) absolute file names
in VMX and domain XML configs were handled correctly. But this got
lost during the refactoring. The test cases didn't highlight this
problem because they have their own set of file name handling
functions. The actual ones require a real connection to an ESX
server. Also the test case functions always worked correctly.

Fix the regression and add a new in-the-wild VMX file that contains
such a problematic absolute path. Even though this test case won't
protect against new regressions.

Reported by lofic (IRC nick)
2011-05-26 23:32:44 +02:00