IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Allow users to easily resize 'raw' images on block devices to the full
capacity of the block device. Obviously this won't work on file-backed
storage (filling the remaining capacity is most likely wrong) or for
formats with metadata due to the overhead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Removing a backing image could break other image chains as it's
theoretically possible to share backing chains.
As --storage/--remove-all-storage is fully implemented in virsh as a
helper option, which enumerates and deletes VM's volumes. We do not plan
to make it any more complicated.
Document that backing chains are not removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
--driver can now be used to specify a specific driver to bind to the
device being detached from the host driver (e.g. vfio-pci-igbvf), not
just the *type* of driver (e.g. "vfio" or "xen", which are unnecessary
anyway, since they are implicit in which hypervisor driver is in use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adds two new commands and a new option:
- 'net-desc' to show/modify network title and description.
- 'net-metadata' to show/modify network metadata.
- Option '--title' for 'net-list' to print corresponding
network titles in an additional column.
- Documentation for all the above.
- XML Fallback function `virshNetworkGetXMLFromNet` for title and
description for compatibility with hosts running older versions
of libvirtd.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'domcapabilities' command since users might be interested only in
a subset of domcapabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'capabilities' command since users might be interested only in a
subset of capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
For unmanaged ethernet <interface/>, it is user's responsibility
to set up the interface. And as such it can be just anything.
Therefore, it's (almost) impossible for the
virDomainInterfaceStats() API to tell whether RX/TX values need
to be swapped or copied verbatim into the return structure.
Document this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The limits are different with cgroups v1 and v2 but our XML
documentation and virsh manpage mentioned only cgroups v1 limits without
explicitly saying it only applies to cgroups v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In commit c43718ef67 I've added a disclaimer that the new stats which
are fetched from qemu and passed directly to the user are not guaranteed
by libvirt. I didn't notice that per-vcpu hypervisor specific stats are
also snuck into the VIR_DOMAIN_STATS_VCPU group along with other
pre-existing stats we do guarantee.
Extend the disclaimer for VIR_DOMAIN_STATS_VCPU too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Allow users to request validation of the storage volume XML. Add new
flag and virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The node device APIs which get XML from the user don't yet support XML
validation flags. Introduce virNodeDeviceCreateXMLFlags and
virNodeDeviceDefineXMLFlags with the appropriate flags and add virsh
support for the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The original patches adding the functionality neglected to add any form
of documentation for the stats fields returned for this group.
The stats are directly converted from qemu's 'query-stats(-schema)' QMP
command without any further interpretation. The 'query-stats-schema' has
the following disclaimer:
Note: runtime-collected statistics and their names fall outside QEMU's usual
deprecation policies. QEMU will try to keep the set of available data
stable, together with their names, but will not guarantee stability
at all costs; the same is true of providers that source statistics
externally, e.g. from Linux. For example, if the same value is being
tracked with different names on different architectures or by different
providers, one of them might be renamed. A statistic might go away if
an algorithm is changed or some code is removed; changing a default
might cause previously useful statistics to always report 0. Such
changes, however, are expected to be rare.
Since libvirt is not doing any form of conversion of the stats we can't
meaningfully document any of the returned fields. At the same time we
can't even meaningfully provide any form of API stability for the field
names.
Modify the documentation for the 'VIR_DOMAIN_STATS_VM' group both in the
API docs and in the virsh man page to reflect that and disclaim any form
of stability guarantees we provide normally.
Fixes: 8c9e3dae14
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This option can be used as a shortcut for creating a single XML with
just a CPU model name and no features:
$ virsh hypervisor-cpu-baseline --model Skylake-Server
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Skylake-Server</model>
<feature policy='disable' name='avx512f'/>
<feature policy='disable' name='avx512dq'/>
<feature policy='disable' name='clwb'/>
<feature policy='disable' name='avx512cd'/>
<feature policy='disable' name='avx512bw'/>
<feature policy='disable' name='avx512vl'/>
<feature policy='disable' name='pku'/>
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While you can chain the virsh output up to a later 'xmllint' or 'xpath'
command, integrating it into virsh avoids needs for installing extra
binaries which we've often found to be missing on production installs
of libvirt. It also gives better response if the initial virsh command
hits an error, as you don't get an aborted pipeline.
$ virsh pool-dumpxml --xpath //permissions default
<permissions>
<mode>0711</mode>
<owner>1000</owner>
<group>1000</group>
<label>unconfined_u:object_r:svirt_home_t:s0</label>
</permissions>
If multiple nodes match, they are emitted individually:
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
but if intending to post-process the output further, the results
can be wrapped in a parent node
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<nodes>
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
</nodes>
Fixes https://gitlab.com/libvirt/libvirt/-/issues/244
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since virsh implements a wrapper over virDomainSetIOThreadParams()
(command iothreadset) let's wire up new typed parameters there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Useful for knowing how to construct the XML and debugging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Additionally hyperlinks in other parts of the documentation are updated
to match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 42d36b65a3 added new fields to the API docs but didn't add the
virsh man page equivalent.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2073867
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The KVM device assignment was removed in v5.7.0-rc1~103 but virsh
and its manpage still mention it. Don't do that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This wires up support for resetting NVRAM for all APIs that allow
this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When invoking 'virsh guestinfo $VM' without explicitly specifying a
group of information to return, virsh always reports success even when
the guest agent doesn't report any information in the current state.
This is desired in situations when you are okay with stats being missing
and avoids spurious errors being reported.
Clarify that this is really desired in the man page.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041665
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
After attesting a domain with the help of domlaunchsecinfo,
domsetlaunchsecstate can be used to set a secret in the guest
domain's memory prior to running the vcpus.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let's imagine a guest that's configured with strict numatune:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
For guests with NUMA:
Depending on machine type used (see commit v6.4.0-rc1~75) we
generate either:
1) -object '{"qom-type":"memory-backend-ram","id":"ram-node0",\
"size":20971520,"host-nodes":[0],"policy":"preferred"}' \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
or
2) -numa node,nodeid=0,cpus=0,mem=20480
Later, when QEMU boots up and cpuset CGroup controller is
available we further restrict QEMU there too. But there's a
behaviour difference hidden: while in case 1) QEMU is restricted
from beginning, in case 2) it is not and thus it may happen that
it will allocate memory from different NUMA node and even though
CGroup will try to migrate it, it may fail to do so (e.g. because
memory is locked). Therefore, one can argue that case 2) is
broken. NB, case 2) is exactly what mode 'restrictive' is for.
However, in case 1) we are unable to update QEMU with new
host-nodes, simply because it's lacking a command to do so.
For guests without NUMA:
It's very close to case 2) from above. We have commit
v7.10.0-rc1~163 that prevents us from outputting host-nodes when
generating memory-backend-* for system memory, but that simply
allows QEMU to allocate memory anywhere and then relies on
CGroups to move it to desired location.
Due to all of this, there is no reliable way to change nodeset
for mode 'strict'. Let's forbid it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we document possibility of passing an integer from
virDomainNumatuneMemMode enum, we list string variants to only
the first three enum members. The fourth (and so far the last)
member is called 'restrictive' and thus should be documented.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the paragraphs where the topic changes to simplify further
additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've changed the behavior of this API that from now on it will always
restart the VM process and we are no longer able to revert to snapshots
created by libvirt older then 0.9.5.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new parameter group returns information about network interfaces
Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Presumably the result of a copy/paste mistake, the the argument for the
`nodedev-start` command was described as a 'network' rather than a
'device'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
