IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Apart from some churn, the important is the removal of 'netcf-devel'
from the fedora rawhide container.
Update to state as of 174fe4999204afcae (libvirt-ci).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Both of the current mingw jobs are marked as 'allow_failure' because
they are running against Fedora rawhide which is an unstable distro.
We need at least one mingw job to be gating to more reliably detect
problems.
This introduces dockerfiles for both mingw variants on Fedora 35
and sets the mingw64 build to run on Fedora 34, and mingw32 on
Fedora rawhide.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- The Cirrus CI variables are now sorted
- The dockerfiles update commands changed for some distros
- Meson in CentOS is now new enough to use
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the libnetcf-dev package from Debian Sid, as it is no
longer available in that distro stream.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The non-released distros have reasonably frequent package installation
failures that can last for days at a time. This makes them unsuitable
for use as gating CI jobs.
This ensures all of the jobs in Debian Sid, Fedora Rawhide, openSUSE
Tumbleweed and FreeBSD Current are marked "allow-failure: true".
This means the jobs still run, but any failure will not be considered
fatal to the pipeline.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The layering of the cross containers is fixed to move arch specific
ccache setup out of the common base layer.
A missing Cirrus CI variable substitution is added, though this is
irrelevant given libvirt's package list.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The armv7l and ppc64le cross-builds as well as the Clang build
are adopted from Debian 10, while the mips64el build is adopted
from Debian sid. As always, the way jobs are distributed across
Debian versions is fairly arbitrary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The value 3 is the length of the "ci-" prefix, which is present
in the items returned by get_registry_images() but not in those
returned by get_dockerfiles().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These were removed along with the outdated information on how
to regenerate the Dockerfiles contained in the repository, but
this part is still relevant.
Reverts: 30856d2865 (partially)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We now use lcitool's manifest feature to generate files. The logic
for checking for stale containers in the registry, however, is still
relevant so that is propagated to a standalone command.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We now use lcitool's manifest feature to generate files.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This uses the command "lcitool manifest ci/manifest.yml" to re-generate
all existing dockerfiles and gitlab CI config.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
lcitool now uses the term "target" instead of "host" to refer to
the various operating systems it supports, and we need to adapt
our helper script so that it works with the new command line
interface.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
All the python packages got renamed from py37- to py38-
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The base OS image might include outdated contents, and we don't
want to get spurious failures caused by bugs that have already been
fixed in the respective packages.
This is particularly important on macOS, because 'brew install foo'
will fail if 'foo' is already installed but outdated: upgrading all
packages first ensures we never run into this scenario.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In the distros using RPMs, we build libvirt once as a side effect
of running "ninja dist", and once via rpmbuild.
In addition "ninja dist" will run all tests including the "syntax-check"
suite, despite use having a separate "codestyle" job for for that.
There is no way to pass "--no-suite" when creating the dist, but if we
switch to invoking "meson dist", we can skip the build+test part
entirely using "--no-tests".
When doing this we then run explicit "meson compile" and "meson test"
commands for the distros that don't build the RPMs, and in the latter
case we can now skip the "syntax-check" suite.
The RPM builds already skipped the "syntax-check" suite.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "dist" and "test" targets in ninja end up calling back into
the equivalent meson commands. The meson commands support various
arguments that are not accessible when invoked via ninja, so it
is preferrable to use meson directly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When CI jobs fail on the test suite, we don't see much helpful
information by default:
stderr:
TEST: bhyvexml2argvtest
......!!.............!......!........... 40
........................!...... 71 FAIL
Some tests failed. Run them using:
VIR_TEST_DEBUG=1 VIR_TEST_RANGE=7-8,22,29,65
/tmp/cirrus-ci-build/build/meson-private/dist-build/tests/bhyvexml2argvtest
Following the instructions to re-run the test with VIR_TEST_DEBUG=1 is
quite unfriendly when we could have had that set for CI already.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Notable changes:
* the CentOS Stream 8 container is now using a proper base
image instead of starting from a CentOS 8 image and then
adding the CentOS Stream 8 repositories on top;
* distributions that have a perl-base package are now using
that one instead of the regular perl package, which
contains a bunch of features we don't need, resulting in
smaller containers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The names have been recently changed in libvirt-ci to be more
accurate, so we should follow along.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Notable changes:
* cross-building container images are smaller because they
no longer include the native compilers;
* ccache is enabled for clang builds.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Unless you create such an commit, cirrus-ci.com will not pick up the
github project and cirrus-run will fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Notable changes:
* HAL is no longer installed on FreeBSD;
* the native version of libwsman is no longer installed in
containers intended for cross-compilation;
* Meson 0.55 rather than 0.54 is requested when installing
it from PyPI;
* GNU sed and GNU grep are installed explicitly everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
FreeBSD 12 was released in December 2018, so according to our
platform support policy we can now drop support for the previous
major release. It would be going EOL in September anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since the string "ci" is already contained in the path, it
seems unnecessary to include it into the filename too: in fact,
we only do that for Dockerfiles and not for files in ci/cirrus,
even though those are generated the very same way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As documented at [1], the common practice with respect to private
attributes/methods naming is to prefix them with an underscore.
[1] https://docs.python.org/3/tutorial/classes.html#private-variables
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This function checks whether there are any stale Docker images in the
registry that can be purged. Since we're pulling available container
images from our GitLab registry with the 'list-images' action, it
could happen that we'd list old (already unsupported) images and make
them available for the user to consume and run a build in them.
Naturally, the build will most likely fail leaving the user confused.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The corresponding Bash script is dropped.
After this patch's rewrite, the Makefile's original image listing
target remains intact only to notify the user to use the Python helper
instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With the gradual rewrite of the Makefile to the 'helper' script will
require helper functions that would better live in a separate util
module.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Offer an option to silence all output to stdout coming out of the
dockerfiles/varsfiles generating code.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This help formatter class reports the defaults we use for options
taking an argument.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We now wrap all its important functionality with the much more
user-friendly ci/helper script, and the long term plan is for
the Makefile to disappear completely.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The functionality is now available in the ci/helper script.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target, but allows
additional arguments to be specified in a more convenient and
discoverable way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target, but allows
additional arguments to be specified in a more convenient and
discoverable way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target, but allows
additional arguments to be specified in a more convenient and
discoverable way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This provides the same functionality as the two refresh scripts
that are currently in the repository, with the following
advantages:
* all files are refreshed with a single command;
* if lcitool is present in the user's $PATH, it will be
discovered and used automatically;
* some output is produced, so the user can follow along with
the progress of the operation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
