IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The virsh(1) man page wasn't saying anything about the 'migrateuri'
parameter other than it can be usually omitted. A patched version of
docs/migrate.html.in is taken in this patch to fix that up in the man
page.
The man page states that with --config the next boot is affected. This
can be understood as if _only_ the next boot was affected. This isn't
true if the machine is running.
This patch adds the full --live, --config, --current infrastructure and
tweaks stuff to correctly support the obsolete --persistent flag.
Note that this patch changes the the behavior of the --config flag to match the
use of this flag in rest of libvirt. This flag was mistakenly renamed from
--persistent that originaly had different semantics.
The domif-getlink command did not terminate successfully when the
interface state was found. As the code used old and too complex approach
to do the job, this patch refactors it and fixes the bug.
The 'virsh vcpupin' and 'virsh emulatorpin' commands use the same
code to parse the cpulist. This patch abstracts the same code as
a helper. Along with various code style fixes, and error improvement
(only error "Physical CPU %d doesn't exist" if the specified CPU
exceed the range, no "cpulist: Invalid format", see the following
for an example of the error prior to this patch).
% virsh vcpupin 4 0 0-8
error: Physical CPU 4 doesn't exist.
error: cpulist: Invalid format.
Since the refactoring in fbe2d49 we call virSecretFree even if
virSecretDefineXML fails, which leads to overwriting the error
message with:
error: Invalid secret: virSecretFree
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=929045
Right now, libvirt-guests gives awkward output. It's possible to
force faster failure by setting /etc/sysconfig/libvirt-guests to use:
ON_SHUTDOWN=shutdown
PARALLEL_SHUTDOWN=0
SHUTDOWN_TIMEOUT=1
ON_BOOT=ignore
at which point, we see:
$ service libvirt-guests restart
Running guests on default URI: a, b, d, c
Shutting down guests on default URI...
Starting shutdown on guest: a
Shutdown of guest a failed to complete in time.Starting shutdown on guest: b
Shutdown of guest b failed to complete in time.Starting shutdown on guest: d
Shutdown of guest d failed to complete in time.Starting shutdown on guest: c
Shutdown of guest c failed to complete in time.libvirt-guests is configured not to start any guests on boot
* tools/libvirt-guests.sh.in (shutdown_guest): Add missing newline.
Reported by Xuesong Zhang.
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
The docs assumed the command works always for QEMU and other
hypervisors. As this is done using the balloon mechainism live increase
of the maximum memory limit isn't supported. Fix the docs to mention
this limitation.
Don't print the pool option name if it's null.
Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol
After:
virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=924571
This patch adds three macros to the virsh source tree that help to
easily check for mutually exclusive parameters.
VSH_EXCLUSIVE_OPTIONS_EXPR has four arguments, two expressions to check
and two names of the parameters to print in the message.
VSH_EXCLUSIVE_OPTIONS is more specific and check the command structure
for the parameters using vshCommandOptBool.
VSH_EXCLUSIVE_OPTIONS_VAR is meant to check boolean variables with the
same name as the parameters.
Clarify that net-create deals with a transient virtual
network whereas net-define defines a persistent virtual
network definition and will create the network (xml)
definition file.
Clarify that net-destroy works with both transient and
persistent virtual networks.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
According to the man page, the memspec parameter should have the
'--memspec' option mandatory and this is as close as we can get to
that. What this change does is explained below.
man virsh:
snapshot-create-as ... [[--live] [--memspec memspec]]
virsh help snapshot-create-as before this patch:
SYNOPSIS
snapshot-create-as ... [<memspec>] ...
...
OPTIONS
[--memspec] <string> ...
virsh help snapshot-create-as after this patch:
SYNOPSIS
snapshot-create-as ... [--memspec <string>] ...
...
OPTIONS
--memspec <string> ...
Add a new virDomainLxcEnterSecurityLabel() function as a
counterpart to virDomainLxcEnterNamespaces(), which can
change the current calling process to have a new security
context. This call runs client side, not in libvirtd
so we can't use the security driver infrastructure.
When entering a namespace, the process spawned from virsh
will default to running with the security label of virsh.
The actual desired behaviour is to run with the security
label of the container most of the time. So this changes
virsh lxc-enter-namespace command to invoke the
virDomainLxcEnterSecurityLabel method.
