IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a technical detail in qemu that QCOW2 is needed for a pull-mode
backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virStorageFileChainLookup' reports an error when the lookup of the
backing chain entry is unsuccessful. Since we possibly use it multiple
times when looking up backing for 'disk->mirror' the function can report
error which won't be actually reported.
Replace the call to virStorageFileChainLookup by lookup in the chain by
index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use dummy variable to fill 'src' so that access to it doesn't need to be
conditionalized and use temporary variable for 'disk' rather than
dereferencing the array multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When removing SSH keys via set-user-sshkeys virsh command, then
files to remove are read from passed file. But when
experimenting, I've passed /dev/null as the file which resulted
in API checks which caught that @keys argument of
virDomainAuthorizedSSHKeysSet() can't be NULL. This is because if
the file is empty then its content is an empty string and thus
the buffer the file was read in to is not NULL.
Long story short, error is reported correctly, but it's not
necessary to go through public API to catch it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v6.10.0-rc1~104 I've added a virsh command that exposes
virDomainAuthorizedSSHKeysSet() API under "set-user-sshkeys"
command. The command accepts mutually exclusive "--reset" and
"--remove" options (among others). While the former controls the
VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_APPEND flag, the latter
controls the VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_REMOVE flag.
These flags are also mutually exclusive. But the code that sets
them has a logical error which may result in both flags being
set. In fact, this results in user being not able to set just the
remove flag.
Fixes: 87d12effbe
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1904674
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We previous added code for passing FDs which was explicitly derived from
gnulib's passfd code:
commit 17460825f3
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri Jan 17 11:57:17 2020 +0000
src: implement APIs for passing FDs over UNIX sockets
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.
while the license was unchanged, we mistakenly failed to copy the FSF
copyright header which is required by the license terms.
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since Xen 4.2 libxl expects device_model_override="/path" instead of
device_model="/path". Adjust the code to parse this as <emulator>.
While libxl also recognizes device_model_version="", this knob is not
required for libvirt. A runtime detection exists in libvirt to select
either "qemu-xen" or "qemu-xen-traditional".
Since qemu-xen-traditional is marked as supported just for stubdoms
there is no need to handle it.
Test data files with 'device_model' were adjusted to use
'device_model_override' instead.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Attempting to create a lxc domain with <seclabel type='none'/> fails
virsh --connect lxc:/// create distro_nosec.xml
error: Failed to create domain from distro_nosec.xml
error: unsupported configuration: Security driver model '(null)' is not available
Commit 638ffa2228 adjusted the logic for setting a driver's default
security model.
The lxc driver does not set a default security driver model in the XML
parser config, causing seclabels of type='none' to have a null model.
The lxc driver's security manager is initialized in lxcStateInitialize()
by calling lxcSecurityInit(). Use the model of this manager as the
default in the XML parser config.
For the record, this is a regression caused by commit 638ffa2228, which
changed the logic for setting a driver's default security model. The
qemu driver was adjusted accordingly, but a similar change was missed
in the lxc driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a feature is added (or removed) in a QEMU CPU model version, we
get to see the QEMU pretty name for the feature, not the name of
the macro.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The meson build system is configured to only ever build shared
libraries, so we delete the -static sub-RPMs.
The few driver conditionals are deleted as there was never any
scenario in which their value changed.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The comment that
> For instance, qemu-ga doesn't support guest time synchronization on
> Windows guests, but Linux ones.
Was correct at the time, but has since been addressed by
qemu/qemu@105fad6bb2, which added support for set-time without a time
argument, as used by `virsh domtime --sync` by libvirt-guests.sh. I can
confirm that `virsh domtime --sync` works correctly on a Windows 10
guest, as does `SYNC_TIME=1`. (Note that there can be a significant
delay between when the command completes and when the guest time
finishes synchronizing due to QEMU GA calling `w32tm` with `/nowait`,
which complicates testing.)
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
In v6.0.0-rc1~439 (and friends) we tried to cache NUMA
capabilities because we assumed they are immutable. And to some
extent they are (NUMA hotplug is not a thing, is it). However,
our capabilities contain also some runtime info that can change,
e.g. hugepages pool allocation sizes or total amount of memory
per node (host side memory hotplug might change the value).
Because of the caching we might not be reporting the correct
runtime info in 'virsh capabilities'.
The NUMA caps are used in three places:
1) 'virsh capabilities'
2) domain startup, when parsing numad reply
3) parsing domain private data XML
In cases 2) and 3) we need NUMA caps to construct list of
physical CPUs that belong to NUMA nodes from numad reply. And
while this may seem static, it's not really because of possible
CPU hotplug on physical host.
There are two possible approaches:
1) build a validation mechanism that would invalidate the
cached NUMA caps, or
2) drop the caching and construct NUMA caps from scratch on
each use.
