1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 21:34:54 +03:00
Commit Graph

13 Commits

Author SHA1 Message Date
Andrea Bolognani
a4fbb7bcc7 tests: Add firmware descriptor for edk2 on riscv64
It's available as part of the edk2-riscv64 Fedora package.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2024-07-19 15:18:40 +02:00
Andrea Bolognani
79941dd3c9 tests: Update firmware descriptors
Sync with the edk2-20240524-4.fc39 package from Fedora.

The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.

The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.

Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2024-07-19 15:18:16 +02:00
Michal Privoznik
58b5219961 qemu_firmware: Pick the right firmware for SEV-SNP guests
The firmware descriptors have 'amd-sev-snp` feature which
describes whether firmware is suitable for SEV-SNP guests.
Provide necessary implementation to detect the feature and pick
the right firmware if guest is SEV-SNP enabled.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2024-06-21 09:59:04 +02:00
Andrea Bolognani
8132478fa0 tests: Don't advertise features for edk2-loongarch64
The "acpi" feature is not part of the specification[1],
so it will just get ignored.

[1] https://gitlab.com/qemu-project/qemu/-/blob/master/docs/interop/firmware.json

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-03-07 13:35:05 +01:00
Andrea Bolognani
116a44d65e tests: Add invalid firmware descriptor
This is guaranteed to keep failing even after loongarch64
support is introduced.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-03-04 14:36:41 +01:00
Andrea Bolognani
03a2e01dd4 tests: Add firmware descriptor for edk2 on loongarch64
This fails to be parsed because libvirt doesn't yet know about
the architecture, but thanks to the recent improvements this
is a merely a local failure rather than bringing everything
else down with it.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-03-04 14:36:40 +01:00
Andrea Bolognani
da6b98394b tests: Drop tags from BIOS firmware descriptor
They aren't used for anything.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-08-21 13:51:26 +02:00
Andrea Bolognani
a97c56888c tests: Update firmware descriptor files
These are imported from Fedora 38's edk2 package.

The files that are being replaced date back to RHEL 7 and no
longer represent what libvirt is likely to encounter on an
actual production system.

Notably, the paths have all changed, with both x86_64 and
aarch64 builds now living under /usr/share/edk2 and the AAVMF
name being having been phased out.

Additionally, the 4MB qcow2 format builds have been introduced
on x86_64 and given high priority, effectively making qcow2
the default format across architectures.

The impact of these changes on the test suite is, predictably,
quite severe.

For the cases where paths to firmware files were explicitly
provided as part of the input, they have been adjusted so that
the modern paths are used instead of the legacy ones. Other
than that, input files have been left untouched.

The following expected changes can be seen in output files:

  * where qcow2 firmware was used on x86_64, Secure Boot
    support is now enabled;

  * all ABI_UPDATE test cases for x86_64 now use qcow2
    formatted firmware;

  * test cases where legacy paths were manually provided
    no longer get additional information about the firmware
    added to the output XML.

Some of the changes described above highlight why, in order
to guarantee a stable guest ABI over time and regardless of
changes to the host's configuration, it was necessary to move
firmware selection from VM startup time to VM creation time.

In a few cases, updating the firmware descriptors changes the
behavior in a way that's undesired and uncovers latent bugs
in libvirt:

  * firmware-manual-efi-secboot-legacy-paths ends up with
    Secure Boot disabled, despite the input XML specifically
    requesting it to be enabled;

  * firmware-manual-efi-rw-modern-paths loses the
    loader.readonly=no part of the configuration and starts
    using an NVRAM file;

  * firmware-manual-efi-nvram-template-nonstandard starts
    failing altogether with a fairly obscure error message.

We're going to address all these issues with upcoming changes.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-08-21 13:51:24 +02:00
Andrea Bolognani
3030010fa9 tests: Fix firmware descriptor masking test
Right now we're checking that firmware descriptor masking works
as intended by creating an empty file matching 60-ovmf-sb.json
in name.

However, that firmware descriptors contains the details for a
perfectly valid and quite common situation: Secure Boot being
supported by the firmware build, but being effectively disabled
by the lack of certificates in the NVRAM template.

Unmask that firmware descriptor, and instead create a dummy one
that has higher priority than all other OVMF builds and points
to paths that are obviously incorrect, which should make it
easy to notice it getting accidentally unmasked in the future.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Andrea Bolognani
ba5b338ee3 tests: Add descriptors for QCOW2 format firmware builds
Now that we ignore all firmwares that are not in raw format
while performing autoselection, we can have descriptors for
firmware builds in QCOW2 format without breaking anything.

Note that the descriptors are arranged so that they have the
highest priority on aarch64, but the lowest one on x86_64.
This matches the expectation that QCOW2 will quickly be
adopted as the default on aarch64, where its use produces
significant benefits in terms of memory usage, while x86_64
will likely stick with raw for the foreseeable future.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-03 13:49:56 +01:00
Daniel P. Berrangé
32b9d8b0ae qemu: support firmware descriptor flash 'mode' for optional NVRAM
Currently the 'nvram_template' entry is mandatory when parsing the
firmware descriptor based on flash. QEMU is extending the firmware
descriptor spec to make the 'nvram_template' optional, depending
on the value of a new 'mode' field:

  - "split"
      * "executable" contains read-only CODE
      * "nvram_template" contains read-write VARS

  - "combined"
      * "executable" contains read-write CODE and VARs
      * "nvram_template" not present

  - "stateless"
      * "executable" contains read-only CODE and VARs
      * "nvram_template" not present

In the latter case, the guest OS can write vars but the
firmware will make no attempt to persist them, so any changes
will be lost at poweroff.

For now we parse this new 'mode' but discard any firmware
which is not 'mode=split' when matching for a domain.

In the tests we have a mixture of files with and without the
mode attribute.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-02-23 18:11:08 +00:00
Michal Privoznik
31eb3093c0 qemufirmwaretest: Test qemuFirmwareFetchConfigs()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 15:29:44 +01:00
Michal Privoznik
04406d87d2 test: Introduce qemufirmwaretest
Test firmware description parsing so far.

The test files come from three locations:
1) ovmf-sb-keys.json and ovmf-sb.json come from OVMF
package from RHEL-7 (with slight name change to reflect their
features in filename too),

2) bios.json and aavmf.json come from example JSON documents from
firmware.json from qemu's git (3a0adfc9bf),

3) ovmf.json is then copied from ovmf-sb.json and stripped
of SECURE_BOOT and REQUIRES_SMM flags, OVMF path change,
description update and machine type expanded for both pc and q35
machine types.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2019-03-12 15:29:44 +01:00