IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's not portable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We currently rely on it being enabled by default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The %meson* macros pass --auto-features=enabled to enable all "auto"
features, which means we have to explicitly disable them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All supported versions of Fedora and RHEL >= 9.0 support
/dev/userfaultfd.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
rhel-8 lacks 'pidfd_open()' support and thus nbdkit can't be enabled
there.
mingw builds explicitly disable nbdkit support, but use
'--auto-features=enabled' thus omitting setting of
'nbdkit_config_default' results in meson thinking we want to enable it:
../meson.build:1018:2: ERROR: Problem encountered: nbdkit_config_default requires nbdkit to be enabled
Disable it explicitly. The meson logic might need to be fixed eventually
when switching it on by default.
Fixes: 9eabf14afb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently when we build with nbdkit support, libvirt will always try to
use nbdkit to access remote disk sources when it is available. But
without an up-to-date selinux policy allowing this, it will fail.
because the required selinux policies are not yet widely available, we
have disabled nbdkit support on rpm builds for all distributions before
Fedora 40.
Unfortunately, this makes it more difficult to test nbdkit support.
After someone updates to the necessary selinux policies, they would also
need to rebuild libvirt to enable nbdkit support. By introducing a
configure option (nbdkit_config_default), we can build packages with
nbdkit support but have it disabled by default.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We currently have a BuildDepends on it, which doesn't help
ensuring that the tool is available at runtime, when the storage
driver might need to spawn it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
They've been there since the start, but we don't seem to be using
them for anything. The native part doesn't have BuildRequires on
the native equivalents.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We no longer use it, so commit a62486b95f correctly dropped
the Build-Requires; shortly afterwards, however, I accidentally
reintroduced it by mistake.
Fixes: 3df8cc658e
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new _without_native knob makes it possible to skip the native
build completely and build for MinGW only.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These replace the existing with_mingw but offer additional
granularity.
The existing _without_mingw knob retains its behavior of
disabling all MinGW builds at once for convenience, while the
newly introduced _without_mingw32/_without_mingw64 knobs make
it possible to disable only one of them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is functionally equivalent and will make future patches
nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Move all dependencies that are needed both for native builds and
for MinGW ones near the top of the list. This will make future
patches nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's already been dragged in by the -devel package, but since
we use the command line tool directly as part of our build
process it's more correct to explicitly depend on the runtime
package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The old package name is only kept around for compatibility
reasons.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We want it both for native builds and MinGW ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tests are disabled so this combination never made any sense,
but with recent changes it has turned into a build failure.
Fixes: 8ce0decc37
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This replaces use of 'rpcgen' with our new python impl of
the RPC code generator. Since the new impl generates code
that matches our style/coding rules, and does not contain
long standing bugs, we no longer need to post-process the
output.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds a lexer capable of handling the XDR protocol files.
The lexical rquirements are detailed in
https://www.rfc-editor.org/rfc/rfc4506#section-6.2
pytest is introduced as a build dependancy for testing python
code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
commit v9.8.0-40-g7cbd8c4230 changed the name of the option that
enables/disables nbdkit support in the build from "libnbd" to
"nbdkit", but one use of "libnbd=disabled" was missed in
libvirt.specfile.in - the meson commandline for mingw.
This patch changes that line to "-Dnbdkit=disabled", thus unbreaking
the rpm build.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/550
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently, nbdkit support will automatically be enabled as long as
the pidfd_open(2) syscall is available. Optionally, libnbd is used
to generate more user-friendly error messages.
In theory this is all good, since use of nbdkit is supposed to be
transparent to the user. In practice, however, there is a problem:
if support for it is enabled at build time and the necessary
runtime components are installed, nbdkit will always be preferred,
with no way for the user to opt out.
This will arguably be fine in the long run, but right now none of
the platforms that we target ships with a SELinux policy that
allows libvirt to launch nbdkit, and the AppArmor policy that we
maintain ourselves hasn't been updated either.