In this commit, the latter approach is implemented, because it's
easier.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819058
Fixes: 1a1d848694
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the job has finished, but we didn't yet process the completion fake
that it's still incomplete so that apps which decided to poll
qemuDomainGetBlockJobInfo rather than use events can be sure that the
XML update was completed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace qemuMonitorGetBlockJobInfo by qemuMonitorGetAllBlockJobInfo and
hash table lookup. This basically open-codes qemuMonitorGetBlockJobInfo,
but it will be removed in next patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If starting an container fails, the virLXCProcessStop() is
called. But since vm->def->id is not set until libvirt_lxc is
spawned (the domain's ID is PID of that process),
virLXCProcessStop() returns early as virDomainObjIsActive()
returns false. But doing so leaves behind resources reserved for
the containers during the startup process. Most notably, hostdevs
are not re-attached to the host, the domain's transient XML is
not removed, etc.
To resolve this, virLXCProcessCleanup() is called in this case.
However, it is modified to accept @flags which allows caller to
run only specific cleanups (depending how far in container
creation the failure occurred). There is plenty of cleanups which
don't need this guard because either they detect a NULL pointer
or try to release an unique resource.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In recent commit of bf8bd93df0 (and friends) we switched the way
we process queried command line arguments: from string lists to
virJSONValue stored in a hash table. To achieve this
qemuMonitorJSONGetCommandLineOptions() helper was introduced
which executes the "query-command-line-options" monitor command
and then calls virJSONValueArrayForeachSteal() to process the
output. The array process function is also given
qemuMonitorJSONGetCommandLineOptionsWorker() as the callback
which is called over each item of the returned array. This
callback then steals "parameters" attribute of each array iteam
storing it in the hash table, but it leaves behind "option"
attribute (because it's g_strdup()-ed). After all of this, the
callback returns 0 which is a signal to the array processing
function that the callback took ownership of the array item. But
this is not true. While it removed "parameters" it did not take
the rest ("option" for instance). And therefore, it leads to a
memory leak:
5,347 (1,656 direct, 3,691 indirect) bytes in 69 blocks are definitely lost in loss record 2,752 of 2,794
at 0x483BEC5: calloc (vg_replace_malloc.c:760)
by 0x4E25A10: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.5)
by 0x4943317: virJSONValueNewObject (virjson.c:569)
by 0x4945692: virJSONParserHandleStartMap (virjson.c:1768)
by 0x5825A86: yajl_do_parse (in /usr/lib64/libyajl.so.2.1.0)
by 0x4945BFA: virJSONValueFromString (virjson.c:1896)
by 0xAF5C115: qemuMonitorJSONIOProcessLine (qemu_monitor_json.c:224)
by 0xAF5C45E: qemuMonitorJSONIOProcess (qemu_monitor_json.c:279)
by 0xAF4BB6C: qemuMonitorIOProcess (qemu_monitor.c:342)
by 0xAF4C444: qemuMonitorIO (qemu_monitor.c:574)
by 0x4FEF846: socket_source_dispatch (in /usr/lib64/libgio-2.0.so.0.6400.5)
by 0x4E1F727: g_main_context_dispatch (in /usr/lib64/libglib-2.0.so.0.6400.5)
The callback must return 1 so that the array item is properly
freed.
Fixes: ebeff6cd57
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the function is now only used in qemu_domain.c, move it from
domain_conf.c and rename it.
This reverts the work done in commit ace5931553
(conf, qemu: move qemuDomainNVDimmAlignSizePseries to domain_conf.c).
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainAlignMemorySizes() has an operation order problem. We are
calculating 'initialmem' without aligning the memory modules first.
Since we're aligning the dimms afterwards this can create inconsistencies
in the end result. x86 has alignment of 1-2MiB and it's not severely
impacted by it, but pSeries works with 256MiB alignment and the difference
is noticeable.
This is the case of the existing 'memory-hotplug-ppc64-nonuma' test.
The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms,
both unaligned. 'initialmem' is calculated by taking total_mem and
subtracting the dimms size (via virDomainDefGetMemoryInitial()), which
wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than
an 1GiB of 'initialmem'. Note that this value is now unaligned, and
will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem'
of 1GiB + 256MiB. Given that the dimms are aligned later on, the end
result for QEMU is that the guest will have a 'mem' size of 1310720k,
plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB
memory and currentMemory specified in the XML.
Existing guests can't be fixed without breaking ABI, but we have
code already in place to align pSeries NVDIMM modules for new guests.
Let's extend it to align all pSeries mem modules.