The current behaviour is:
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient
staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps
Note the ps command is running as unconfined_t, After this patch,
The new behaviour is this:
virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps
The '--noseclabel' flag can be used to skip security labelling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Properly check the return value of vshCommandOptStringReq for xmlfile:
* error out on incorrect input (--xmlfile '')
* use default XML <domainsnapshot/> with no --xmlfile specified
(Broken by commit b2e8585)
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=919826
RHEL4 vintage libxml2 header files are missing xmlSaveToBuffer
despite the symbol existing in the binary
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Only nodedev-destroy and nodedev-dumpxml can benifit from the
new API, other commands like nodedev-detach only works for
PCI devices, WWN makes no sense for them.
This patch switches string option retrieval to vshCommandOptStringReq
and refactors some error paths to avoid an unlikely memory leak of a
secret object in cmdSecretSetValue.
also avoids potential NULL pointer dereference:
$ virsh snapshot-current asdf ""
error: invalid snapshotname argument '(null)'
by removing the error message in favor of vshCommandOptStringReq
This patch adds some empty lines to separate blocks of code, cleans up
unnecessary error message constructs in cmdNodeDeviceDetach,
cmdNodeDeviceReAttach, cmdNodeDeviceReset and refactors error paths in
cmdNodeDeviceDumpXML.
This patch adds a helper function with similar semantics to
vshCommandOptString that requests a string argument, but does some error
reporting without the need to do it in the functions themselves.
The error reporting also provides information about the parameter whose
retrieval failed.
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors. In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).
It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:
https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html
This patch does that and fixes a few more instances not found by Coverity
that failed the check.
When a disk-only snapshot is requested the domain is treated as if it
was offline. This forbids to mix memory checkpoints with the DISK_ONLY
flag.
This patch improves the error message and mentions the restriction in
the virsh man page.
Linefeed is missed in the help of node-memory-tune.
This patch just adds '\n' to get a correct help message.
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
This patch fixes the following issues in the cpu-stats virsh command:
1) Renames label failed_params to no_memory to match coding style
2) Uses proper typed parameter cleanup in error paths to avoid leaks
3) Adds a ret variable and simplifies error labels
4) Changes error message to a slightly more descriptive one and gets rid
of the newline at the end:
Before:
$ virsh cpu-stats tr
error: Failed to virDomainGetCPUStats()
error: Requested operation is not valid: domain is not running
After:
$ tools/virsh cpu-stats tr
error: Failed to retrieve CPU statistics for domain 'tr'
error: Requested operation is not valid: domain is not running
Add a 'lxc-enter-namespace' command which accepts a domain name
and then a command + args to run, attached to the container
eg
virsh -c lxc:/// lxc-enter-namespace demo -- /bin/ps -auxf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch changes whitespace and the length of the separation line from
this format:
$ virsh net-list --all
Name State Autostart Persistent
--------------------------------------------------
default inactive yes yes
to
$ virsh net-list --all
Name State Autostart Persistent
----------------------------------------------------------
default inactive yes yes
to match the output of virsh list.
The QEMU specific APIs all operate on domains, not the host,
so should be in the virsh-domain.c file / group
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
For non-default connections (specified by the environment variable or
the command line option) we call virConnectOpenAuth without registering
the vshCatchDisconnect callback.
This calls vshReconnect instead which takes care of it.
Since we (ab)use vshReconnect for the default URI connection, if it
fails it might print 'Failed to reconnect to the hypervisor' even if we
were never connected before.
This changes it to only mention reconnection on the first try after
getting disconnected.
Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d
Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
The termios struct exported by the termios.h header is used as an
argument for vshMakeStdinRaw(). The header isn't used anywhere in
tools/virsh-domain.c.
This patch adds the header to the header declaring vshMakeStdinRaw() and
removes other places in virsh.
Libvirt's helper API's when called directly don't raise the error so
that virsh remembers it. Subsequent calls to libvirt API's might reset
the error.
In case of schedinfo virDomainFree() in the cleanup section resets the
error when virTypedParameterAssignFromStr() fails.