So, in practice, as of today having nbdkit installed on the host
makes network disks completely unusable unless you're willing to
compromise the overall security of the system by disabling
SELinux/AppArmor.
In order to make the transition smoother, provide a convenient
way for users and distro packagers to disable nbdkit support at
compile time until SELinux and AppArmor are ready.
In the process, detection is completely overhauled. libnbd is
made mandatory when nbdkit support is enabled, since availability
across operating systems is comparable and offering users the
option to make error messages worse doesn't make a lot of sense;
we also make sure that an explicit request from the user to
enable/disable nbdkit support is either complied with, or results
in a build failure when that's not possible. Last but not least,
we avoid linking against libnbd when nbdkit support is disabled.
At the RPM level, we disable the feature when building against
anything older than Fedora 40, which still doesn't have the
necessary SELinux bits but will hopefully gain them by the time
it's released. We also allow nbdkit support to be disabled at
build time the same way as other optional features, that is, by
passing "--define '_without_nbdkit 1'" to rpmbuild. Finally, if
nbdkit support has been disabled, installing libvirt will no
longer drag it in as a (weak) dependency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Require libnbd-devel when building the qemu driver, recommend nbdkit
packages.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The libvirt package is a sort of catch-all that brings in all
daemon drivers as well as the client package, so it makes sense
for it do drag in the QEMU-specific clients as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A default deployment on modern distros uses modular daemons but
switching back to the monolithic daemon, while not recommended,
is still considered a perfectly valid option.
For a monolithic daemon deployment, the upgrade to libvirt 9.2.0
or newer works as expected; a subsequent call to dnf autoremove,
however, results in the libvirt-daemon package being removed and
the deployment no longer working.
In order to avoid that situation, mark the libvirt-daemon as
recommended.
This will unfortunately result in it being included in most
installations despite not being necessary, but considering that
the alternative is breaking existing setups on upgrade it feels
like a reasonable tradeoff.
Moreover, since the dependency on libvirt-daemon is just a weak
one, it's still possible for people looking to minimize the
footprint of their installation to manually remove the package
after installation, mitigating the drawbacks of this approach.
https://bugzilla.redhat.com/show_bug.cgi?id=2232805
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The name of the virtsecretd daemon was misspelled, resulting
in multiple errors during installation:
Running scriptlet: libvirt-daemon-driver-secret-9.5.0-6.el9.x86_64
Failed to preset unit: Unit file virsecretd.socket does not exist.
Failed to preset unit: Unit file virsecretd-ro.socket does not exist.
Failed to preset unit: Unit file virsecretd-admin.socket does not exist.
Failed to preset unit: Unit file virsecretd.service does not exist.
Spell the name correctly.
https://bugzilla.redhat.com/show_bug.cgi?id=2236057
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In most cases the replacement is straightforward, with the
biggest difference being that we now schedule restarts during
%pre instead of %post. This also means that we can get rid of
%post for most packages, reducing the number of scriptlets that
need to run during install/upgrade.
Notable exceptions are libvirt-guests.service, where we stop
using the standard systemd macros to adopt our custom ones, as
well as the virtlogd and virtlockd services, where the reload
operation is moved from %postun to %posttrans.
https://bugzilla.redhat.com/show_bug.cgi?id=2210058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
systemd provides a number of standard RPM macros but they don't
quite satisfy our requirements, as evidenced by the fact that we
have already built some custom tooling around them.
Scenarios that the standard macros don't cover and that we're
already addressing with our custom ones:
* for some services (libvirtd, virtnetworkd, virtnwfilterd)
there are multiple conditions that might lead to a restart,
and we want to make sure that they're not needlessly
restarted several times per transaction;
* some services (virtlogd, virtlockd) must not be restarted
during upgrade, so we have to reload them instead.
Issues that neither the standard macros nor our custom ones
address:
* presets for units should be applied when the unit is first
installed, not when the package that contains it is.