A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the
existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the
result for new pSeries guests. For the same unaligned XML mentioned
above, after applying this patch:
- starting QEMU mem size without PARSE_ABI_UPDATE:
-m size=1310720k,slots=16,maxmem=4194304k \ (no changes)
- starting QEMU mem size with PARSE_ABI_UPDATE:
-m size=1048576k,slots=16,maxmem=4194304k \ (size fixed)
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A previous patch removed the pSeries NVDIMM align that wasn't
being done properly. This patch reintroduces it in the right
fashion, making it reliant on VIR_DOMAIN_DEF_PARSE_ABI_UPDATE.
This makes it complying with the intended design defined by
commit c7d7ba85a6.
Since the PARSE_ABI_UPDATE is more restrictive than checking for
!migrate && !snapshot, like is being currently done with
qemuDomainAlignMemorySizes(), this means that we'll align the
pSeries NVDIMMs in two places - in post parse time for new
guests, and in qemuDomainAlignMemorySizes() for all guests
that aren't migrating or in a snapshot.
Another difference is that the logic is now in the QEMU driver
instead of domain_conf.c. This was necessary because all
considerations made about the PARSE_ABI_UPDATE flag were done
under QEMU. Given that no other driver supports ppc64 there is no
impact in this change.
A new test was added to exercise what we're doing. It consists
of a a copy of the existing 'memory-hotplug-nvdimm-ppc64' xml2xml
test, called with the PARSE_ABI_UPDATE flag. As intended, we're
not changing QEMU command line or any XML without the flag,
while the pseries NVDIMM memory is being aligned when the
flag is used.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The code to align ppc64 NVDIMMs on post parse was introduced in
commit d3f3c2c97f. That commit failed to realize that we
can't align memory unconditionally. As of commit c7d7ba85a6
("qemu: command: Align memory sizes only on fresh starts"),
all memory alignment should be executed only when we're not
migrating or in a snapshot.
This revert does not break any guests in the wild, given that
ppc64 NVDIMMs are still being aligned in qemuDomainAlignMemorySizes().
Next patch will introduce a mechanism where we can have post
parse NVDIMM alignment for pSeries without breaking the
intended design, as defined by c7d7ba85a6.
This reverts commit d3f3c2c97f.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The AppArmorSetMemoryLabel() is a callback that is called from
qemuSecuritySetMemoryLabel() which never passes NULL as @mem.
Therefore, there is no need to check whether @mem is NULL. Also,
no other driver does that and just dereference it immediately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanup the @qemuCaps argument in
qemuDomainDefValidateMemoryHotplug() is unused and thus doesn't
need to be passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Loop for multiple PATH arguments to support shell pattern expansion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases you want to fix a certain directory while you don't really
care whether there are other VMs running. Add a option to disable the
check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Linux and FreeBSD have different prefix. In the current state we've
tried to reset the labels for both systems which resulted in errors like
this:
Fixing /tmp/bitmaps2.qcow2
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
The 6 failed 'setfattrs' correspond to the wrong prefix.
Select the correct prefix based on the kernel name and modify the code
appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far our memory modules could go only into DIMM slots. But with
virtio model this assumption is no longer true - virtio-pmem goes
onto PCI bus. But for formatting PCI address onto command line we
already have a function - qemuBuildDeviceAddressStr(). Therefore,
mode DIMM address generation into it so that we don't have to
special case address building later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
There is this function qemuDomainDefValidateMemoryHotplug() which
is called explicitly from hotplug path and the qemu's domain def
validator. This is not really necessary because we can move the
part that validates feature against qemuCaps into device
validator which is called implicitly (from qemu driver's POV).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The virDomainMemoryTargetDefFormat() uses good old style of
formatting child buffer (virBufferAdjustIndent()). When switched
to virXMLFormatElement() we can save a couple of lines
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The virDomainMemorySourceDefFormat() uses good old style of
formatting child buffer (virBufferAdjustIndent()). When switched
to virXMLFormatElement() we can save a couple of lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The virDomainMemoryModel structure has a @type member which is
really type of virDomainMemoryModel but we store it as int
because the virDomainMemoryModelTypeFromString() call stores its
retval right into it. Then, to have compiler do compile time
check for us, every switch() typecasts the @type. This is
needlessly verbose because the parses already has @val - a
variable to store temporary values. Switch @type in the struct to
virDomainMemoryModel and drop all typecasts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
Our code expects that a nvdimm has a path defined always. And the
parser does check for that. Well, not fully - only when parsing
<source/> (which is an optional element). So if the element is
not in the XML then the check is not performed and the assumption
is broken. Verify in the memory def validator that a path was
set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The UUID is guest visible and thus shouldn't change if we want to
not break guest ABI.
Fixes: 08ed673901
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
On PPC platform it is required that a NVDIMM has an UUID. If none
is provided then libvirt generates one during parsing (see
v6.2.0-rc1~96 and friends). However, the example provided in our
documentation is not valid XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
This macro checks whether given number is an integer power of
two. At the same time, I've identified two places where we check
for pow2 and I'm replacing them with the macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>