This patch adds function vshSaveLibvirtError() that can be called after
calling libvirt helper APIs to ensure the error is remembered.
virStringSplit requires a non-NULL input, but commit cef78ed forgot
to follow the rule.
* tools/virsh-domain.c (cmdReboot, cmdShutdown): Avoid NULL deref.
The virNodeSuspend API allows for a duration of 0, to mean no
timed wakup. virsh needlessly forbids this though
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On error, virStoragePoolGetAutostart would return -1 leaving autostart
untouched.
Removed the misleading debug message as well.
Error: CHECKED_RETURN (CWE-252):
libvirt-0.10.2/tools/virsh-pool.c:1386: unchecked_value: No check of the
return value of "virStoragePoolGetAutostart(pool, &autostart)".
Found by coverity:
Error: SIZEOF_MISMATCH (CWE-569):
libvirt-0.10.2/tools/virsh-domain.c:4754: suspicious_sizeof: Passing
argument "8UL /* sizeof (cpumap) */" to function
"_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
then casting the return value to "unsigned char *" is suspicious.
Error: SIZEOF_MISMATCH (CWE-569):
libvirt-0.10.2/tools/virsh-domain.c:4942: suspicious_sizeof: Passing
argument "8UL /* sizeof (cpumap) */" to function
"_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
then casting the return value to "unsigned char *" is suspicious.
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable. This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.
Now that we can filter on this information, we should also make
it easy to get at.
* tools/virsh-snapshot.c (cmdSnapshotInfo): Add another output
row, and switch to XPath queries rather than strstr.
Snapshot filtering based on types is useful enough to add
back-compat support into virsh. It is also rather easy - all
versions of libvirt that don't understand the new filter flags
already gave us sufficient information in a single XML field
to reconstruct all the information we need (that is, it isn't
until libvirt 1.0.1 that we have more interesting types of
snapshots, such as offline external).
* tools/virsh-snapshot.c (vshSnapshotFilter): New function.
(vshSnapshotListCollect): Add fallback support.
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties. This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
This reverts commits 5f63a5cb42
and ff86b0c97b. After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion. Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.
Modified the places where virNodeGetInfo was used for the purpose
of obtaining the maximum node CPU number. Transparently falling
back to virNodeGetInfo in case of failure.
Wrote utility function vshNodeGetCPUCount to compute node CPU
number.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name. This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external. For an example,
virsh snapshot-create-as $dom --memspec /path/to/file
is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.
* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
So far, none of the existing callers of vshStringToArray expected
the user to ever pass a literal comma; meanwhile, snapshot parsing
had rolled its own array parser. Moving the comma escaping into
the common function won't affect any existing callers, and will make
this function reusable for adding memory handling to snapshot parsing.
As a bonus, the testsuite was already testing snapshot parsing, so
the fact that the test still passes means that we are now giving
testsuite exposure to vshStringToArray.
* tools/virsh-snapshot.c (vshParseSnapshotDiskspec): Move ,,
parsing...
* tools/virsh.c (vshStringToArray): ...into common function.
Also, vshStrdup can't fail.
Make it clear that the alternate terms have no difference except
for length of time they were supported.
* tools/virsh.pod (start, shutdown, reboot): More documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.
Also, touch up the wording of 'reboot' to be more accurate.
* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.
This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
*include/libvirt/libvirt.h.in:
- add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
- add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh-domain-monitor.c:
- add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
*tools/virsh-snapshot.c:
- add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh.pod:
- add docs for --live option added to use
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871756
Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.
For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program. We should prefer mkostemp[s] in the first place.
* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273
* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
We always expose individual bits from flags as separate options rather
than exposing a raw flags options. Since virNodeSuspendForDuration does
not currently support any flags, the only way of using this --flags
options that would not fail is "--flags 0", which is equivalent to
omitting the option. Thus it is highly unlikely anyone would actually be
using it and removing it should be safe.
https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors. Clean up a
misleading error message, and add some documentation.
* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.
This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
I was using qemu-monitor-command during development, and found it quite
hard to use. Compare the results of this patch on ease of reading:
$ virsh qemu-monitor-command dom '{"execute":"query-version"}'
{"return":{"qemu":{"micro":1,"minor":12,"major":0},"package":"(qemu-kvm-0.12.1.2)"},"id":"libvirt-7683"}
$ virsh qemu-monitor-command --pretty dom '{"execute":"query-version"}'
{
"return": {
"qemu": {
"micro": 1,
"minor": 12,
"major": 0
},
"package": "(qemu-kvm-0.12.1.2)"
},
"id": "libvirt-7674"
}
* tools/virsh-host.c (cmdQemuMonitorCommand): New option.