The package split that happened in 9.1.0 highlighted why this
last point is so important: when virtproxyd and its sockets
were moved from libvirt-daemon to the new libvirt-daemon-proxy
package, upgrades from 9.0.0 caused presets for them to be
applied.
On a platform such as Fedora, where modular daemons are the
default, this has resulted in breaking existing deployments in
at least two scenarios.
The first one is machines that were configured to use the
monolithic daemon, either because the local admin had manually
changed the configuration or because the installation dated
back to before modular daemons had become the default. In this
case, virtproxyd.socket being enabled resulted in a silent
conflict with libvirtd.socket, which by design shares the same
path, and thus a completely broken setup.
The second one is machines where virtproxy-tls.socket, which is
disabled by default, had manually been enabled: in this case,
applying the presets resulted in it being disabled and thus a
loss of remote availability.
Note that these are just two concrete scenarios, but the problem
is more generic. For example, if we were to add more units to an
existing package, per the current approach they wouldn't have
their presets applied.
The new macros are designed to avoid all of the pitfalls
mentioned above. As a bonus, they're also simpler to use: where
the current approach requires restarts and other operations to
be handled separately, the new one integrates the two so that,
for each scriptlet, a single macro call is needed.
https://bugzilla.redhat.com/show_bug.cgi?id=2210058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This logic was necessary when socket activation was introduced
in libvirt 5.6.0/5.7.0 in order to guarantee smooth upgrades.
These days, even the oldest platform that we target ships a
version of libvirtd that implements socket activation, so the
additional code is no longer useful and we can treat libvirtd
the same as all other services.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The current implementation pretty much assumes that targets
where modular daemons are the default will stick with that
configuration, as will targets where they're not, or that
changes to these defaults will be performed by the admin after
the packages have been installed.
This is unnecessarily limiting: for example, on a target that
defaults to using the monolithic daemon, it's entirely possible
to create a local preset such as
# /etc/systemd/system-preset/00-virt.preset
disable libvirtd.service
disable libvirtd*.socket
enable virtqemud.service
to opt into a modular daemon deployment. The opposite is of
course also true. We shouldn't get in the way of these
reasonable use cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To make things more readable, use the same order (%pre, %post,
%posttrans, %preun, %postun) everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to our platform support policy, now that Fedora 38 is
out we no longer target Fedora 36 and older. This allows us to
simplify a few conditionals.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's not used as part of the build process or searched for at
build time, and the QEMU driver detects its path at runtime,
so one could think that the BuildRequires is unnecessary. But
we actually need it to be present at build time in order to
run the full test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The default would already work fine for Fedora and RHEL, but
it's better to be explicit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that we have SELinux support for passt, we want things to
work out of the box and that requires having the passt-specific
SELinux bits installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The RPM automatic deps generator for python does not pick these up
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the libvirt-daemon dependency from the various
libvirt-daemon-<hypervisor> subpackages, replacing it with a set of the
new sub subpackages providing similar functionality. When libvirt is build
with modular daemons, the hypervisor subpackages no longer include the
traditional, monolithic libvirt daemon.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To avoid needlessly installing the monolithic daemon, replace the
libvirt-daemon dependency with libvirt-daemon-common in the primary
drivers.
The qemu driver also needs a dependency on libvirt-daemon-log since
the virtqemud systemd service file has a hard dependency on
virtlogd.socket.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To avoid needlessly installing the monolithic daemon, replace the
libvirt-daemon dependency with libvirt-daemon-common in the secondary
drivers. The common subpackage contains all the utilities and files
needed by the secondary drivers.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Both drivers use numad via virNumaGetAutoPlacementAdvice. Drop the numad
dependency from libvirt-daemon-common to avoid enforcing it all users of
the subpackage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only the nodedev and lxc drivers require module-init-tools. Remove the
dependency from libvirt-daemon-common and add it to the nodedev and lxc
drivers. This avoids enforcing the dependency on all users of
libvirt-daemon-common.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