* tools/virsh.pod (qemu-monitor-command): Document it.
This command uses the new virNetworkUpdate() API to modify an existing
network definition, and optionally have those modifications take
effect immediately without restarting the network.
An example usage:
virsh net-update mynet add-last ip-dhcp-host \
"<host mac='00:11:22:33:44:55' ip='192.168.122.45'/>" \
--live --config
If you like, you can instead put the xml into a file, and call like
this:
virsh net-update mynet add ip-dhcp-host /tmp/myxml.xml
--live --config
virsh will autodetect whether the argument is itself an xml element,
or if it's a file, by looking at the first character - the first
character of an xml element is always "<", and the first character of
a file is almost always *not* "<" (in the rare case that it is, the
user could specify "./<filename...").
A --parent-index option is also available (to give the index within a
list of parent objects, e.g. the index of the parent <ip> element when
updating ip-dhcp-host elements), but is optional and at least for now
will probably be used rarely.
--live, --config, and --current options - if you specify --live, only
the live state of the network will be updated. If you also specify
--config, then the persistent configuration will also be updated;
these two commands can be given separately, or both together. If you
don't specify either (you can optionally specify "--current" for the
same effect), then the "current" config will be updated (i.e. if the
network is active, then only its live config is affected, but if the
network is inactive, only the persistent config is affected).
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk. Further arguments can fine-tune which portion of the
chain is committed. Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.
With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.
The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.
* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).
Example of node-memory-tune's output:
Shared memory:
pages_to_scan 100
sleep_millisecs 20
pages_shared 0
pages_sharing 0
pages_unshared 0
pages_volatile 0
full_scans 0
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.
* tools/virsh-secret.c: (New helper vshSecretSorter,
vshSecretListFree, and vshCollectSecretList; Use the new
API for secret-list; error out if flags are specified,
because there is no way to filter the results when using
old APIs (no APIs to get the properties (ephemeral, private)
of a secret yet).
* tools/virsh.pod: Document the 4 new options.
tools/virsh-nwfilter.c:
* vshNWFilterSorter to sort network filters by name
* vshNWFilterListFree to free the network filter objects list.
* vshNWFilterListCollect to collect the network filter objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-nodedev.c:
* vshNodeDeviceSorter to sort node devices by name
* vshNodeDeviceListFree to free the node device objects list.
* vshNodeDeviceListCollect to collect the node device objects, trying
to use new API first, fall back to older APIs if it's not supported.
* Change option --cap to accept multiple capability types.
tools/virsh.pod
* Update document for --cap
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
tools/virsh-interface.c:
* vshInterfaceSorter to sort interfaces by name
* vshInterfaceListFree to free the interface objects list.
* vshInterfaceListCollect to collect the interface objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-network.c:
* vshNetworkSorter to sort networks by name
* vshNetworkListFree to free the network objects list.
* vshNetworkListCollect to collect the network objects, trying
to use new API first, fall back to older APIs if it's not supported.
* New options --persistent, --transient, --autostart, --no-autostart,
for net-list, and new field 'Persistent' for its output.
tools/virsh.pod:
* Add documents for the new options.
tools/virsh-volume.c:
* vshStorageVolSorter to sort storage vols by name
* vshStorageVolumeListFree to free the volume objects list
* vshStorageVolumeListCollect to collect the volume objects, trying
to use new API first, fall back to older APIs if it's not supported.
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
out of range
This patch changes the update procedure so that only the changed value
is updated on the host.
This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
A last minute rename in commit fc122e1a to virsh.h was not properly
reflected when rebasing virsh-pool.c in commit 93a346d.
* tools/virsh-pool.c (vshStoragePoolListCollect): Use VSH_MATCH,
not MATCH.
tools/virsh-pool.c:
* vshStoragePoolSorter to sort the pool list by pool name.
* struct vshStoragePoolList to present the pool list, pool info
is collected by list->poolinfo if 'details' is specified by
user.
* vshStoragePoolListFree to free the pool list
* vshStoragePoolListCollect to collect the pool list, new API
virStorageListAllPools is tried first, if it's not supported,
fall back to older APIs.
* New options --persistent, --transient, --autostart, --no-autostart
and --type for pool-list. --persistent or --transient is to filter
the returned pool list by whether the pool is persistent or not.
--autostart or --no-autostart is to filter the returned pool list
by whether the pool is autostarting or not. --type is to filter
the pools by pool types. E.g.
% virsh pool-list --all --persistent --type dir,disk
tools/virsh.pod:
* Add documentations for the new options.
Move definition of MATCH from virsh-domain-monitor.c into
virsh.h, and rename it as VSH_MATCH for further use.
* tools/virsh-domain-monitor.c: Change MATCH into VSH_MATCH
* tools/virsh.h: Define VSH_MATCH
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded. Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]
Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t. But now, it requires only that
tv_sec be big enough to hold a time_t.
This patch was needed for Emacs. Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.
Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc. That'd be
more work, though. And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.
I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me. But if someone wants to take the
more-ambitious approach that'd be fine, I expect.
For this particular case, though, how about if we avoid
the problem entirely? libvirt doesn't need to use struct
timeval here at all. It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
Almost each virsh command uses the function vshConnectionUsability
before doing anything, to check if the connection is "alive". Commands
that don't need an conection are already conveniently marked with
VSH_CMD_FLAG_NOCONNECT. We can automaticaly check for the connection
before calling any remote command so we don't forget to do so.
This patch also upgrades the connection check to use virConnectIsAlive
along with the current approach.
When executing virsh -t <command> the reported timing was off
by 3 orders of magnitude if the command took more than one
second.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Although virsh command raises a correct error information, the command status
returns 0(true), this patch is used for fixing this issue.
Signed-off-by: Alex Jia <ajia@redhat.com>
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Since the move to systemd libvirt-guests doesn't output this progress
information anymore. This patch brings back this feature.
It is helpful to show the admin what the system is waiting for and what
is left of the timeout (e.g. for calibrating the shutdown timing of a ups).
Rewriting the current line with \r doesn't work anymore in the context
of systemd. So always write new lines, but move to 5 second intervals
to avoid flooding the console.
Last of the file splits.
* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
Almost done with the splits.
* tools/virsh-snapshot.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-snapshot.c: Likewise.
One of the simpler splits.
* tools/virsh-secret.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-secret.c: Likewise.
More in a series of file splits.
* tools/virsh-pool.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-pool.c: Likewise.
(virCommandOptPoolBy): Fix flag usage.
Yet another split file.
* tools/virsh-nwfilter.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-nwfilter.c: Likewise.
Another worthwhile split, needed one more public function.
* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.
Another relatively easy file split.
* tools/virsh-network.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-network.c: Likewise.
(vshCommandOptNetworkBy): Update signature.
Another relatively easy split, since helper functions were fixed
in the previous patch.
* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
The splits are getting easier, with fewer cleanups needed in virsh.h.
* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.
Another file worth compiling on its own instead of by .c inclusion.
* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
C99 says that __foo naming is reserved for the compiler. Besides,
we had several different styles in use; this consolidates things
to set up the typedefs up front then declare the types with
consistent naming.
* tools/virsh.h: Use consistent struct naming.
* tools/virsh.c (_vshCommandParser): Likewise.
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions. The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.
* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user. Use header.
Having one .c file include another does not give any compilation
benefits; move towards modular .o files by first splitting out
reused declarations into a new virsh.h. This patch doesn't try
very hard to see which functions are used or not, to make it
easier to review the file split. Future patches can further trim
the header to be smaller.
* tools/Makefile.am (virsh_SOURCES): List new file, and prepare
for others.
* tools/virsh.c: Split declarations...
* tools/virsh.h: ...into new file, and make several functions
non-static.
* tools/virsh-domain-monitor.c (vshGetDomainDescription): Make
non-static.
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.
* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
* tools/virsh.c: New macro vshStrcasecmp
* tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of
strcasecmp
* tools/virsh-snapshot.c: Likewise
* cfg.mk: Only avoid doing strcase checking for virsh.c
